When things go wrong with the electricity in your home, it’s easy to get overwhelmed in a hurry. Do you need an immediate solution? Is the problem normal? What should I do!? All very understandable when you’re talking about something as both volatile and vital as electricity. The team at Hoffman Electrical in Tampa never wants you to be at a loss, and today we’re going to differentiate normal electrical behavior, and things that are emergencies!

The average household in Virginia pays $125 per month for electricity, according to the U.S. Energy Information Association. In Maryland, that number is $136 per month and in DC, it’s around $90. For commercial properties, the figure is even higher. But at Kolb Electric, we know that there are simple steps you can take to lower your electric bill—and we’re going to share a few key tips.

1. Check for gaps in windows and doors. Perhaps the easiest thing you can do to reduce your energy usage, and thus your electric bill, is to check your home at the beginning of each season for gaps around the windows and doors. It’s important to do this every six months or so, since your home can settle and shift slightly over time. It only takes a small gap for energy to escape.

2. Turn down your water heater. The standard setting on most electric water heaters is 140 degrees. Turning the heat down to 120 degrees can save you $60 or more each year in water heating costs. Save more by replacing your water tank with a tankless system.

3. Repair leaky ducts. If your ducts have holes in them or if they have come partially unattached, then you’re paying to cool and heat air that is never getting to your living spaces.

4. Have your HVAC and electrical systems serviced annually. Keeping all electrical systems, as well as HVAC products, well-maintained can not only extend their lifespans and help ensure your safety, but can save you money on your electric (and gas) bill too. Your system has to work harder and use more energy to push through an accumulation of dirt and debris. Regular electrical maintenance can also prevent the need for costly repairs.

5. Check your electric meter against your monthly statement. It’s a good idea to get in the habit of checking your electric usage on the meter and comparing it to your statement. This allows you to easily determine whether your monthly energy bill is accurate and provides you with the information you need to monitor your usage so you can use electricity smarter in the future. Click here to learn how to read an electric meter.

At Kolb Electric, we don’t want you to pay any more than necessary for your electric usage. For more tips on how to reduce your electric bill and/or to schedule you annual service appointment today, call us at 877 287-1179. Our licensed electricians have been helping Mid-Atlantic homeowners with their electrical needs since 1925.

We are very proud of our LED Retrofit Kits – DesignLights Consortium came out with a new standard, Version 4, that allowed the most efficient LED Retrofit Kits a higher efficiency category. So be careful, there is no need to purchase DLC Standard LED Retrofit Kits when there are DLC Premium Qualified LED Retrofit Kits available. And this is important, because the more efficient the product is, the more you save. And the savings don’t end there. The whole reason for the more efficient standard was to offer larger utility rebates at time of purchase.

So you save 2 ways: potentially at time of purchase and over the life of the product. Let’s do the math, because the numbers don’t lie.

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!