If your home has a fuse box, it means it has older wiring. This is not automatically a bad thing—the wiring put in was up to code at the time of installation—nor does it mean your home is unsafe. If the fuse box malfunctions, you can choose to have it repaired instead of replaced with an upgrade to a circuit breaker panel.

A fuse box and wiring can wear down over time like anything else in a home. If your house is old enough to have a fuse box, chances are strong that it and the wiring are starting to deteriorate and will begin to malfunction more and more often. You can expect to require a larger number of repairs, and in the long run it isn’t worth it to keep patching up a fuse box and aging circuitry.

An old fuse box will also have trouble keeping pace with growing household energy demands. When the fuse box was first put it, there were lower voltage demands on the circuits in most houses than there are today. Your home likely uses more power than it did only 10 years ago, and the fuse box may not be enough to handle this higher power load.

Finally, fuse boxes are simply less convenient than circuit breaker panels. Instead of replacing fuses when they get blown, you only have to reset the tripped breaker.

Replacing a fuse box with a circuit breaker panel does more than simply tear out one component and put in a new one. The wiring around the panel will probably also need to be replaced with upgraded wiring so that it matches the capacity of the new installation.

Keep that old wiring in mind as well. This might be a good time to schedule a whole-house re-wiring to go along with the circuit breaker. This will bring your home up to current electrical code requirements, offer more efficient power, and lessen issues from outages.

We strongly urge homeowners who still have fuse boxes to make the change to the modern electrical panel.

Fans in the attic? The idea at first may sound odd. We usually think of fans as blowing somewhere in our home where we can feel their effects, like hanging from ceilings or mounted in windows. Few people spend more time in their attic than they absolutely must, so it seems useless to install fans there.

However, attic fans can form an important part of maintaining the overall efficiency of your air conditioning system. If you’ve taken all the steps you can to keep your HVAC system working its best (regular maintenance, duct cleaning, changing the filter, proper insulation), attic fans will take you a step beyond. We’ll explain why putting in attic fans will benefit you.

Attics are both heat traps and heat escape routes. You can use insulation to stop heat from escaping in winter, but what about summer, when heat gathers in the attic and creates excessively high temperatures that will seep into other parts of your home? (Go up into your attic on a hot day and see what it’s like. It can be miserable. You don’t want any of that to get to rooms you actually use.) To stop summer attic heat, you’ll need attic fans.

Attic fans should be wired to a thermostat that will turn the fan on based on the temperature. This saves energy since you won’t have to keep the fan on constantly or continually check on it. The movement of air in the attic will lower the high temperature.

The first benefit is the most obvious: your home will not get as hot during the summer. On average, the temperature in the attic will decrease 50 degrees with a fan, which means a drop of 10 degrees in your house.

This not only translates into comfort, it also means savings on your energy bills. A cooler house requires less work from an air conditioner to cool it. You’ll spend less, and your air conditioner will not receive extra stress that will lead to repairs and possibly an early replacement.

Attic fans will also extend the life of your roof. Rising moisture in your home will get into the roof, eventually creating mold in the insulation and the roof material. In winter, the freezing moisture can be extremely damaging. Attic fans move moisture away and keep it from settling.

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.