The number of solar panels being used in a residential setting has grown tremendously over the last several years. This renewable energy source, also known as solar photovoltaic panels, are a great way to help lower your monthly electric bills while providing you with clean, renewable energy every day. Furthermore, installing solar panels on your roof is a great way to add value to your home. With the different purchasing options, and tax credits currently available, it is easier than ever to install solar panels on your home or business.

Here are a few steps to help you get ready to install your panels:

If improperly installed, aluminum wiring can raise the risk of a house fires! From 1960’s up to the mid 1970’s aluminum wiring was sometimes used for branch circuit wiring instead of copper wiring.  During this time period copper prices were very high and aluminum wiring became a cost effect alternative to copper wiring.  Was aluminum wiring found to be as good as copper wiring?  Not even close!  Aluminum wiring quickly became a fire risk if not installed properly.  At the time aluminum wiring methods were exactly the same for copper.  Over time it was found that improper installation methods and electrical devices not designed to accept aluminum conductors could lead to fires.

If was quickly found out that aluminum wiring could cause flickering lights, hot electrical connections and even burned or melted insulation on the wiring.  There was a severe problem with overheating which can lead to fires.

1.  A Softer Metal.  Aluminum is a much softer metal when compared to copper.  During the stripping process from aluminum it can be easy to nick.  These nicks can cause hot spots in the conductor causing overheating and the potential risk of fire.  Electricians had to develop different methods of stripping the insulation off of the aluminum wiring to avoid damaging the conductor.

2.  Aluminum Expands.  When an appliance demands electricity on the circuit the conductor heats up.  While this process takes place with copper conductors too aluminum expands at a much greater rate than copper.  This expansion and contraction of the aluminum wiring  caused the the conductor to creep out from under the terminal screws on breakers and electrical devices such as plugs and switches.  This creeping of the wiring resulted in a loose connection which lead to sparking and potential fire.

3.  Corrosion or Rust.   When steel rust it becomes red, on copper rust is green, and on aluminum it is white.  When copper wiring rust it’s not as big as problem when compared to aluminum, copper rust is actually electrically conductive.  This rust on copper still allows the electricity to flow and doesn’t create as much resistance of the electricity or simplify put it doesn’t interfere as much.  However, when aluminum rust it forms a white oxide which is not a good conductor of electricity.  This creates resistance or reduces the flow of electricity.  This resistance interferes with he flow of electricity, and can cause overheating leading to fires.

There are several options for you if you have aluminum wiring in your home.  We can evaluate your homes wiring and come up with several effective methods and affordable price ranges.  It’s important to have your homes wiring thoroughly evaluated so you can know the truth about its condition so you can make the proper decision.

Solution 1.  Rewire the entire house with copper wiring.  This would be the safest long term solution for aluminum wiring.  This method would require reduced maintenance and reduced inspections needed when compared to aluminum wiring.  Rewiring the home is the safest long term solution to aluminum wiring when compared to other methods.  This solution can be expensive when compared to other solutions.  However, we have a variety of financing options and payment plans available for almost every budget.

Solution 2.  Check all connections in home and repair as needed.  Then re device the entire home with aluminum rated devices.  This short this method entails replacing all the homes plugs and switches with ones that are designed to accept aluminum conductors.  It’s important to note aluminum rated devices can be hard to find at the big box stores.  When these devices were first introduced they simply had a larger screw or terminal for the aluminum conductor to fit under.  Unfortunately, these CU/AL devices failed to work good enough and was not an effective solution.  New devices CO/ALR are created out of a similar metal which shares a similar expansion and contraction rate as aluminum which reduces the creeping of the conductor.

Solution 3.  Pigtailing.  Pigtailing simply means taking the aluminum wire connections that go to the device and splice on or pigtail on a copper conductor to go to the device such as a plug or a switch.  It is important to note that it does take a specially designed wire nut or twist-on wire connectors to to perform this method.  While this method is the cheapest it is important to make sure that routine safety checks and inspections are performed on your homes wiring to reduce the chances of future problems.

Even with all the disadvantages, aluminum wiring still has its advantages under certain applications.  It’s important to note even with these advantages you should not use aluminum wiring in your home for standard 15 or 20 amp branch circuits.

1.  It’s Light Weight.  Aluminum is lightweight in nature.  Being lightweight is an advantage when conductors are used over long distances.  This lightweight property is most beneficial for aerial applications were the aluminum wiring is suspended between poles.  This wiring method is most commonly seen in utility company applications and telecommunication lines.  Being light weight also makes the aluminum wiring easier for the installer to work with.  This makes the cable less physically demanding to install.

2.  Aluminum Wiring is Cheaper.  Aluminum wiring can be half the cost of copper wiring.  When a large amount of wiring is needed saving half the cost can be a huge benefit over copper wiring.  This method is mainly seen in feeder circuit applications in commercial buildings as well as sub panels and 220 circuits in residential applications.  It’s important to note this practice of using aluminum wiring for sub panels, services, and 220 circuits in residential applications has been deemed acceptable when properly installed and connected.

