Ever noticed a slight spark when you plug in an appliance? Maybe a bittle blue zip of electricity with a hair dryer, or a hand blender. If you’re not especially technology-savvy, this phenomena may give you a little fright! After all, when it comes to electrical appliances, wiring or equipment, everyone understand that when the sparks start to fly, it can be scary. So what causes a sparking outlet? Is it normal? Is it dangerous? Answers to questions like these and much more follow!

At Kolb Electric, we understand outlets to a tee. Allow us a moment of your time to teach you about outlet sparking, it’s causes, and when it’s time to be concerned!

To understand sparking and its causes, it’s important to know a little bit about how an outlet operates. You can essentially think of an outlet as a supply line, doling out the electricity allotted to your home in measured quantities per-circuit. In the United States, our outlets run a high, fast and hot current of around 115 to 240 volts.

The important thing to know about sparking is that in actuality, it always happens when you plug in an appliance. That fast, hot current floods the plug at the moment of contact, and for a split-second the connection is being established. This forms a spark! It’s just that normally, you either don’t see it, or it doesn’t persist.

As an important note, we at Kolb would like to say that any time you feel threatened or concerned about your electricity, contact a professional or the fire department. We don’t want to see you in dire straits, and assisting you is what electricians like us are here for!

Having said that, generally speaking, sparking outlets are a cause for concern if:

To prevent issues like these from arising, keep an eye on your outlets. If they get old (even five years can be reason to have them checked), consider having them replaced or serviced. As years wear on, the connections can loosen, causing arcing and large sparks. If your outlets are located near possible sources of water, have GFCIs (Ground Fault Circuit Interrupter) installed for added safety.

At Kolb, our primary goal is always the safety and satisfaction of our consumers. You guys are important to us, and if we can help keep you safe, you can be sure we want to do all we can! Call on our master electricians today if you have any concerns regarding a sparking outlet, or if you have any other electrical concerns!

The warm weather has finally arrived and it looks like we have a good summer ahead of us. This is also the time when the electrical bills start to heat up as well. But keeping your house cool doesn’t need to cost you a fortune. Ceiling fans are an easy way to keep your thermostat up and your electrical bills down. Here are some summer maintenance tips for to get your ceiling fan moving its best.

Overtime a ceiling fan’s blades can collect dust. Once dust has accumulated on the blades, it can become airborne during use. This either spreads the dust through the air, which is not enjoyable for anyone in the room, or it can be sucked into the motor. If to much dust is drawn into the motor it can result in shaking and cause the motor to run hot. This can lead to an expensive repair bills down the road. Dust, vacuum, or use a damp rag to clean the blades every couple of weeks to prevent this build up and keep your fan clean.

Most machines with moving parts require lubrication on a regular basis. Older ceiling fans require lubrication while newer fans are self-lubricating. If you are unsure whether your fan requires lubrication, check the owner’s manual. If your fan is not properly lubricated the motor can become damaged and cause electrical fires.

When starting up your fan for the summer, there are several problems that can generate because of lack of maintenance:

Ceiling fans can be one of the most cost effect ways to keep your home cool this summer.

We’re excited to announce that we now offer Printed LED Panel Lights for custom backlit signs, trade show and exhibition displays, product advertisements and branding, mobile displays, logos, and so much more! Our user-friendly panel building tool lets you configure a panel in four easy steps. Simply choose your ideal panel size, upload or select an image, edit your image, and choose a frame. You’ll be able to see your panel as a finished product with all chosen options. Compatible accessories will be listed before you reach the checkout page.

There are many aspects of our Printed LED Panel Lights that make them unique. Check out the information below to see why they’re so special.

We offer three types of panels: wall-mount, stand-alone, and 12-volt. These LED panel lights are available in a variety of sizes and are designed specifically for their intended applications.

Stand-alone panels come with a plug and a wire enclosure box. They can be used almost anywhere for any purpose from backlit signs for product showcasing and branding to window signage and custom logo displays on desks and shelves. These panels are available in 2′ x 2′, 2′ x 4′, and 1′ x 4′ sizes.

When you bought your home, one of the things you probably didn’t even look at was the electric panel. If the lights work and the appliances in the home work, there doesn’t really seem to be any point in looking at the panel. Plus, how would you know what you were looking at? If you have recently purchased your home or live in a home that is older than 20 years, you may want to take a peek at your electric panel to determine what brand you have. There are a few brands you do not want in your home because they have been proven to be hazardous. An electrician in Glendale can inspect the panel for you to tell you what you are dealing with and your options. The team at The Electric Connection has a trained staff of electricians that will tell you everything you need to know.

Pushmatic or Bulldog

These systems are older and replacement parts are no longer being produced. This is a problem in itself. Another issue is the panels require regular maintenance. If they are not regularly maintained, the breakers become difficult to use.

Zinsco

This was a popular brand several decades ago, but it has since been discovered the breakers in the panels were just not enough to handle today’s high electric demands. A Glendale electrician can take a look and see if this is what you have. The breakers do not regulate the electricity flowing and can result in burnt wires, which is a fire hazard.

Federal Pacific

This was a brand that was very popular in the 1950s and was used throughout the 1990s. The breakers do not trip when they are supposed to, which is a serious fire hazard.

If you see one of these names on your electric panel, call your electrician. Glendale homeowners may have nothing to worry about, but it is always best to explore your options and know just what it is you are dealing with. Call The Electric Connection today and schedule your electric panel inspection.