Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

Temperatures are still mild enough that you likely aren’t thinking about the implications of snow and ice just yet, but now is actually the perfect time to start considering it, and deciding what you’re going to do about it when it hits.

A driveway heating system will help you with the inconvenience of shoveling snow and the safety concerns involved with walking on icy surfaces, but what about your roof? Winters are particularly harder on roofs than any other season, especially if you have an asphalt or shingle roof.

The buildup of ice and snow adds weight to your roof that it is not designed to handle. Your roof is your home’s first line of defense against inclement weather, but it can only take so much pressure. The ice that forms in the winter creates ice dams—formed from melted snow refreezing and creating a blockage—as well as gutter ice.

Gutter ice can cause gutters to become too heavy and rip away from your home. Not only does this mean you’ll have to repair and/or replace your gutters, you may also have to contend with the property damage that this could very well leave behind.

Even without ice as a factor, snow itself poses a risk to your roof. This is especially true if you have a flat roof, or an older home with a weakened roof structure already. The problem is that as the snow builds up, it creates too much weight, and your roof can crack or even collapse under all the strain.

The solution to this problem is having roof heating cables installed. These cables do just what the name implies: they keep your roof warm so that snow and ice never have a chance to buildup. Rather, it melts upon impact and drains from your gutters and downspouts just as rainwater would.

Sale posters and coupons aren’t the only ways to make sales. You can use lights to your advantage, too. LED retail lighting can be used to create an environment that makes shoppers feel welcome and caters to their needs and expectations. Use LED store lighting to draw people in, to keep them focused, to guide them throughout your store, and to save money. There are so many ways that the right lighting can be beneficial to customer satisfaction and sales. Take a look at the following list of do’s and don’ts to achieve store lighting that will help you reach your goals.

There’s more to effective LED retail lighting than meets the eye. Creating an efficient lighting system that looks how you want while promoting products, making customers feel comfortable, and, in turn, increasing sales involves knowing the technical details of potential bulbs and fixtures. These details include efficacy, color-rendering index (CCT), and intensity.

Intensity/Lumens

In the past, the brightness of incandescent, halogen, fluorescent, or high-intensity discharge (HID) lights was measured by wattage. Now, a common method for measuring brightness is lumens. The higher the lumens, the brighter the bulb. Comparable wattage is always listed on our product pages for compatible products. If you’re upgrading from incandescent to LED and want a bulb or fixture that’s similar in brightness, you can use lumens for an estimate of what incandescent wattage would be. Simply remove the last number of the lumen value. The number that’s left represents estimated incandescent wattage. As an example, an LED light that emits 600 lumens is approximately as bright as a 60-watt incandescent bulb.

Efficacy

As a business owner or manager, you’re most likely concerned with getting the biggest bang for your buck. By paying attention to efficacy, you can make sure that you get the most light for the amount of power the bulb or fixture consumes. Efficacy is the amount of visible light that is produced with a certain amount of power (watts). You can determine the efficacy of a product by dividing its lumens by the watts it consumes. For example, a bulb that emits 480 lumens and consumes eight watts of power (480/8) has an efficacy of 60 lumens per watt. A bulb with this efficacy would be a much better option than one that emits 480 lumens at 12 watts.

CCT

CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. CCT is measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

The color temperature you choose will depend on the mood and shopping experience you want to give your customers. A retailer like Hollister for instance, who strives to create a laid-back, relaxed atmosphere, utilizes warm white and even ultra-warm white lights. Add on the cozy furniture setup and music and it’s clear that the goal is to get customers to hang out, relax, and spend more time in their store. Logic says that the more time you spend in a store, the higher the chances are that you’ll buy something.

Bed Bath and Beyond, on the other hand, uses a different approach to make sales. Their stores are filled with bright natural white light to showcase the wide variety of products that they offer. Customers are going to struggle in a store like BBB if it’s dimly lit. Knowing whether or not a shirt looks good is a lot different than buying new pots and pans. Dim light is flattering and more forgiving when customers are trying on clothes, but it won’t help you read whether or not your pans are dishwasher safe or scratch resistant. The lighting you choose should mesh well with the products you’re trying to sell. Using lighting to set the mood is a great idea so long as that mood doesn’t impact a customer’s ability to shop.

One of any retailer’s main goals when choosing lighting is to make sales. Use light to your advantage when trying to highlight certain things or create visual appeal. Make it obvious where new arrivals or sale items are. Use light to create a path that will guide customers through your entire store. Use LED sign modules for your store window or LED light boxes that feature your products. Anything unique, whether it’s cove lighting, lighting under a set of shelves, decorative light fixtures, or simply how you arrange your lights, is more likely to catch someone’s eye.

There are so many retail lighting options to choose from. Take a look at the list below to see some of the possibilities.

LED tube lights for fluorescent light fixtures

LED strips or puck lights for display case and shelf lighting

Retrofit can lights

Sign modules for store windows or creating custom signs

Canopy lights for outdoor overhangs

If your floor plan is constantly changing, it might be best to install a retail lighting system that can be changed as well. Track lights or gimbal and eyeball can lights can all be aimed in different directions. Depending on the products you’ll be displaying, you might also want to order new bulbs of varying intensities or color temperatures for these fixtures.

There are numerous places that are easy to overlook when planning your retail lighting project. Don’t forget the fitting rooms. This is where shoppers ultimately decide if a clothing item will work for them. Natural or warm white light is best, and a high-CRI LED light will show colors most accurately.

Illuminate aisles to guide customers through the store. Shoppers shouldn’t feel like they’re lost in a maze. Give them a sense of direction to know how to get where they want to go.

Don’t make it hard for customers to leave your store. Use LED light bulbs for exit sign backlighting and spotlighting. These lights are especially important during power outages or in emergencies.

If you’re putting your products on shelves, overhang from other shelves can cause shadows or limit light to the area. LED strip lights are a great solution for this. They have adhesive backings for easy installation, and most can be cut to fit the area that needs lighting. If you’re not crazy about the look of a strip under your shelves or if you want to eliminate hot spots (bright points of light), you can create your own LED strip light fixture using an aluminum channel and diffusing lens.

Make sure the checkout and customer service areas can be found easily in your store. Use different lighting or more lighting to make it stand out. Get creative with LED strip light fixtures around the counter, an edge-lit sign, or a custom-printed LED light box.

You might think that your parking lot has nothing to do with sales, but that is incorrect. If your parking lot is dimly lit, your store is not only less visible, but it’s also not as safe as it could be. A poorly lit parking lot can make customers feel uncomfortable and can lead to accidents. It can also be a problem for capturing security footage.  

blog post for more information.

To see more retail lighting options, visit our commercial lighting category, indoor and outdoor LED lights can also be found in our light box, fixtures, landscape categories.