A problem so many people deal with and assume there is no real solution to is bathroom lighting needs in the dead of night. Turning on the light to take care of business can be too much. It is too bright and ends up blinding you before waking you completely up and making it next to impossible for you to fall back to sleep. You may feel like you are forced to choose between complete darkness or too much light, but an electrician in Burbank has another option. The reliable team at The Electric Connection wants to help you take care of your bathroom lighting woes.

Under the Cabinet Lighting

You can add some light to the bathroom without making it completely by blinding by placing it low to the ground. A rope light placed under the lip of the bathroom counter near the floor adds just the right amount of light in an area where you really need it. This is a quick and easy job for an electrician. Burbank homeowners will appreciate the effect the soft lighting gives the room as well as its usefulness.

Outlet Nightlights

These are very handy and shed just the right amount of light over the sink area. The lights are attached inside the outlet cover and do not require the services of a Burbank electrician. The lights work on a sensor and will automatically turn on when it is dark.

Lighted Toilet Seats

These may not be quite as practical, but they are certainly very neat looking. It isn’t the actual seat that lights up, but the hinge of the toilet seat. The soft glow of light illuminates the bowl and gives a person a little direction.

If you would like an electrician to take care of these small bathroom lighting jobs, give The Electric Connection a call today and schedule your appointment.

Is there a better way to kick off a lighting design awards show than to distribute glowsticks to the finalists for “experimentation”?

Well, we can’t think of one.

The photos below have been floating around on Twitter in anticipation of the 2014 Lighting Design Awards, a worldwide architectural lighting competition to be held in London on March 20. Leave it to the creative lighting professionals to craft a rainbow motif, an “alien landing” scene, and a dog collar – all from a box of glowsticks.

The majority of contractors and building owners are creating networks that interconnect all the components. These provide a single point of monitoring and control the different types of devices, sensors, and equipment.

While wiring the building during the construction phase is the ideal situation, modifying or upgrading existing systems can be challenging.

As the building gets bigger and more complex, so does its automation, making it a real task to interconnect all components. It may require hybrid systems consisting of the UTP, RS-232/RS-485, wired and wireless networks, and a variety of protocols. However, there is still a need to unify all these. It’s best to have a single point of managing and controlling the devices regardless of the style, location, function, and type of network.

As building automation evolves, there are now industry standard network protocols that allow people to interconnect components from different manufacturers. The three most commonly used interoperable protocols in use today include:

Building automation enables efficient control of the various systems and conditions in the building. This allows the occupants and owners to save costs, while improving comfort and living conditions. It adds the ability to automatically monitor and adjust the lighting, air conditioning, heating, ventilation, security and other parameters. Specific benefits include:

Building automation offers several benefits to the owners and occupants of the facilities. It allows the savings of resources such as energy and water while improving the conditions and comfort of the space.

As building automation networking evolves, equipment and applications from different manufacturers are able to work together via standard interfaces and protocols. This allows consumers to benefit from the latest technology and decreases our ecological footprint.

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Without proper lighting, the details in your furniture and artwork at first sight go unnoticed. Careful lighting design gives dimension and texture, revealing the articulacy of your home décor. Creating the proper lighting setup lies in finding the correct spacing, fixtures and functions for each room. Every lighting technique brings you closer to customization and works together to establish a healthy balance between posh and practicality.

Consider adding toe kick lighting under the counters of your kitchen or bathroom to balance light between the ceiling and floor. It’s subtle yet useful, and provides an extra cushion of safety. Toe kick lighting arrangements also bring depth to unlikely spaces.

Don’t neglect the nooks and crannies of your home; light them up. Take advantage of layering through the use of key, task and accent lighting. Key lighting will provide basic light function overhead. If used alone, it will provide flat, uninteresting light.

Reading lamps are the perfect approach to task lighting and can be placed on your bedside table or next to your favorite lounge chair. And, accent lighting gives the finishing touch. It highlights details that slip under the radar if left in the dark. Add accent lights to illuminate intricate artwork, plants, cabinet silhouettes and wall textures.