Have you ever dreamed of generating your own electricity, right in your backyard? That dream could become reality with a residential wind turbine. Wind turbines won't work for everybody, but in the right conditions, they can provide part or all of the power you need to run your home electrical work. Read on to learn more about residential wind power and decide whether home generation is right for you.

Where the Turbines Turn

Wind turbines take up more space than solar panels, and they aren't as suitable for as many properties. For starters, wind turbines work best for homeowners who have at least an acre of property. The more open space you have between buildings and trees, the better. Additionally, they are usually a better option for people who live in rural areas and don't have stringent homeowners associations or local code issues to navigate.

Small, residential wind turbines can range anywhere from 30 to 140 feet tall, with the average being around 80 feet, according to the American Wind Energy Association. Generators usually have a capacity of between 2 and 10 kilowatts, depending on how much power the home needs and what the wind conditions are in the area. Turbines aren't cheap – costs can come in between $10,000 and $70,000 – but there are federal tax credits that help soften the blow, and you can usually recoup your investment in 6 to 30 years, depending on the specifics of your system.

The Power of Wind and Solar Combined

If you want to build in a layer of redundancy in your home power generation, you can combine a wind turbine with solar energy panels on your roof so you can create power in a larger variety of weather conditions. With a powerful storage battery, you'll be well on your way to eliminating electricity bills from your life.

For wind enthusiasts who are still on the grid, you can usually sell excess power that you generate back to your utility company, similar to how the process works for solar energy, helping to drive your electricity bills even lower. A solid turbine should last for at least 20 years, and hopefully much longer, although they do require yearly inspections to keep them running in peak condition.

The U.S. Government Has Your Back

The Department of Energy publishes a consumer guide for small wind electric systems packed full of even more information. If you are interested in learning more about home wind turbines, or need other electrical work performed, call up a trusted electrician today.

Eric Lebersfeld and his dedicated Capitol Lighting team have expanded their reach and literally broadened the horizon toward “Making Lives Brighter.”  Together, they have enriched the lives of many and remain gratefully committed to their work with Habitat for Humanity.

Most recently, Habitat for Humanity Palm Beach County honored Lebersfeld at their gala celebration for his outstanding service and commitment.  Lebersfeld and the Capitol Lighting team remain faithful supporters of Habitat for Humanity and look forward to continuing the relationship and investing their resources in this noble organization.

Capitol contributions to Habitat for Humanity include:

•Donating over $100,000 in cash and products just this year.

•Investing their time and supporting the cause for almost 10 years.

•Developing the Making Lives Brighter Campaign with partner and spokesperson Rob-Van-Winkle, aka Vanilla Ice, to better serve the community and expand gift-giving capabilities.

• Bringing comfort to inhabitants, Capitol Lighting collects old lighting fixtures to be donated to Habitat and then offers donors a 10% discount towards new lighting purchases.

Members of the Capitol Lighting family enjoyed an evening of celebration and an awe-inspiring acknowledgement of their efforts on behalf of Habitat for Humanity.

For his work over the past 10 years, Habitat for Humanity Palm Beach County appointed Lebersfeld as an honoree.

Here are some excerpts from Lebersfeld’s speech at Habitat for Humanity’s Gala Celebration:

October 5, 2013

“So, how did it come to be that a little Jewish boy from New Jersey who sells lights for a living ends up being honored by a big international Christian Ministry that builds houses? “

Lebersfeld credits his parents, who taught him by their example to live his life in a certain way, to see what connects us as human beings, rather than what divides us:

“If one elevates their thinking just a little bit, we come to realize that the small differences between us are easily dwarfed by the commonalities we all share. 
The quality of a person is not made up by whom they know, what they have or how they look, but by who they are, what they create and how they can add to the lives of others.”

Lebersfeld went on to impart some of the history behind Capitol Lighting, a family-owned business that began in 1924 with his great-grandparents:

“Together, they started Capitol Lighting and began our mission to make lives brighter. 
They did this literally and figuratively. For almost 90 years, Capitol Lighting has been on a quest of making the lives of our customers, our communities, our vendors and most importantly, our employees – brighter”.

“Habitat’s stated mission is that of “building hope with homes”. Their organization is filled with dedicated and passionate people striving to provide deserving and hard working families with an incredible gift. They also have provided me personally and every member of my team who has worked on a habitat project the gift of allowing us to do a mitzvah – a good deed”.

“Our goals are aligned and Capitol’s and Habitat’s working together makes all the sense in world”.

Lebersfeld acknowledged with gratitude Capitol Lighting’s spokesperson, Rob Van Winkle, also known as Vanilla Ice, for boosting the Making Lives Brighter campaign and helping Capitol to donate well over $100,000 to Habitat.

He concluded his remarks by whole-heartedly thanking Habitat for Humanity for allowing Capitol Lighting the opportunity to support their good work: “It allows us to fulfill our mission while helping you fulfill yours”.

Lebersfeld also vowed his continued support for Habitat for Humanity, as he thanked Mike Campbell, director of Habitat, and Ana Vento of Vento Designs for making the evening such a success.