By Clarissa Allison | January 13th, 2017

Homeowners have always wanted to bring another time to life. Many of us want our homes to feel like a peaceful getaway echoing a country retreat, or to act as a transport to a different (note: picturesque) period of time. Unlike many design trends, the New Farmhouse style marries both of these desires and blends them smoothly. New Farmhouse doesn’t boast the same masculinity as straightforward Neo-Industrial nor is it a predictably dated Shabby Chic look, although some elements can cross-over. Finding the right items to achieve this scheme can be confusing, so we’ve compiled a few recommendations for the ideal lighting fixtures to complement your new design project.

The Kitchen

If you have an electric car, you may have been excited with the idea of saving money on gas while doing something great for the environment. Unfortunately, your car may not be meeting your expectations. What many people don’t know about electric cars is the fact they can only go about 60 miles or so before they need recharged. If the car is out of juice, it will have to rely on gas and still cost you money. An electrician in Santa Monica, like those at The Electric Connection, can help you make your electric car work for you.

The electric cars are often sold with a standard, slow charger that runs on 120-volts. It can take about 24 hours for a car to be fully charged. It isn’t often you can sit at home for a full 24 hours to allow your car to become fully charged. Because of this, your electric car is not saving you as much money on your gas bill that it could be. You can opt to have a fast electric car charger, technically referred to as a Level II charger. You will need a Santa Monica electrician to install the proper outlet for the charger. This faster charger will charge your electric car in about 6 to 8 hours.

The Level II charger will require a 240-volt outlet to be plugged into. This isn’t a standard fixture in a garage. In fact, most homes only have one or two of these outlets and they are dedicated to the dryer and air conditioner. You invested in an electric car in order to decrease your dependency on gas. Make it work for you with the help of an electrician. Give The Electric Connection a call today and schedule your appointment to have a 240-volt outlet installed.

A burnout, in electrical terms, is a drop in voltage across an electricity supply system. It can be spontaneous (unintentional) caused by disturbances in the grid, or intentionally caused during emergencies when the load needs to be reduced in order to prevent blackouts. The lower voltage causes lights to dim, leading to the name “burn out”.

Spontaneous burnouts usually cause voltage to drop for only a short period, while the intentional ones can have effects lasting anywhere from a few minutes to a few hours.

A burnout can prevent some electrical devices from getting harmed by power loads, but others can actually get damaged severely. Here are some facts that you should be aware of:

GFCIs or ground fault circuit interrupters are safety devices that have been extremely effective in reducing the total number of home electrocutions by almost 50%, in Australia. Most new homes and businesses now have these devices installed in locations where water is present in and around the premises. It’s important that electrical installations in outdoor locations be protected from wind and rain; that’s the one way to prevent shock hazards.

Before we understand what a GFCI is, let’s understand what a ground fault is. It is the unintentional flow of electrical current between the source and any grounded surface. If the electrical installation isn’t properly protected, an individual that comes into contact with an energised part can suffer an electrical shock.

For instance, if the person is holding any deteriorated electrical cord attached to the hair dryer, and it happens to touch a plumbing fixture they are using, they can get electrocuted and will suffer a painful shock.

This small receptacle has “test” & “retest” buttons on it. It may sometimes be built into circuit breakers that are installed in the main electrical panels. When electricians are conducting an electrical audit, they also test whether the GFCIs are functioning properly. They might also recommend that you get GFCIs installed in the vicinity of plumbing fixtures.

These are extremely useful electrical safety devices which trip the electrical circuits in case they detect any leakage current or ground fault. An individual that’s become the pathway for a leaked current can get a severe shock or will get electrocuted. It is important to get GFCIs installed in any outdoor or indoor areas where you feel that water might come in contact with the electrical installations or fixtures you have on your property.

Ideally, the areas where GFCIs should be installed include:

It is important that these devices be checked with regularity. If you have opted for an electrical maintenance contract, the electricians will ensure that the GFCIs are checked along with all the other installations; this will help confirm they are working as they should and that they provide the necessary safety to those living or working on your premises. You can also test the GFCIs on your property, by following these basic steps:

If you aren’t too sure about whether you have GFCIs installed at the right points on your property, call in your local electrician. They will inspect all the fixtures and inform you if GFCIs have to be installed in any specific rooms or outdoor spaces. Aside from this, they will also audit the rest of the installations and tell you if any upgrades are required.