Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

Electrical engineers usually have a huge responsibility in implementing safe electrical conduits to ensure safety and efficiency in designs of power substations. Conduits are the means in which power cables run from the ground to the electrical equipment and appliances. In addition, conduits provide protection of medium-voltage circuits in the power substation. Examples of circuits that need this protection are collector circuits entering the substation and distribution circuits leaving the substation to feed residential and commercial power needs.

L.A. City engineers originally hoped that the LED bulbs would save 40% on electric bills. By the end of 2010, with 20,000 street lights switched over, the City experienced a surprising 55% savings in electricity on the new bulbs. The city has also found that the LED lights create brighter and more uniform visibility, reducing pockets of dark shadow that conventional street lights sometimes leave.

This is the largest LED street lighting project of its type in the world. Mayor Villaraigosa commented proudly, “We’re seeing L.A. lead the way.” The project is being funded, in part, by Federal stimulus dollars as well as the Clinton Foundation. Sarah Potts of the Clinton Foundation said, “The Clinton Climate Initiative was excited to work on this project mainly because L.A. was willing to be a mover on this. They were willing to set the bar for where energy efficiency street lighting could and should go. They took on a project that was much larger than any other cities were considering.”

If you want to go greener in your home or business, you can take steps that range from quick and simple to more ambitious:

Let’s make L.A. the greenest city on the planet!

–Kim Hopkins, Owner

The Electric Connection

Click here to visit our website.