Homes that were built more than 10 to 20 years ago are likely not equipped with the much safer grounded-fault circuit interrupter outlets in the kitchen and bathroom areas. GFCI outlets are ideal for use in areas where there is potential for an appliance to be exposed to water. Everybody knows water and electricity don’t mix. But, we need our gadgets and just try to be extra careful. Unfortunately, accidents happen. A Los Angeles electrician, like those at The Electric Connection, can help you protect not only yourself, but your family members from suffering serious injury when one of those little accidents happen.

The difference between the standard outlet and the GFCI outlets is the safety feature that cuts power to the appliance the second there is an interruption in the flow of electricity from the outlet to the appliance. The breaker will be tripped if the circuit does not flow along the correct path and is interrupted by your body for example. This protects you from suffering an electric shock. If you accidentally drop the blow dryer into the sink while the water is running, it could be an extremely dicey situation if the dryer is plugged into one of the old-style outlets. Power will continue to run to the dryer until the water shorts it out. You would risk receiving an electric shock if you tried to grab the blow dryer out of the sink while the electricity is still flowing.

If you would like to protect your family from these kinds of accidents, call an electrician. Los Angeles homeowners can have current outlets in the kitchen and bathrooms replaced with GFCI outlets without a lot of hassle. These outlets are great for anywhere in the house and can also prevent shock from wires that have been damaged by rodents chewing through or that have been ran over by the vacuum. Give The Electric Connection a call today and schedule your outlet upgrade.

One of the biggest energy hogs in your home or office is the computer and the peripherals attached to it. Luckily, there are many ways that you can save energy in your daily life by just making a few simple changes. If you are interested in more extreme changes, contacting The Electric Connection, your best resource for an electrician Pasadena knows and trusts, may be the best step. However, for now, next time you are using your computer, consider these simple tips to reduce your electric usage. (Read More)

As you can see, these are very simple ways that you can save electricity and save money. Talk with an electrician in Pasadena from The Electric Connection and find out if there are other things you can do to save on your bill each month.

It used to be that the moon and the stars were the brightest bulbs in the sky. But as anyone who’s flown across a city at night knows, these days, there are an awful lot of outdoor lights shining up from the ground.

Many people assume that an orange nighttime sky is just ugly, not harmful. But recently scientific studies have suggested that light pollution is more than an annoyance; it’s destroying wildlife, damaging human health and costing us a lot of extra money.

That’s why a growing number of cities and towns across the United States are drafting ordinances to try to bring the night sky back. They’re requiring that all new outdoor lighting fixtures that are installed – both commercial and residential – only shine light down onto the place that needs to be lit, not up into the atmosphere.

Known as the Dark Sky movement, these ordinances vary from town to town, but often the requirements are similar. No outdoor lighting fixtures can shine any light above a horizontal line. Instead, everything must shine down.

“We’re not saying you can’t have that aesthetic value, you just light it from the top down,” explains Johanna Duffek, Sections Coordinator with the International Dark Sky Association, a Tucson, AZ-based non-profit group that’s at the forefront of the movement.

Although the original purpose of The International Dark Sky Association was to keep the night sky pristine for astronomers, today the Dark Sky movement is gaining ground because more consumers are interested in reducing their energy usage, and when you’re not wasting light that’s going up into the sky, you can use a lower wattage bulb to achieve the same level of exterior lighting.

For example, if a homeowner used an outdoor sconce that had openings on the top and the bottom, he’d have to use a 100-watt bulb. But if he switches to a Dark Sky fixture that only allows light to shine from the bottom of the fixture, the homeowner could use a 40-watt bulb.

“It’s a more efficient use of light,” explains Tom Patterson, Director of Product Development at Hinkley Lighting, which already offers some Dark Sky light fixtures. “You can use a third of the wattage or half of the wattage and get the same amount of lumens.”

Patterson says consumer awareness of the Dark Sky movement is still very low, but he said awareness has been growing among local government leaders, and that is forcing the manufacturers to come out with more and more Dark Sky-friendly outdoor fixtures.

“Now in Arizona, in all the new construction, you’re going to have to meet the dark sky qualifications,” Patterson says. “It’s catching a little bit more momentum.” Hinkley, for example, advertises that it can make about 25 percent of its outdoor lighting fixtures Dark Sky compliant. Retailers are charged about $15 to $20 to change a regular fixture to a Dark Sky fixture.

Currently, there is no official government standard for a Dark Sky fixture, but the International Dark Sky Association has been in talks with the Department of Energy to incorporate the Dark Sky philosophy into the Energy Star program.

The International Dark Sky Association also independently evaluates fixtures from manufacturers and awards a seal of approval to all of those that meet its requirements.

So far, Duffek says the International Dark Sky Association has awarded Fixture Seals of Approval to 75 different lighting manufacturers, and while many of those have been commercial applications, Duffek says the organization is hoping to increase participation among residential lighting manufacturers.

