Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

As summer comes to a close, it is time to get ready for the fall cleanup season. This is a great time to have your outdoor lighting inspected, revamped or replaced by your electrician in Los Angeles. Summer storms and typical wear and tear will often result in broken lights or bulbs that need replacing. Although you may not be planning on spending as much time outside during the cooler months, lighting provides safety as well as enhances the appearance of a home. At The Electric Connection, we know how important it is to maintain a gorgeous landscape no matter how cold it is outside.

This is also a great time to review your current lighting scheme and make adjustments to areas you may have noticed were a little more shadowy than you would prefer. Take the time to note these areas and then call your electrician. Los Angeles homeowners have plenty of options when it comes to creating a beautiful, well-lit landscape.

Maybe you have taken advantage of some of the end of season sales and need some help hooking up that beautiful new water feature. Or maybe you have a new piece of yard art that deserves some special lighting to highlight it during the shortened days.

While you do have the option of using solar lights, winter months make it very difficult for the lights to charge. They will often go dark before the sun rises due to the limited amount of charging time allowed during the shorter days. For this reason, many people opt for outdoor lights that are electric. They tend to be more reliable and will stay illuminated throughout the entire night. If you would like to learn more about having electric lights installed in your landscaping give The Electric Connection a call today.

Generally speaking, home and business owners in Rockville are told to avoid the use of technology to accrue higher monthly/yearly energy savings. But what if we told you there is tech out there that is specifically meant to aid in saving electricity and reducing your usage? It’s true, and the certified electricians at Kolb Electric are here to talk about them!

We’ve been supplying top-tier electrical services in Rockville for years. Nothing is more important than your satisfaction and happiness, and whether you need installation, repair, or just a bit of fun information, we’re more than happy to provide!

There is actually a staggering number of tools and equipment out there for saving you energy and providing environmentally-friendly advantages in Rockville. Our favorites include:

When you need high-quality, dependable service from certified electricians in Maryland, DC, or Virginia, you can always count on the team at Kolb! We make your needs a priority, and for electrical services in Rockville, there’s simply none better!

Radiant heated driveways have become a very popular option for homeowners across the Midwest and east coast, where winter temperatures often present quite the challenge to homeowners with the snow and ice that they bring. Can you imagine never having to shovel snow off your driveway again?

Imagine the convenience! True, you won’t be able to claim a “snow day” to get out of going to work, but at least you can leave your house on a whim. But what exactly are heated driveways, and how do they work? Will you need to have maintenance done on them? Keep reading to learn more.

Driveway heating systems use radiant heating technology to warm concrete, asphalt, pavers, and various other floor materials—whatever your driveway is made of a heating system can benefit you. The difference is, the installation of a driveway heating system is much easier and less invasive than a typical radiant hydronic heating system.

You still certainly need a professional to install the system, and it does require the driveway to be laid down after the installation of the heating system, but we’re happy to talk to you about your options!

Also called snow melting systems, driveway heating systems uses a sensor to detect moisture, which signals a controller to supply power to the heating cable, which then warms the driveway. This prevents snow and ice from even beginning to accumulate, removing the inconvenience for you while you sleep or otherwise enjoy being indoors out of the elements!

Snow melting systems have very, very few components. It’s true that age and natural wear and tear may eventually necessitate a repair or eventual upgrade someday. However, these energy-efficient systems are relatively maintenance free. Still though, it would be wise to have our technicians check out your system on perhaps an annual basis—before winter—just to ensure everything is functioning as it should.