As a homeowner, you tend to notice electrical issues like flickers, breaker flips and outages. But keeping an eye on your electrical meter is important too! Without the occasional peek, you could find yourself with higher than average bills, or even a completely unexpected shut off.

The certified electricians at Kolb Electric naturally have spent loads of time with electrical meters, and we’ve got plenty of good information to share this week. Follow along to learn about issues that may arise with your meter, what they mean, and whether or not they indicate a faulty electric meter.

Hard to find a problem if you can’t find the meter, right? Electric meters are most commonly located on an outer wall; usually near where your power line runs. In some homes, particularly older ones, the meter might be found in the basement or a utility closet.

If you live in an apartment, the meter is almost always found near your building (or on it) in a cluster. The cluster houses meters for every unit, and all of them should be clearly labelled with the apartment number on them.

Do be aware that the chances of your meter being outright faulty are fairly low. The machines have exceptionally long lifespans, and are built to endure. It’s more likely you have one of many other electrical concerns, however, it is always best to check with a certified professional electrician if you have any questions or problems. While uncommon, a faulty meter is a pretty big issue, and you don’t want to leave it to chance. Just don’t be surprised if the issue turns out to be something else!

Whether you’re worried about your meter, or you’ve got any number of other electrical problems, the experts at Kolb can help! We provide our consumers with only the absolute best, both in service and skill, and we’re confident in our ability to meet your unique needs. Contact Kolb today to learn more!

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

• True to form

• Tailored and elegant

• Clean lines and natural hues

• NEW and Exciting!

A burst of crystal, metallic ribbons, streamers and champagne glasses, if this contemporary winner from Corbett Lighting does not set the scene for a good time, you need to find a new playgroup!  Finished in Modern Silver, “Party All Night” from Corbett Lighting is cutting-edge contemporary with the fun and flair of whimsical style.

“Aleeka” from Kichler Lighting is a swirling mix of concentric circles and shaded orbs.  A fascination of motion with a Classic Pewter finish simply and elegantly defines modern-contemporary style.

“Starfire” from Maxim Lighting takes xenon illumination to the next level. Polished Chrome and Beveled Crystal deliver a sparkling exuberance that is exciting and unique.

“Barclay” from Savoy House exudes strength and an edgy, trend-setting style.  The Gilded Bronze finish, mesh drum shade and cascades of  handcrafted chain brilliantly integrate Mediterranean and industrial characteristics.

“Jennings” from Crystorama showcases classic contemporary in an intricately designed metallic shade.  The Polished Nickel geometric cutout is attractively illuminated around the crisp linen drum shade.

“Pearla” from Eurofase combines LED light sources, a polycarbonate diffuser and a hand-polished chrome finish.  Like a strand of fine pearls,  this contemporary whirl of illumination is substantial and opulent.

“Travis” from Hudson Valley presents an ultra glamorous sophistication reminiscent of the “Golden Age” of cinema and Hollywood Regency style.  Sleek and elegant, prisms of cut glass encase candle holders for a fascinating play of illumination.

“Quill” from Hubbardton Forge is a marvel of rectilinear and planar geometry with branching structures and feather-like plumes in a Vintage Platinum finish.  LEDs and infinitely adjustable horizontal or vertical cable offer a fantastic array of hanging options and lighting effects.

“Corfo” from Eurofase offers a playful visual symposium like a crystalline rainfall embedded in Chrome coils.  Decorative light sources emanate a dazzling illumination within this powerful lighting design.

“Flagship” from Access Lighting makes a show-stopping presentation.  Metal panels, robust peripheral light sources and a powerful downlight offer ideal illumination, handsomely designed with timeless, contemporary grandeur.

The Dallas Market

Professional lighting consultants from Capitol Lighting have meticulously reviewed hundreds of showrooms filled with the latest LED innovations, as well as contemporary dining room fixtures, portable lamps, outdoor lights, ceiling fans and chandeliers from elite lighting manufacturers around the world, including top vendors in the US, Europe and Asia.