The new school year is in full-swing, which means your schedule is about to be totally packed with all sorts of activities. Between the numerous football and volleyball games, fine arts events, and various other school-related events ahead this fall, your time at home will be both precious and a rarity. Depending on how often you’re out cheering your favorite student on, your home could become the perfect spot for a burglar.

Last week, we gave you some really important tips on protecting your home from an invasion when you’re away on vacation. This week, we’re going a step further to help you protect your home while you’re still in town, but maybe just out and about until the late hours of the night. Even if you’re not concerned about a break-in, perhaps you just want peace of mind your babysitters, housekeepers, repairmen are doing their job. You can even check to see if your kids are doing their homework or chores.

Smart security cameras are an excellent way to safeguard your home and family when you’re away, even if it’s just a few miles down the road. Equipped with WiFi capabilities, you have the ability to peek in on what’s happening using the app paired with your system.

The frequency of accidents caused by the incorrect usage of electricity has increased as our dependency on electronic devices has increased over the last several years. Every year, accidental electrical fires cause millions of dollars in property damages. Because of this, you should always practice as much electrical safety as possible whenever you use your electrical appliances and devices. To make sure that your home is as safe as it can be from electrical accidents, you should also consider talking to an electrician in Glendale about performing an electrical safety assessment, updating service panels and ensuring that your home is properly grounded.

Can you use any size fuse or circuit breaker in your electrical panel?

Many older homes still utilize an outdated fuse box inside the service panel, instead of a safer and more modern breaker panel. If you still have a fuse box, then it is very likely that your electrical system is not prepared to take the amount of electricity that you use every day. This results in fuses blowing very frequently for many homeowners. Rather than replacing blown fuses with the appropriately sized replacements, some homeowners choose to oversize the fuse in order to reduce the frequency of blown fuses. This can be very dangerous, though not nearly as dangerous as replacing the fuse with something that cannot blow, such as a coin. Doing either of these should be avoided. Fuses are protective devices that are designed to stop electricity from flowing into a circuit whenever it reaches a level that is dangerous. Whenever you oversize or bypass a fuse, your circuit can overload. This can lead to overheating, fire and electrical shock.

One of the best ways to deal with an older fuse box is to have your electrical service upgraded by one of the technicians at The Electric Connection. We can send someone out to upgrade your service, and install the appropriately sized circuit breakers in your new electrical service panel. If you are experiencing any issues with your electrical panel, please don’t hesitate to give us a call today.

Click here to visit our website.

Summer is in full swing which means you’re likely spending more time in a hot tub. If you don’t currently own a hot tub but are considering getting one in the near future, there are some important things to consider before purchasing. It’s a no brainer that water and electricity don’t mix; therefore, adhering to proper safety and electrical protocol with hot tub installation and maintenance is imperative. Listed below are Expert Electric’s 5 tips for hot tub safety:

You might consider yourself to be quite the handyman; however, setting up a brand new hot tub is an entirely different animal. Wiring a hot tub is no easy task and it’s far more complex than setting up your average home appliance. Consulting a licensed electrician for a hot tub installation will often save you time, money, and a trip to the hospital. A licensed electrician will minimize any costly mistakes you would make that could result in permanent damage to the hot tub and a void in the hot tub manufacturer’s warranty. Additionally, they will ensure you’re getting the best value in all of the necessary accessories that need to be purchased for installation.

Although this usually isn’t a problem if your home was built within the past 30-40 years, it’s always a good thing to look into before adding an additional appliance to your home. This is another area that a licensed electrician can help with. It’s also crucial to understand what type of voltage your hot tub is running with. Smaller hot tubs usually require 120 volts whereas larger hot tubs will often run on 240 volts. Understanding the different requirements associated with your specific hot tub’s voltage and how it relays to its power source is key.

When it comes to hot tub installation, it’s all in the wiring. Using the proper wiring is critical to the functioning and safety of your hot tub. It’s important to use wiring that is able to handle the heat. A licensed electrician will be able to answer any questions you have about wiring and determine which type of wiring is necessary for your hot tub.

Did you know that Canada has a set of electrical codes that must be followed when installing and maintaining any type of electrical equipment in Canada? These codes must be followed accordingly during the installation. The Canadian Electric Code is a handbook that can be purchased online; however, it’s a long read and fairly expensive. Hiring a licensed electrician will save you the chore of reading it and void its additional cost.

