We’ve recently added a new explosion-proof light for use in granaries, paint booths, mills, mines, oil refineries, auto shops, marine vessels, shipyards, and other hazardous locations.

This LED light is listed as UL1598 for wet locations and UL1598A for outdoor marine applications. It is classified as UL844 and meets National Electric Code—NFPA 70, article 500—requirements in the U.S. for Class 1 Division 1 (groups C and D), Class 1 Division 2 (groups A, B, C, and D), and Class 2 Division 2 (groups F and G) hazardous locations. The light fixture meets IECEx Zone 1, 2, 21, and 22 requirements for safe operation around combustible gas and dust.

Designed to replace 320-watt metal-halide (MH) fixtures with comparable output—the 100-watt LED explosion-proof light emits 13,000 lumens of natural white illumination. This weatherproof LED fixture operates within a 100-277V AC range and is built to last five times longer than MH lights.

The durably constructed light has a vibration-resistant anodized aluminum housing that prevents the release of sparks from internal components. The die cast housing is also powder coated for corrosion resistance and has a removable back plate for access to the constant-current driver, which is sealed with a silicone gasket. LEDs are protected by a tempered glass lens.

A conduit is required for installation, and the fixture has two openings for input and output connections. The LED explosion-proof light can be pole mounted or mounted to a wall, floor, or ceiling with its included bracket. A five-year warranty protects against any manufacturer defects or malfunctions.

There are some home repairs you don’t want to tackle. Here are several red flags to look for when you’re buying a home.

common plumbing problems. Water damage is the homeowner’s mortal enemy. Water causes foundation problems, rot and mold. Want to move into that mess? Probably not.

To see if your potential purchase has suffered the consequences of water damage, start outside and

When you see water damage near an electrical outlet or a light fixture, you may have stumbled onto a fire risk. But outlets aren’t the only place to look for potential electrical problems.

Look for flickering and blinking, which signals a poor connection somewhere along the circuit. Check to see if both halves of electrical outlets are functioning. Make sure bathrooms, kitchens, garages and outdoors have professional electrician should determine whether the home’s circuits or fuses provide adequate power and service. The electrician can look for burned wiring, improper connections, dead-end wiring or ungrounded switches and outlets.

Your home inspector is a font of knowledge! Have the inspector check the air quality of the home to see if any mold spores are present — if water leakage or other common plumbing problems have been an issue, mold may be, too.

The inspector can ensure that the heating and cooling systems are properly installed. The inspector can also determine how old the HVAC system is and ensure that its been maintained

Your inspector will also determine the type of pipe that supplies water to the house—old lead and galvanized steel pipes are going to need replacing.

If the house you’re considering fails these tests, it may be best to move onto the next. If you still think it’s the right house for you, despite the presence of common plumbing problems or the need for an electrical overhaul, negotiate a lower price or ask the seller to pay for needed fixes.

Questions? Thoughts? Leave a note in the Comments section orschedule service today.

Dark spaces can be trouble for many different reasons. If you are trying to navigate a dark space, like your back yard or the outer areas of your landscaping, you risk suffering an injury because you can’t see. Dark spaces also tend to invite unwanted critters. Animals big and small will appreciate the darkness so they can skulk around without being detected. You also have to worry about people who may vandalize or burglarize your home, outdoor furniture and décor or even your cars under the cloak of darkness. It is a good idea to invest in landscape lighting that completely lights up the entire area. An electrician in Pasadena can make that happen for you. The team at The Electric Connection knows how important it is to keep your home secure and can get you set up with the right lighting.

When you have a Pasadena electrician install landscape lighting, you are not limited by an extension cord. You also don’t have to worry about whether or not a solar light is going to get enough sunlight in particularly shaded areas of the landscaping. With the proper lighting scheme, you can light up every corner of the yard, including under bushy shrubs and full shade trees. You don’t have to leave any area in the dark.

In fact, you can create a lighting scheme that enhances the property and doesn’t give it that sterile look. Add soft lighting or pretty colors to act as an effective security measure, while making the landscaping look gorgeous, even in the dead of night. This kind of job needs to be handled by an electrician. Pasadena residents will love the freedom of putting lights anywhere and the ability to control when they come off and on. Give The Electric Connection a call today and get your landscape lighting installed.

It is estimated that each year around 3,500 Americans die in home fires and 20,000 are injured. A leading type of home fires is the electrical fire. This is especially true in regards to manufactured homes. When it comes to breaker panel fires, there are currently two different brands of panels that have known manufacturing flaws that puts anyone with one of these panels at risk for an electrical fire. Zinsco panels and Federal Pacific Electric panels are known for the dangers that they pose. In addition to these two brands, there are also many people who have panels older than 40 years old that may not provide the protection that is needed to protect their homes properly from electrical dangers. If your home has one of these panels, you should get in touch with an electrician in Pasadena right away to ensure that the proper steps are taken to safeguard you and your family.

Federal Pacific Electric Company (FPE) Panels

The FPE was one of the largest circuit breaker panel manufacturers in North American from the 1950s to the 1980s. As time went on, many electricians discovered the dangers that these panels posed to the families that they were supposed to protect. It is now known that FPE panels may appear to work for many years, but can overheat and become a fire hazard after only one short circuit or overcurrent.

If you have a breaker that fails to trip whenever it is supposed, it can allow an incredible amount of electricity to enter your home from your electrical utility company. Whenever this happens, it can lead to severe overheating and electrical fires. As a result, many panels such as these older FPE panels can eventually catch on fire, leading to a very serious issue for any homeowner.

Zinsco Panels

Zinsco panels were also very common at one point in time. Although there are not many of them remaining, they can be very dangerous in the modern setting. These panels are simply not designed to handle the amount of electricity that we use every day.

For more information on electrical panels, (Click Here), or to schedule an electrical panel upgrade, call our team at The Electric Connection today.