Love is in the air, which has gotten me to thinking about lighting. (Come to think of it, what time of year doesn’t do that?) If Valentine’s Day always gives you a hankering to pop Gone With the Wind or your favorite rom-com into the DVD player, have you ever thought about what goes into making those romantic films?

Color temperature is one of the first things to note when studying the lighting in a romantic scene. Is it orange? Bluish? White? Most often, warm colors add to an inviting, romantic atmosphere. For example, the warm light in this sunset scene in Titanic draws the audience in, unlike the cold, blue lighting later in  the movie, after things get dire.

2. Brightness (and Shadow)

You can judge the quality of light in a film scene through the hardness or softness of its shadows. Hard quality light has dark shadows with sharp edges, and often feels more raw than soft quality light. Soft lighting, often used in older films, has lighter, diffused shadows and tends to feel more sentimental. If you’ve seen Casablanca, you know what I mean.

Of course, there are always exceptions to these rules.

Cool lighting can still be quite romantic in the right setting. Like in this still from The Notebook:

And with advances in film technology, sharp shadows can also be quite romantic. Case in point, this still from the end of the 2005 version of Pride and Prejudice:

Let’s face it—halogen and incandescent headlight bulbs are a thing of the past. fanless, driverless LED headlight bulbs were used in this installation.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points. Repeat these tape lines for your other headlight.

6. Remove your headlight assembly if necessary, remove the current bulbs, and install your new LED bulbs. Check your owner’s manual for specific instructions on how to replace your headlight bulbs.

7. Depending on your vehicle, you may have to adjust your headlight beam before or after the assembly has been reinstalled. Your owner’s manual will explain how to adjust the beams. Align each headlight so that the top edge of the beam is at the same height as your horizontal line(s). If your headlights can be adjusted horizontally or produce two light cutoff points, use the vertical tape lines to align them properly.

3. Shake the vehicle to ensure that your suspension system is settled. For more precise adjustments, inflate all tires to their designated psi capacity and have someone sit in the driver’s seat. Also, make sure that your vehicle’s gas tank is at least half full.

4. Measure from the ground to the center of your headlight assembly where the bulb is located. This step must be done for all vehicles. If your vehicle allows for horizontal headlight adjustments in addition to vertical adjustments, it’s important that you also measure the distance between the centers of both headlight bulbs. The vehicle featured in this video allows for vertical headlight adjustments only; therefore, center lines aren’t necessary but are shown for demonstration purposes.

5. Turn on your low-beam headlights. Using painter’s tape, mark your headlight measurements on a flat wall. Measure from the ground up, and apply a horizontal line of tape to the wall; this line represents the top of your headlight beam. You can either apply one long, continuous line or small sections where the brightest areas of the headlight beams are shown.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points.

Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

Electrical transformers come in various sizes and shapes and there is a distinct possibility that you have seen one in the area your business is located in. The larger transformers are typically grouped together and are found in power plants and isolated and fenced-off areas.

While most people know that they shouldn’t get too close to these installations, most aren’t sure what the purpose of these transformers is and how they work. Here is some more information that will give you clarity about this.

These are essentially electrical devices that are used in transferring electricity from a higher voltage to a lower one and vice versa. Most of the electrical transformers are designed to serve the latter function. Without using too much of technical terminology, here is a short explanation of what they do – The process via which energy is transformed is called electromagnetic induction; this uses a magnetic field right through the process.

There are transformers of different types and they all serve different purposes, based on the scale of the project and output requirement. In household applications, they are used to power equipment and appliances as well as kid’s toys. The power that is generated from the large power plants is generally just too powerful for the application it is to be used in. This is where a transformer comes into the picture. It downsizes the electricity and turns it into the required voltage which then gets transferred via coils.

Apart from powering equipment and appliances in your home, electrical transformers also have a massive impact on our daily lives. Most homes and businesses aren’t situated close enough to a power plant. How then do these establishments and homes get the amount of energy they require to function correctly?

This is the point at which transformers come in use. The technology used to drive these transformers gives them the ability to transfer energy across long distances at quite an impressive speed.

Transformers are categorized in many different ways, based on their application, construction and purpose. The different types of transformers are:

Aside from these, the types of transformers used in residential and smaller commercial uses are:

The pool at your Tampa home is an excellent place to enjoy recreation, to relax, or even to host events and parties. But are you getting the most out of your pool design? The use of light can add not only dynamic appeal to your space, but provides a greater level of safety. Not to mention the fun of a nighttime pool party!