Whether you have a scheduled lighting project or an emergency on your hands, there are plenty of situations when it’s appropriate to call in a local electrician for the job.

Repairing a Wire Damaged from Drilling a Hole in the WallWhether you’re hanging pictures, shelves or a TV mounting bracket—or any other reason you might be drilling into a wall—there’s always the possibility that you’ll hit and damage a wire. This is definitely a fix you want to leave in the capable hands of a certified electrician.

To prevent the problem from happening again, use a stud finder and aim for the center of the stud. Before drilling, use a small tipped screw driver to verify you are hitting the stud and not the side. Once you have verified, feel free to drill away.

At this time of the year, the weather in most parts of Australia is perfect to spend time in the outdoor spaces of your home. You can spend leisurely hours lounging around by the pool, or have BBQ parties in your outdoor kitchen, on the patio or deck. In short, you can make good use of these areas in the daytime as well as after dark.

This also means you will end up using some or the other electrical equipment and appliances there and this brings with it a specific set of challenges. In some cases, the falling dry leaves can also prove to be an electrical hazard in the outdoor areas of your home. The best way to avoid problems is to follow these basic outdoor electrical safety tips:

Just as you get the indoor electrical equipment and installations audited regularly, you should also hire an electrician to conduct a semi-annual audit of your garden and yard’s outdoor electrical fixtures. It’s best to get these checks done some time between Winter & Spring.

The next audit should be conducted between Summer & Fall. This helps reduce the chances of electrical problems surfacing out of the blue due and to temperature and weather fluctuations. While it’s best to call in a licensed and experienced electrician to handle the job, it’s also a good idea to keep an eye out for signs of electrical problems including:

When the electrical audit is being conducted, ensure that all your outdoor electrical equipment is stored & functioning properly.

Damaged or loose electrical wiring can prove to be a major electrical hazard and can be the cause of an electrical fire in your home; this is especially true if the wiring comes in contact with dry leaves or firewood that’s been piled up in the yard. Once the electrician gives you a complete report of the condition of the wiring, you should also make it a point to replace any wiring that’s loose or damaged.

Any water pooling in the landscaped areas of your home can prove to be an electrical hazard and can put your home and other outdoor features on your property at risk. The best way to prevent this from happening is to ensure that all the electrical switches, cords and connections are stored away and that they are in weather-proof casing; this ensures they don’t come in contact with any water sources.

Every pool and spa tub installation has some electrical wiring and fixtures such as pumps, underwater lights and power points etc. Ensure your electrician checks all these fixtures and that the electrical safety requirements have been met.

It’s a good idea to opt for a preventive electrical maintenance contract. As part of this contract, your electrician will check all the electrical installations in your yard and garden spaces. These checks help ensure that all these systems are in a good condition and that if any potential problems are noticed, they can be nipped in the bud.

I’ve saved hundreds of dollars on electricity in the last couple of years. During the summer in Los Angeles, the biggest dollar gobbler on our household electric bill is air conditioning. My wife and I need a cool bedroom at night or we don’t sleep well — 75 ̊or lower. I learned a trick with a bedroom ceiling fan that really saves on electricity.

Ordinarily, a ceiling fan lowers the temperature a couple of degrees. When it’s 82 ̊at bedtime, that helps a little, but we still have to run the A/C. In earlier summers, we just turned on the air conditioning and set the thermostat for 75 ̊. All night long, the compressor on the roof turned on and off, and was on about half the time. It’s a 4-ton air conditioner, so every hour it costs us 50₵ ( If it’s on for 4 hours, that’s $2 a night or $60 a month. That’s just for nights, let alone hot summer days.

Some homes have even larger air conditioners. Depending on the size of yours, air conditioning will run you 18-67₵ per hour for electricity. That’s $22-$80 a month if it’s on four hours a night.

I got wise the last two summers. In L.A., most nights, the temperature drops below 75 ̊. If we’re not using the A/C upstairs where the bedroom is, as soon as it’s cooler outside than in, I open a few windows. I don’t run the A/C at the same time that the windows are open for obvious reasons. I don’t want to make it hard on myself, so I open only four upstairs windows that slide easily. One is a tiny window in the bedroom. I also open doors so that air can circulate from the open windows into the bedroom. Then, I turn on the ceiling fan in our bedroom, just enough to get the air moving throughout the upstairs. That draws in cooler air through from outside. I leave the windows open and the ceiling fan on low the rest of the night.

I still set the thermostat on the air conditioning to 75 ̊ and sometimes when I first go to bed, it comes on. But usually only briefly. This ensures that the bedroom is down to 75 ̊or lower all night long.

Except during bad heat waves, the temperature is usually down to about 70 ̊ in the upstairs by 7 a.m. Then, first thing in the morning, I close all the windows and turn off the A/C. Closing the windows keeps the house cool into late afternoon. So, we’re actually saving on electricity during the day, too. (It helps a lot that we have a huge ash tree shading our roof.)

You might wonder how much running a ceiling fan is going to cost for maybe 10 hours each night? One thin dime. It’s 1₵ an hour — probably even less as I run the fan at the lowest speed. If I used an electric fan in my home office during the day instead of the A/C, that would run 2₵ an hour. Or if I wanted to splurge and use a whole house fan, that would run 4₵ an hour. Compare that with 18-67₵ for air conditioning.

My strategy will work for you if you live in a part of the country where it cools down at night during the summer. You should have screens on the windows to keep out mosquitos and other bugs. If worse comes to worse, you can buy screens that you can put in place each night between the jamb and the sill. Your hardware store should carry something like that.

Of course, you’ll also need a ceiling fan in your bedroom. We’re lucky — our house was built in the ’70s, when ceiling fans were the rage in L.A. But they’re not a big ticket item. You should be able to find a high quality ceiling fan at a lighting store or on the Internet for as little as $35. They run more if you want one with light bulbs and, of course, you can spend a few hundred for a special look. They come in all different colors and styles. Hunter and Casablanca are among the better brands. Installation runs about $100 though occasionally more if your ceiling isn’t built to easily take a fan and a new electrical junction box is needed. Ceiling fans almost never break. They’re pretty much like the Eveready Bunny.

If you haven’t already tried this strategy for saving on your electric bill and decide to try it (it’s not rocket science!), let me know how it goes.

For more information about ceiling fans and a photo, click here. If you’re in L.A. and would like a ceiling fan installed, please give us a call at (800) 990-9400 from 8-5. We’ll be happy to help you save electricity, money, and the planet.

Kim Hopkins CEO, The Electric Connection