Before installing a hot tub, it’s imperative to consider its location. You’ll need room for the hot tub as well as extra room to get in and out. The hot tub should be at least 10 feet away from any overhead power lines and 5 feet away from the removed spa panel. It’s also important to consider how the tub will connect to its power source.

For further information on hot tub installation and the necessary electrical requirements, please visit our contact page for a local number near you or to fill out one of our online forms. Our team of licensed electricians are here to help ensure your hot tub gets installed safely and efficiently.

Do you know why your home in Manassas would benefit from whole home surge protection?

You might think it has something to do with lightening. However, the reasons for whole home surge protection are more complicated than you may realize.

In addition to not experiencing a significant number of them in Manassas, did you know that whole home surge protectors can’t stop lightening strikes from damaging your electronics?

At this point, your probably starting to seriously doubt the importance, use or need for whole home surge protection. However, nothing besides a lightening rod and hope can keep your home safe from a lightening strike.

Another point to keep in mind is that whole home surge protection’s primarily function isn’t to protect your electronics and appliances from outside surges. It’s actually intended to protect your electronics and appliances from each other.

When we think of power surges we typically envision lightning strikes and electricity bursts from outside power lines. In reality the majority of surges are short intense shocks created by large appliances such as generators and HVAC motors. These smaller surges typically go undetected and usually don’t blow out the entire circuit.

However, over time, they add up. If you banged your knee in the same spot every day for a year, you might not have any significant damage on the first day, but on day 365 you’d probably have quite the bruise. The same logic applies to your electronics. Those little zaps might not degrade their performance immediately, but the problems are cumulative. Why shorten their expected usefulness and replace your appliances sooner than you have to?

Perhaps you've always wondered what's in the mysterious metal box on the basement wall. It's a circuit breaker box, and without it your whole home electric system would be unsafe, leaving you in danger.

Circuit box repairs or upgrades require an expert, but you don't need to be a master electrician to understand the basics of how it functions. The most common problem is a tripped circuit, and you can usually reset it yourself.

What's in the Box?

The circuit box is frequently found in the basement, although it could also be in a garage, closet, utility room or even outside. All the electricity coming into your house flows through the box.

If you open the metal door, you see a bank of switches. Each one corresponds roughly to a room in the house, while certain outlets for major appliances like the washer or furnace probably have their own switch. They should be labeled.

There also may be a main disconnect breaker, usually at the top of the box, which allows you to cut off power to the entire house. In many newer homes the main disconnect may be outside near the electric meter. Some homes do not even have one. This is useful if you are doing electrical work in your house, or in the circuit box itself. The switch should be labeled “main” or something similar.

How It Works

Why do you need a circuit box? When an electrical device malfunctions, such as the motor in your freezer overheating, wires can get crossed, creating a huge spike in electric charge. That puts you at risk of overloading your electrical system, and unchecked overloads can cause lead excess heat stress on wires, or worse.

Fortunately, your circuit breakers are on the job. There is an electromagnet or bimetallic strip inside each breaker. If the current moving through the circuit gets too high the device flips a switch, disconnecting the circuit. No more electricity can flow to the part of your home where the problem is, so the danger is averted.

So if the power goes off in one part of your house but still works in the rest, a tripped circuit breaker is the most likely culprit. The switches in your electrical panel should be labeled; if not you can still tell which one got tripped, because it will be flipped part way toward the off position. Some switches also show red when they've been tripped.

How Do I Fix It?

All you have to do to restore power is flip the switch all the way to the off position, then back to on. If flipping the circuit back on doesn't solve the problem, it might be something more serious. In that case, it's time to call a licensed electrician.

Some newer circuit breakers have advanced features, such as the ability to detect when a person makes contact with a live wire and automatically cut off the current, potentially preventing injury or death by electrocution.

If you live in an older home you may still have a fuse box. It operates on the same principle as a circuit box, with one major difference -- the wire inside the fuse actually burns up if too much current passes through it, so if the fuse blows, you need to replace it. Most fuse-style panel are maxed out, so if you have one it would be a good idea to consult your electrician and see if it’s time to consider a replacement.

Need Some Professional Guidance?

Your local Mister Sparky® electricians are always here to help. If you're having problems with your circuit breakers or fuse box, give us a call.