Today’s infographic breaks down the essential facts about energy efficiency. It explains why energy efficiency is so important, and goes into detail about how wasting energy can harm the environment. Then, after convincing you that conserving power is a good idea, it offers a comprehensive guide to help you start saving more energy at home, assessing the efficacy of your appliances, insulation, and of course, your lighting.

I especially like this infographic for the Incandescent/CFL/LED comparison chart at the very bottom. Good stuff!

Anyone who has undergone a home inspection on an older home has likely heard the term “GFCI” in regard to outlets. For many people this is a “huh?” or a “smile and nod” type of moment. If you did rudimentary online research and still don’t really understand what the heck GFCI is, why it’s important, or why you should care, then read on for an understandable explanation, courtesy of our residential electricians.

Ground-fault circuit interrupter (GFCI) outlets may sound foreign, but they are actually very recognizable; have you ever noticed a couple of buttons on a power outlet? That is a clear sign of a GFCI outlet, and those buttons are made to test the integral function that differentiates this type of outlet from the standard version. Basically, GFCI outlets can very quickly perceive when power that was put out is not going to the correct place and can very quickly trip the breaker to shut off the outlet, potentially preventing injury, fire, etc.

These protective outlets can go pretty much anywhere, and they used to not be required to go in any particular places. Now, they are typically required in bathrooms, kitchen counter areas, in and around swimming pools, on external outlets, and many more specific residential areas. Basically, GFCI outlets are required anywhere that appliances used can come in contact with water (ie, kitchen counter, bathroom, in the event of snowfall piling against an external outlet, etc). These outlets are becoming more and more standard throughout the home and could potentially become necessary for all outlets in new construction in the near future.

If your home was requested or required to comply with GFCI outlets, or if you are concerned that your family or home is at risk, please give us a call. As Des Moines’ Top Rated Local® residential electricians, we would be happy to help make your home a safer place.

Air flow is obviously a very big part of forced air systems. Without air flow, the entire system doesn’t work. It’s just producing heat and not sending it anywhere. It is precisely that issue that can cause a great deal of damage to your heating system. There are a couple of different ways that your heating system can be prevented from circulating air, but we’re going to focus on one: the air filter. Let’s take a look at what the air filter does, and how it can create air flow issues that lead to call FB Electrical Services. We provide heating repair throughout Boston.

Are you having problems with some of the outlets in your home? While actually trying to repair an electrical outlet on your own can be dangerous, you can at least diagnose many of the most common electrical outlet problems. Before you call Kolb Electric, see if you can pinpoint the problem by trying the following steps.

If you were trying to plug something into the outlet and it wasn’t working, try plugging it in somewhere else. If it works, it’s likely a problem with the outlet. If it still doesn’t work, the problem is with the device itself.

Look for any wall switches and turn them on. If the appliance works after flipping the switch, you shouldn’t have any further problems.

Check other outlets near the dead one. If any more don’t work, mark them with tape.

Unplug everything from nearby outlets to eliminate the possibility of a short or overload.

Make sure the circuit breaker isn’t tripped. The circuit breaker will be located in the breaker box, usually in the garage, basement, or kitchen. To see if it is tripped, open the box and see if any of the breakers are in the RESET or OFF position. If they are, turn the appliance off, switch the breaker back into the ON position, then try to device again.

Check for blown fuses. To do this, turn off the main switch and use a flashlight to see if any of the fuses are burnt or blackened.

If the dead outlet is a GFCI (Ground Fault Circuit Interrupter), try to find out if there’s any reason it may be tripping. GFCIs shut off power to outlets when they detect a leak in electrical current, so if they continue to trip after being reset, there could be a dangerous current leak that requires an electrician’s attention.

If you have dead outlets in your home, or if you need electrical troubleshooting in Maryland, Virginia, or Washington, DC, call Kolb Electric today!