Hi Nick,

Mike and I just wanted to thank you and Rick for the excellent service yesterday, a Sunday during a major power outage at that.  From the time I placed the call for help to the time Rick walked out of our soon-to-be-warm-again home, it was only an unbelievable 1.5 hrs!!  I so appreciate your ‘straight-shooting’ with me on the phone about whether our problem could be Oncor related or in our wiring and the option to switch our dead furnace thermostat to the one working leg of power we seemed to have.  Rick arrived just when he said he would, went right to work and determined that we were indeed receiving full power from Oncor, but one of our breakers was bad.  He replaced it, checked things out and was on his way.

You have impressed us with your quality of service.  We certainly will use you again and recommend you when someone asks if we know a good electrician….we do now!

Transforming a basement into livable space is a big deal. It requires a lot of planning, work and execution. If you have a basement, you have a lot of space down there that you could be using to entertain, as bedrooms or simply to add value to your home. When done correctly and up to code, your basement can count towards the total square footage of your home. Every additional square foot adds anywhere from $50 to $200 to your total value depending on where you live. An electrician in Glendale, like those at The Electric Connection, can help you get that remodel underway and up to code in no time.

Basements are generally already wired with electricity, but the lack of walls, ceiling and more than a cement floor are an issue. Once you add flooring and put in a ceiling, the ceiling height tends to be a bit smaller than the average. However, it is still functional and as long as it meets the building code, you can make it work. Now, basements tend to be dark, but you can change that with the installation of recessed lights by an electrician. Glendale homeowners will not have to worry about losing any head room with these lights because they are flush with the ceiling.

You can add several lights that will really brighten up the space. Whether you are transforming your basement into a den or the ultimate game room, you want to preserve as much ceiling space as possible while providing plenty of light. If you are dividing the area into separate rooms, your Glendale electrician can add the wiring needed for the outlets as well as the light switches needed to operate the lights in each space. A basement remodel is a fun project that is rewarding and will provide an excellent return on your investment. Give The Electric Connection a call today and schedule your lighting installation.

For some, flickering lights are an annoyance and can be a distraction. Others don’t notice the inconsistency in the lights. But, that fluctuation in light can signal problems in the circuitry or light fixtures in one’s home. Depending on the source of the problem, it could lead to serious safety issues in a home.

All lights flicker to some extent, based on the amount of power that is coming into the lines in your home.  If your lights flash or flicker regularly, it’s often a sign that there’s a problem – either in connection or power use. Situational flickering – like when an air conditioner starts – is a sign that there’s an issue with power supply. Simply put, the dip of the lights when the AC unit starts up occurs because the AC pulls the available electricity supply from the light. It’s usually temporary. It may also be a sign that the outdoor AC unit isn’t wired for maximum amperage. If the flickering lights aren’t related to a large appliance powering up and running, it’s a sign that there are issues – home may be brighter and more comfortable.

A variety of ways exist to quickly and efficiently complete an electrical installation. One method involves using pre-made and pre-fabricated conduits, cables, panels, and devices. Pre-fab strategies cut down on repetitive labor costs and scrap material waste.

Furthermore, pre-fabricated components are assembled in quality-controlled factories by highly trained technicians. This ensures that every device and termination is in working order and properly connected. These technicians work faster and cost less per hour than a journeyman electrician, therefore saving the contractor time and money.

Another option to increase efficiency involves using pre-wired devices. They can be used for repetitive tasks like receptacles, switches, light fixtures, data ports, or fire alarms. They save time by eliminating the need to terminate each device individually. Instead, boxes are made to order and ready to install. The desired length of cable is attached and ready to run to the nearest junction point. Simply attach the box, route the cable, and connect to the supply wires. Most suppliers prepare a custom quote, further reducing time spent by the foreman planning and ordering parts individually.

Pre-wired panels are possibly the simplest way to save money, as they require no special tools. Wiring up a panel at the shop before heading to the job site allows you to function test it before installation. This ensures proper functionality. In addition, it keeps the interior of the panel away from weather and other possible sources of job-site damage. For larger or more complex panels, suppliers can be arranged and have the work performed by specialized technicians. Panels can even be ordered with pre-cut and pre-terminated lengths of cable or cord.

Most electricians have used pre-formed conduit, especially PVC which requires specialized tools to bend. However, entire runs of pipe can be custom ordered and pre-shaped. Especially useful in underground conduit networks or when complicated bends are required, these pre-made conduits drop in place and fit perfectly to the engineer’s prints. They also ensure that conduits are not damaged or kinked during the bending process and that no sharp edges or rough spots are left to damage wires or cables.

If the project demands it, entire buildings can be pre-made and pre-wired in a factory setting by trained technicians who specialize in quickly and efficiently preparing custom ordered buildings. Especially useful in industrial settings, these buildings come complete with all interior and exterior lights, switches, receptacles, and control wiring.

Often, motor control centers (MCCs) for large industrial installations are constructed this way. Therefore, on-site electricians are free to begin immediately running cables to motors and devices, with simple termination points inside a completed building. In addition to using fewer electrician hours, they also reduce required hours from other tradespeople such as welders or cladding installers.

Finally, pre-fab strategies are a great solution for reducing material waste, worker hours, and downtime while making deadlines a snap. Projects run smoother with fewer errors.

We usually expect to find wiring troubles in old homes where the wires are made from out-of-date material that is no longer up to code. But electrical repair needs can crop up in the most modern homes: all it takes is a bit of shoddy installation or damage to a few connections and you can end up with wiring that malfunctions, leading to power loss or—in the worst case scenario—an electrical fire.

Do not attempt any repairs to your wiring yourself unless you are a trained electrician with access to pro-level tools. High-voltage shocks are something to take seriously. Pick up your phone instead and put in a call to your local electrician and arrange for repairs.