Purchasing a new home can be both an exciting and stressful experience. While you may like what you see on the outside, we all know that there can be problems hidden behind the walls. When it comes to electrical, not only can improper work cost you lots of money, but it can also be dangerous. If you are browsing for a new home, make sure you are cautious of possible issues that can arise.

As we have written about in the past, the main service panel is a critical part of the home electrical system. This is what controls the electricity in the entire home. Over the years these panels can become old and worn. Sometimes additions may have been made to the panel, but not done correctly. When looking at a service panel it is important to look for any loose or wires and connections into the panel. The wires should be tight to avoid electrical outages and flickering. Loose wires can also cause sparking and lead to fires. An expert electrician can also identify the amount of wires going into each circuit breaker and the organization, which can help with safety and efficiency.

One concern many people have is what kind of wiring is behind the walls. Many of us have heard of aluminum wiring and that we should avoid it. The problem with aluminum wire is that the wires can become loose more easily and also heat up, becoming more prone to electrical fires. Old knob-and-tube wiring can also become weak, break easily, and cannot function at today’s standards. It is a good idea to have an expert electrician inspect the wires in your prospective home to make sure they are safe or whether they need to be upgraded.

Outlets in the home should also be easily tested. Check to make sure that none of the electrical outlets look burnt, dirty, or are loose. Outlet testers can be test to make sure that they are properly grounded and being fed electricity properly. It may appear that the outlets function properly and can continue to do so without being properly grounded. But in the event of a power surge, especially in a major appliance, the electricity will not escape through the grounded wire and can cause electrocution.

These are just some of the potential electrical problems that a home can have. In order to protect yourself and your investment, have a home inspector visit the home. If you have just purchased a home, have an electrician inspect it for any possible issues and for a more thorough analysis.

We often find there is a lot of confusion between Lumens and Foot Candles and Lux. And even more confusing is how some represent conversion from traditional light sources like Metal Halide and High Pressure Sodium in terms of watts, and not lumens. So why all the confusion. Well, it may be because those who represent this conversion are trying to avoid letting you know about the efficiency of the LED lights, so they claim you can replace X watts of Metal Halide with X watts of LED. What they should really say is that you can replace a 400W Metal Halide with X lumens, and their lights only need Y watts to produce these lumens. We’ll dive into this a little later, but lets first talk about lumens vs foot candles vs lux.

What is a lumen? A lumen is a measurement of light related to (1) fixture or bulb. So when we talk about lumens, we say that a fixture or bulb creates (X) lumens. These lumens are determined by sophisticated measurement equipment.

What is a foot candle? A foot candle is a unit of measurement at a specific location in a room or outdoor location that is created by 1 to many lights. It is a cumulative reading of 1 to many light sources at a specific location. It is both real and calculated. Real in the sense that you can take a light meter and walk to any location in a room or outdoor location and take a reading that represents the amount of light recorded from all contributing lights or fixtures. Calculated in the sense that you can use software to predict the foot candles of a space based on the placement of lights within the simulation.

What is lux? Lux is identical to foot candles. It is a measurement of real or calculated light, but it is done on a different scale. As a rough estimate, 1 foot candle = 10 lux.

So, simply stated, lights produces lumens, and the cumulative lumens of all lights are then determine the foot candle or lux measurement of light at a specific point in an indoor or outdoor space.

Where a regular and reliable power supply is important in Downingtown PA or surrounding areas, people are increasingly turning to generator backup systems for continuity and peace of mind. Ensuring your Downingtown, PA home has a top class reliable installation to keep the electricity flowing is achieved by using a skilled electrical contractor.

Usually powered by fossil fuels, the amount of power output that generator backup systems provide is linked to the devices and requirements of your home or business. Modern generators will be automatic, so any loss of power from the regular supply will be compensated for straight away by the fuel powered system.

The benefits of generator backup systems are:

– keeping your freezer contents frozen – having critical security systems always powered up

The systems can supply anywhere from small output (say 7kW) up to a far larger capacity (say 45kW) for a large house or where there are lots of power hungry appliances. The larger systems often have a number of key features to enable their location and output to be optimized, such as overload protection, outdoor and rust-proofing technology, battery chargers and oil meters to let you know exactly what capacity of the generator backup systems’ power is available.

Technology also allows the transmission of the status of the generator to other locations in the home or business, so you don’t need to go to the basement or outhouse to find out how much power the generator has, or what is being consumed when the generator is needed.

Fitting and locating generator backup systems is definitely a job for your local electrical contractor, and for larger installations, there may be building regulations and other paperwork to get through from choosing the ideal generator to having the installation ready to go.

Downingtown PA Residential generators are commonly used where refrigerators, hot water heaters and security systems need reliability and backup from a main power source.

In conclusion, where outages are common, or where absolutely required by the local circumstances, having generator backup systems stand by with power for when you most need it is a wise and sensible investment within Downingtown PA and surrounding areas.

For an Affordable and reliable Downingtown, PA Generator Backup system consultation / installation, call (610) 269-4136 or click here.

Regardless of whether you’re a burgeoning chef or someone who prefers to keep it simple, you rely on your stove day after day to help you prepare meals for your family or friends. Make sure your home is equipped with the right kind of stove – either gas or electric. If you grew up using only a gas or electric stove, you may be partial to that one. However, it’s important to know the difference between the two so that you can know for sure if you’re missing out on certain qualities you could benefit from.

If you have little ones, you may prefer to use an electric stove, as a gas stove produces visible flames that could harm their tiny hands. On the other hand, if you’re a cooking savant, you may prefer to use a gas stove for its accuracy and versatility. If you’re considering replacing your stove soon, take these factors into consideration.

A stove should last you on average 13 years; therefore, it’s important to invest in one that you will love. After all, you’re going to be stuck with it for quite some time. On average an electric stove will run anywhere from $450 to $2,800, while its gas counterpart will run from $400 to $2,500. The price difference between a gas stove and electric stove is close to negligible. This is why it’s important to take into account the operating costs of each type.

Consider your state’s natural gas cost and compare it to the electricity rate. In most states, natural gas costs less than electricity, which would indicate a lower operating cost.

Before purchasing a new stove, take note of what all you like to cook, as well as how often you cook. An electric stove takes longer to heat up and doesn’t respond as quickly to temperature changes. Further, if you’re a chef, you won’t be able to char, toast, or flambé your food. A gas stove reacts almost instantaneously, allowing for efficiency and accuracy. If you’re the kind of person who prefers take-out then your best option may be an electric stove.