Hubbardton Forge, for example, makes a sconce that has received the Dark Sky Fixture Seal of Approval that features a slate-colored ceramic shield around the light bulb that forces the light down. And the Minka Group has several outdoor lights with metal crowns that block the upward light.

Both Patterson and Duffek say the biggest resistance to Dark Sky fixtures isn’t coming from manufacturers but from homeowners who are afraid that less exterior lighting around their house will make them less safe.

But Duffek said homeowners need to understand that blocking light from going into the sky doesn’t mean blocking all exterior lighting. Duffek says the Dark Sky movement suggests homeowners buy outdoor lights with movement sensors that will go on if someone enters your yard, which can help alert you to danger and keep your energy usage down at the same time.

“When you keep the lighting on all the time, all you’re doing is lighting for the bad guys,” Duffek says.

Duffek says the biggest challenge now is to educate the public about the benefits of reducing light pollution and encouraging manufacturers to continue to design compliant fixtures.

“We always try to present it as a win, win, win solution,” she says.

Show off your style and freedom of choice with superb outdoor hanging lanterns and light fixtures from “All American” home lighting and furnishing vendors.

Hanover Lantern, Hubbardton Forge and Northeast Lantern feature outstanding designs manufactured exclusively in the USA and infused with American pride.

HANOVER LANTERN

Hanover Lantern with roots near historic Gettysburg, Pennsylvania brings in the endearing elements of small town USA.  Trusted Old World values live on in their custom made-to-order outdoor lighting compositions.

Hanover Lantern’s commitment to creating an American-made, quality product is highlighted in their cast aluminum outdoor lighting products and accompanied by superb accessories, including mailboxes and address signs. Featured on the finest homes, businesses and resorts throughout the United States and Canada, Hanover Lantern is now a Philips Company.

Philips Company, the largest lighting manufacturer in the world, has put their name behind Hanover Lantern and lives up to their slogan: “Tailor Made to Fit Your Style.”

HUBBARDTON FORGE

Hubbardton Forge Lighting fosters an environment infused with collaborative energy as designers, engineers and craftspeople work side by side free to connect, explore and create.

Housing “The Modern American Blacksmiths,” Hubbardton Forge is the oldest and largest commercial forge in the country with a team of over 200 people creating hand-forged compositions infused with timeless beauty and artistry.

A company that is accessible and always responsive to special design requests and individual decorating requirements, Hubbardton’s strong commitment to outstanding design and the development of energy-efficient lighting solutions is showcased in every piece.

Structural integrity in heavy gauge steel, durable finishes, hand-welded arms and shafts, and premium grade internal components ensure products last for generations.

Pioneers of environmental cleanliness and innovative manufacturing processes, Hubbardton light fixtures are composed of raw steel from a high percentage of recycled materials and a state-of-the-art powder coating finish free of hazardous waste and toxic chemicals associated with liquid finishes.

Resistant to rust and corrosive elements, creative works from Hubbardton Forge Lighting lend splendid illumination to your indoor and outdoor lighting design.

In addition to awe-inspiring outdoor hanging lanterns and light fixture designs, skilled artisans at Hubbardton Forge also create unique home décor items, including mirrors and bathroom accessories.

When you own a Hubbardton Forge pendant, lamp, chandelier or outdoor hanging lantern, you own a piece of Vermont-made art of enduring value.

NORTHEAST LANTERN

Handcrafted light fixture compositions from Northeast Lantern come to light right in the state of New Hampshire.  Light fixture designers and craftsmen are trained by the New Hampshire Department of Environmental Services to present a finished product in a clean and green manner.

From the classic “Colonial” collection to the modernistic “Midtown” collection, light fixture designs from Northeast Lantern represent the enduring spirit of American life.

Enjoy reasonably priced outdoor lighting fixtures made of solid brass and copper from Northeast Lantern.  Northeast Lantern products are custom designed with unique variations in hand-applied natural finishes.  Outdoor hanging lanterns and light fixtures will darken and weather over time; retaining their beauty, they will never rust, peel or chip.

With the exception of glass, Northeast Lantern guarantees all products for life.

Enjoy the best of America; check out new “Boston” and “Concord” collections from Northeast Lantern.

From Generation to Generation, Hanover Lantern, Hubbardton Forge and Northeast Lantern Continue to Provide the Best

Keep your stars and stripes shining true with top quality outdoor hanging lanterns and outdoor light fixture designs.

Celebrate July Fourth Weekend with these American Beauties…

New from Northeast Lantern

The “Independence” outdoor lighting collection.

New from Hubbardton Forge

The “Modern Prairie” collection 36-5710

New from Hanover Lantern

B9976 “Four Sided Series” outdoor hanging lanterns

Visit a Capitol Lighting showroom or shop 1800lighting.com to view the finest in home lighting and accessories.  Celebrate your American pride and enjoy spirited new designs from Hanover Lantern, Hubbardton Forge and Northeast Lantern!