ballast-compatible LED T8 tube for office lighting, school lighting, hospital lighting, basement lighting, and more. The energy-efficient F32T8 tube light can be used in direct-wire fixtures or to replace T8 tubes in fluorescent fixtures without removing ballasts. Designed to last 50,000 hours—5 times longer than fluorescent tubes—the LED T8 tube reduces costly repairs, disposal fees, and the need for replacements. This energy-efficient LED light uses just 18 watts of power and is comparable to a 32-watt fluorescent tube light.

With the start of the school year and the holiday season approaching, it seems as though the mound of expenses just keep piling up. You’re budgeting for school shopping, lunches, holiday shopping and making sure your lights stay turned on. This season tends to be the most expensive for many home owners.

Luckily, we have a few ideas on how to cut back on utility bills and lower your electric bill. We also provide home inspections for everyone in the Northern Virginia area and look at ways you can utilize the most out of your electrical appliances. You may be heading into a time filled with many expenses but you can pad your pocket with money saved from lowering your utility bill. Check out these tips that will help you with your utility bills and give you peace of mind during this hectic season!

Install Dimmer Switches

When you install dimmer switches, you can use only as much light as you need. With a traditional light switch, the only settings are on and off, meaning you are either using 0% electricity or 100%. With a dimmer, you have an entire spectrum of settings in between. Being able to decrease the amount of light you use inevitably results in lower energy bills. Install dimmers in the rooms you use the most like the kitchen, living room, bathrooms, and bedrooms; this will allow you to take advantage of the greatest savings possible.

Keep Your Fridge and Freezer Full

Everyone always tells you to keep the fridge closed. But did you know that keeping your fridge and freezer full can also save money? Food acts as insulation and lessens the amount of time that the fridge has to run to stay cool. This will be easy to do with all of those lunches your family will have to pack for school and for the Thanksgiving and Christmas holidays.

Install Ceiling Fans

Keep the air circulating in your home, and your air conditioner won’t have to work as hard. Ceiling fans can help lower your electric bill by up to 30 to 40 percent. While a ceiling fan doesn’t actually decrease the temperature of a room, the draft makes the room feel cooler – allowing you to raise the thermostat and be just as comfortable. You can even use your ceiling fans in the winter months! Many people are unaware that ceiling fans can be used to circulate warm air during cooler months of the year. By running the blades clockwise, ceiling fans push warm air down from the ceiling without creating a draft.

Get Rid of “Phantom Loads”

A shocking 75 percent of the energy used by home electronics is consumed when they’re turned off. These “phantom” users include: televisions, videogame consoles, stereos, computers and many kitchen appliances—basically anything that holds a time or other settings. A simple solution? Plug all of these items into power strips; then, get in the habit of turning off the strips between uses.  This will cut back on utility bills and will help combat overloading fuses.

Switch to LEDs

LED light bulbs use 90 percent less energy than incandescent bulbs. Switch out the most widely used bulbs in your home. Then, replace the rest as they burn out. LED lights tend to last much longer than traditional bulbs so you won’t have to replace them as often – saving you money.

Tangled wires are a pain in the neck. That's true whether you're managing multiple devices at your computer desk, trying to find space at a cluttered kitchen counter or juggling power tools at your workbench. One way to bring order to chaos is to create an overhead power strip, a project you can DIY with some very simple electrical work. Read on for some tips to get started.

A Simple Solution for Your Electrical Work

To create the most basic version of an overhead power strip, all you really need is a piece of wood, some screws, and a mountable power strip (look for one that has slots for screw heads in the bottom). For added convenience, a plastic raceway or access to a router tool will be helpful to secure the power strip's cord to the wood.

The first step, in that case, is to either use the router to cut a slot in the wood that can hold the cord, or attach the raceway to the wood for the same purpose. Make sure you leave room to attach the power strip itself, and there is enough cord left at the other end to reach the nearest outlet.

Securely Installing the Strip

Next, measure how far apart the screw slots are on the back of the power strip, and mark the distance out on the wood. Install appropriately-sized screws at the marked spots, leaving some clearance under the screw head so the power strip can easily slide on and off. Test out the setup and make sure that the strip fits and can hang securely upside down – if it's loose, you may have to adjust some of the screws.

Finally, you need to decide how to mount your overhead power strip. Options include hanging it under a kitchen cabinet or shelf on the workbench, affixing it to a wall, or using a post to hang it closer to the center of a room. Remember, this power strip is for your convenience, so you want to position it where it will be most useful.

Customize the Power Strip to Your Convenience

Of course, once you get the idea for how to hang a power strip, you can then customize it to your liking – for example, putting a hinge on the end allows you to swing it back against the wall when you aren't using it. You can also branch out with many of the modern, innovative power strip models on the market to customize your workspace even further.

For help keeping your cords in order, or assistance with any other electrical work, contact an expert electrician today.

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.