Being the owner of a plant is a big responsibility and it is very important to keep your equipment in working condition. You need to remember that all your maintenance must be planned in an efficient way for both economic and energy efficiency.

Usually when you choose to partake in your routine maintenance, it may cause a delay in your production resulting in loss of income. All safety electrical equipment that is used on a continuous basis will require a lot more maintenance than your equipment that is used rarely, although they will still need to be maintained.

Even though you may maintain your equipment on a regular basis there will be times that your equipment could break. You will then need to take all costs into consideration before deciding whether you should repair the equipment or to just replace it completely.

To help you decide, you should analyze what you have already spent on the equipment as well as what it will cost to maintain it in the future. Once you have done that you should compare it to what it would cost you to acquire newer equipment that may cost less to maintain.

You could also hire a specialist that could create a breakdown of important factors such as the probability of the following:

To run a successful plant you will also need to keep the following important steps in mind:

Although any light will help alleviate the strain on your eyes while looking at a screen, there is a right and wrong type and location for the light to have the best effect. As mentioned earlier, bias lighting is placed behind your screen to establish a brighter field of view so that your eyes aren’t constantly trying to find a balance between light and dark. Bias lighting illuminates a room without creating glare or reflections on your screen, shining directly in your eyes, or affecting how you see contrast and colors. Other sources of light, such as ceiling lights or lamps, can do all of the above.

If light is shining onto your screen, there’s going to be a noticeable difference in how the picture appears. Colors won’t be as vivid, and the screen might be hazy. In an attempt to remedy the situation, you could adjust the brightness and contrast. However, these adjustments will decrease the life span of the bulb or LEDs in your screen. The adjustments will also result in increased energy consumption along with a higher electric bill.

Adding light behind your screen instead of in front of it will eliminate any color or contrast issues. Dark scenes or colors will look richer against a white illuminated background. The picture below demonstrates how dark colors are lost against a dark background.

howtogeek.com, “. . .  you want a bulb temperature that is as close as possible (if not identical) to the reference point used in the industry that both manufactures the screens you’re looking at as well as creates content for said screens and that’s 6500K.” He goes on to say that, “The bulbs (be they CFL or LED) inside your HDTV or monitor are calibrated to 6500K, the film and digital video shot is color corrected to have a 6500K white reference point, and the editing suites where content is edited and worked on have 6500K bias light.”

So what exactly does 6500K mean? Correlated color temperature (CRI). CRI refers to how accurately a light source reveals the true colors of objects, people, and surroundings and involves a distinct testing method with comparisons to incandescent light or daylight. A light source with a CRI close to 100 shows colors very similarly to how daylight or incandescent light shows those same colors. To get the best picture, you’ll want bias lighting with a CRI as close as possible to 100.

We carry LED strip lights that are great TV backlighting options and will help you achieve the best picture on your screen.

Our variable color temperature controller and remote. The strip also has a CRI of 91, which will show screen colors accurately. This strip can be purchased in 3.28- or 16.4-foot lengths that can be cut and connected where needed with strip light connectors.

Another great option is our 6500K LED strip with LC2 connector. It has a CRI of 79 and is available in 1.64-, 3.28-, and 16.4-foot lengths. The peel-and-stick strip can be cut and connected where needed with compatible strip light connectors.

A kit in cool white is also available and is a convenient bias lighting solution. It has a 6500K color temperature, 79 CRI, and includes everything needed for installation—power supply, dimmer, remote, connectors, etc.

The strip lights listed above have peel-and-stick adhesive backings and can be cut or ordered in lengths to fit every screen size; strips are marked with designated cut lines. If you don’t order a kit, you will need a power supply and can purchase a controller with remote for dimming.

An easy installation method is to use a continuous length of strip around the back of your screen. For a cleaner look, you can cut the strips at all four corners of your screen. If you plan on cutting your LED strip lights, you will need 4 connectors (already included with the kit). All compatible installation supplies will be listed under the accessories tab on each product page. The following instructions explain how to install LED strip lights by cutting them into sections. Note that installation methods will differ depending on the strip you choose.

1. Cut your LED strip lights into lengths that fit the back of your screen. Because we offer different lengths, you might be able to order separate strips that will fit all four sides of your screen.

What is a spotlight? What is a floodlight? Knowing the difference between the two is important for properly lighting any application. Before you can understand the difference, you must know what a beam pattern is. Beam angle or pattern is a measurement of the angles that are formed between a cone of light’s brightest point (the center) and the points on both sides of the center where the light’s intensity is 50 percent as bright.

PAR30 bulb that is available with a spot or flood beam pattern.

Fixtures, such as retrofit LED can lights may also look similar to one another while functioning as either spotlights or floodlights. Some light bars are even capable of emitting flood, spot, or combination beams. There are, however, certain fixtures that we imagine when we think of floodlights and spotlights.