The hot water heater represents one of the greatest hazards in the modern home, yet far too many homeowners have never read their heater’s owner’s manual. Common dangers associated with these household appliances include severe burns from scalding water, electric shock hazards, explosions, and fire.

Because most water heaters reside in closets, basements and garages, and are for the most part hidden from our daily lives, many aren’t as aware as they should be of the maintenance and precautions which are necessary for safety. Many homeowners don’t know, for instance, that they should drain and flush a hot water heater every six months, to prevent sediment buildup. Others are unaware that hydrogen gas can build up inside electrically heated hot water systems when they remain inactive for two weeks or more. Hydrogen buildup requires carefully performed procedures to safely remove this flammable gas from hot water pipes. Many don’t know how and why water softening systems shorten the lives of water heaters, or that every electric hot water heater should be properly grounded with the correct gauge of copper wire.

Correct safety and maintenance measures covered in a water heater’s manual are extremely important for household safety, so every homeowner should study this to learn how to properly maintain their hot water systems. It’s also extremely important to understand the electrical dangers these appliances represent. Because a hot water heater contains electrical heating elements immersed in water, these elements can deteriorate with age and short out electrically to the water heater’s metal casing. When this happens, it’s possible to receive a severe and perhaps fatal shock when touching the hot water heater’s housing or connecting pipes. If you do not have the necessary skills to work safely around high voltage electrical conditions, you should always call a professional electrician any time you suspect a problem with your hot water heater or when you have any other electrical concerns.

When any questions about electrical safety arise, please call Bryant Electric Service at 512-402-8587. Our electricians are trained and equipped to identify any type of hazardous electrical condition, and to determine the proper repair procedures.

Here’s a familiar household scenario. You put a can of catfood into the electric can opener hoping to see the can spin around and make whirring noises, but instead nothing happens. No spinning, no noise. What to do?

Is the can opener broken or is it just not getting electricity? Finding this out is the first step of troubleshooting the problem.

Step 1: Plug the can opener into a socket that is delivering power to an appliance or lamp that works. Let’s say the can now spins and whirs. You know the can opener is fine. After you’ve fed Kitty, you can turn to the electrical issue to see if it’s something that you can handle or if you need to call an electrician.

Step 2: Look at the kitchen outlet that you originally plugged into. Does it have two little buttons on it that say “Test” and “Re-set”? If so, it’s a safety outlet (GFI) for kitchens and other places where water might be nearby. Push the re-set button and see if the can opener works now. If so, the problem may be solved.

However, if you frequently have to push re-set to get this outlet to work, there’s an electrical problem that an electrician should handle. If re-set doesn’t fix it, go on to Step 3.

Step 3: Is the outlet controlled by a wall switch? If so, flip the wall switch. Does the can opener work now? If not, go on to Step 4.

Step 4: Has the circuit breaker that controls the outlet flipped off? As a first step, turn off any computers and other electronic devices that might lose data if they lose power suddenly. Next, look in the circuit breaker box for any flipped switches. Even if you don’t see one, it’s possible that one has flipped off internally without moving to the off position. Firmly flip off each circuit breaker in turn and flip it on again. Now, plug the can opener into the kitchen outlet and see if it works. If the can opener works, you’re done.

But as a note, if a particular circuit breaker repeatedly flips off, your electrical system may need to be enlarged to meet your power needs or there may be an intermittent short circuit. An electrician can tell you which it is. A short circuit is a fire hazard and should be addressed as soon as possible.

Step 5: If after these steps, the kitchen outlet still doesn’t work, it’s time to call an electrician.

If you follow these steps whenever an electric outlet or wall switch is giving you trouble, you can save on unnecessary electrical service calls.  But if it turns out that you need an electrician and you’re in L.A., give us a call at (800) 990-9490.  We’ll be happy to discuss any electrical issues with you.

Kim Hopkins

CEO, The Electric Connection

Click here to visit our website.

There are times when you plug in the toaster or try and run the vacuum cleaner and it won’t work right. You probably unplug it and try it again and it works fine. You think nothing of it and assume it was a fluke—until it happens again with another appliance with the same outlet. Now, you have to wonder, is it an electrical problem or is it really just a fluke? These situations may appear to be no big deal on the surface, but they really are and can indicate there is something going on behind the outlet cover. Something like frayed or loose wires that could create a spark and start a fire that burns slowly and becomes a serious problem before you know it. You need an electrician in Beverly Hills to investigate these little problems before they become big ones that threaten your home and your safety. The team at The Electric Connection is here to help.

Outlets that work intermittently are just one of the symptoms of a serious electrical problem. Lights that flicker or do not turn on even when a new bulb is installed are another sign of electrical trouble. The light fixture may have wiring that has deteriorated or the wiring in the ceiling could be bad. Because you can’t tell simply be looking at the light or the light switch, you need to call an electrician familiar with Beverly Hills electrical needs.

The electrician will do an inspection and thoroughly investigate the problem. If it is a wiring issue to a single outlet or light fixture, it is a fairly easy fix. If you have a breaker that trips frequently, let an electrician know. This is another sign of a problem. Never leave little electrical problems unchecked. They can quickly become serious concerns. Give The Electric Connection a call today and schedule your electric inspection.