In case there is a flash flood or storm in your area or if there is a severe plumbing leak or pipe burst, that can result in flooding of water in different areas of your home. Water can cause a lot of damage to the installations and features on your property, and you would have to start the clean-up and repairs without delay. This is also when you start evaluating what can be salvaged and what would have to be replaced – and this includes your home’s wiring.

The wiring inside the walls can become dysfunctional and dangerous if it’s exposed to or submerged in water. If there is a severe flood, it becomes important to completely replace the wiring in your home. Not too many builders actually use wiring that’s rated for water exposure of this kind. Of course, not much can be done till the time all the flood water recedes and all the water has been cleared out from your home.

Even when all the water is pumped out from the indoor spaces, it’s best to shut down the electricity supply at the circuit box mains before continuing with anything. Call in your local electrician to test the wiring in your home. Even if it is still in a working condition, it’s never a good idea to use it.

The insulation can get degraded and that can raise the chances of an electrical fire in the future. In addition, when there are traces of moisture in the wiring, that leads to mould & mildew growth and the metal parts in the system can corrode. This is especially the case when the property has become flooded with salty water.

When it comes to rewiring jobs, you also have to factor in the cost of opening up the wall panels and fixing them. In instances of a flood, the walls are generally torn down right up to the framework. If you take this opportunity to upgrade the wiring in your home, you can save a significant amount of money.

Floodwater is never clean and that proves to be an additional hazard to the wiring and other installations in your home. Chemicals, oil, sewage and a number of other contaminants that come with the floodwater work their way into the smallest spaces, and this is why it’s best to just start afresh with the installation. In comparison, if your home’s wiring has been impacted by water from a burst pipe, you might be able to save these features; this is because it may not be fully-submerged in water.

However, it’s never a good idea to test the condition of the wiring yourself and you should call in a skilled and licensed electrician to thoroughly check and evaluate the installation and give their opinion. Regardless of whether the wiring in your home has got impacted by flood water or water from a damaged plumbing installation, it’s important to get it checked without delay. The professionals will provide suitable solutions based on the condition and location of the wiring.

Tube lights are found in many applications and environments such as office buildings, hallways, garages, and really anywhere that has a low and flat ceiling. Although fluorescent tubes contain small amounts of mercury and isn’t a whole lot, you still want to avoid the breaking of a fluorescent tube and any exposure to mercury if possible.

Whether you are simply replacing a burnt out fluorescent tube with a new one or are switching over to a new technology (such as LED), there is a proper way to do it. By following these steps along with others that you may find, you will allow yourself to reduce risk of harm for yourself, staff, or whoever is the one physically replacing the tube lights.

Let’s answer some common questions and issues that people seem to face when tasked with this issue of replacing mercury filled fluorescent tubes…

By recycling rather than simply throwing away your tube lights, you opt-in for the environmentally friendly route of switching out old tubes. If you choose not to recycle, you are allowing toxic mercury to freely enter the environment, which of course is not good.

Not only do you prevent mercury from freely entering the environment by recycling, but you also reduce waste. How exactly? Part of the tube is reused for new tubes that will be resold and used. This allows for less waste and this goes back to the saying “Reduce, Reused, Recycle.” So by taking part of fluorescent tube recycling, you allow the process of recycling to continue and prevent waste from entering the landfill!

When taking your tubes out to bring for recycling, this is probably the most difficult step you need to be most cautious with. The best option you have is to be prepared and know what to do if things go “south” as they like to say.

Here is what you can do to prepare for the removal of fluorescent fixtures:

And for one thing that you should always remember for dealing with a broken tube is this: NEVER VACUUM. By vacuuming, you make glass particles go airborne and that is a highly dangerous situation to be in.

For more tips on how to clean up a broken fluorescent or CFL lights, using this tool from Earth911. It allows you to search what you need to recycle and where you are located. So you go to that tool, type in ‘fluorescent’ or ‘CFL’ along with your location and you will surely come across the closest place to recycle fluorescent tubes (along with really anything else you may want to recycle).

If you are in the process of disposing and recycling your fluorescent tubes, what is going in there to replace the ones you are removing? If the answer is “more fluorescent tubes,” may we ask why?

Winter is well on its way in the DMV area. So are you prepared for the worst-case scenario of a power outage? If not—you could be facing cold days and nights without power in the event of a severe winter storm! That means now is the time to start prepping your generator to make sure you’re ready for when the worst happens. It’s better to be safe than sorry!

For generator maintenance, contact the experts at Kolb Electric today!

With a few easy tips, you can make sure you have warmth and lighting all winter, regardless of the weather outside. For your generator, make sure you:

In addition to these checks you can do on your own, it’s important to have your standby generator inspected by an authorized sales and service dealer. Remember—many home and commercial generators have a limited warranty and require service from a licensed technician in order to make sure the warranty can be honored.