Any time of the year is a good time to save money, especially when it comes to the issue of one’s electricity bill. However, it is very understandable that the summer season is when one’s electricity bills tend to go straight through the roof because of the increasingly hot weather! This summer season, make sure that you end up saving some money on your electricity bill with the following energy savings cost cutting tips.

For starters, make sure that you keep your TVs and also your lamps quite a distance away from your thermostat. You see, both TVs and lamps emit heat, therefore prompting your air conditioning to actually run excessively and more than it really has to! Instead, place your TV and lamps across the room and think hard about switching to compact fluorescent bulbs.

Insulation is yet another thing you should do properly if you want to attend to your energy savings and your summer electricity cost cutting steps. You ought to insulate in an intelligent manner, for one thing. This means that you should look to insulate in some areas more than others, such as the attic. When you insulate your attic, you actually lower the negative effects of the heat that stem from the scorching rays of the sun. If you do this correctly, you are going to stop the heat that tends to build up on top of your home from actually filtering down to the rest of the residence.

Sometimes, your summer electricity cost cutting measures are so simple that they may even seem deceptively…simple! Take for instance the issue of your windows. When days get really, really hot in the summer months, just remember to close either your blinds or your curtains prior to leaving for work in the morning. This will minimize the effect of the sun’s blistering rays from beating down into the various rooms of your residence, thereby warming up your home to unbearable levels. As a sweet bonus, the fading effect of the sun’s rays to your rugs and your furniture will also be minimized.

Finally, you should use your microwave more than the oven for when you are preparing dinner. If you utilize your microwave, you can efficiently get your dinner ready in just a few minutes rather than an hour, and you will also be generating a lot less heat than if you utilize your oven!

So as you can verily see, there are a lot of things that you can do with regard to saving some money on your electricity bills over the summer. All that matters is that you have to be committed to adopting some of these money saving tips over the summer.

One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

The lighting industry has been busy as ever this month, from the slow-climbing successes of LED adoption to the discovery of new galaxies. Have you kept up? Allow us to offer a taste…

It’s only a matter of time before LEDs make serious headway into the retrofit market. Forbes predicts that by 2021, LEDs will make up approximately half of all retrofits in a market where they currently only make up about 5%. Read more…

Cree and Home Depot recently partnered to offer more affordable LED light bulbs to consumers. Nasdaq predicts that Wal-Mart will soon follow, based on a recent announcement from GE about lowering the price of their Great Value LEDs (sold at Wal-Mart). Image via houzz.com

There is an art to proper bathroom lighting, and it involves a lot more strategy than you’d think! For one, this author adamantly believes you should not light a mirror from above because it casts unsightly shadows on your face. Read more…

After you’ve been around something for a while, you start to take it for granted.

Things like dissolvable cornstarch packing peanuts.

It took one imaginative 11-year-old boy and an email from a happy customer to remind us just how nifty these little earth-friendly peanuts are.

If you’ve received a shipment from Pegasus Lighting in the past few years, your box most likely had a sticker on it with those words. Inside the box is a note that shares the reasons behind our choice to use biodegradable cornstarch packing peanuts, not the least of which is because they are really fun to play with.

Thank you, Happy Customer, for restoring our packing peanut fascination by sending this great note and photo of your son’s clever art sculpture (whatever you decide that it will be)! Oh, and for the record, I’m voting Rocket Ship.