LED pole lights provide an opportunity for businesses, industrial buildings, and other larger outdoor venues to have access to a high-quality source of light that’s energy efficient. Pole lights are the most common option for outdoor lighting of parking lots, walkways, neighborhoods, and building grounds. That is because this type of fixture creates a large amount of illumination through a beam, which the user can direct in a specific area. Before buying LED pole lights, buyers need to consider a few key factors.

Commercial, residential, or industrial uses are acceptable options for LED pole lights, depending on the specific model selected.

Key considerations when making this purchase include the following:

Comparing all of your options is important. Finding the right balance isn’t just about costs but quality of the product and long-term options.

Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

With all the bad weather we have been hammered with this winter, our electric power stations have been maxed out trying to keep up with the demand for electricity.  With the cold, another problem has been water pipes freezing at the electric generating stations causing them to have to shut down for repairs.  Long story short, over 55 million people in America this year have dealt with power shortages.  Either being rolling blackouts, or simply no power for days.  I have received multiple inquiries from customers wanting to know if there is an alternative means to keeping the electricity on in their home without using a gas-powered generator.  Their reasons for not being able to use a gas powered generator ranged from “I live in a HOA where generators are not allowed on the outside of our home and I can’t put it on the inside due to noise and fumes,” to “I don’t have any place outside to put the generator that guarantees it won’t be tampered with or stolen.”  Some of my customers that live in condos or town homes only have a balcony which really “limits them on space.”

Circuit breaker problems can make life difficult with a host of harmful effects, but most importantly, they are a safety hazard. Circuit breakers keep you safe from dangerous amounts of electrical current. When they aren’t working properly, there could be a risk of damage to your possessions or even losing your home to a fire. To keep yourself and your family safe, stay on the lookout for the signs of circuit breaker problems. The sooner you identify them, the sooner you can get them taken care of by a professional.