The strike doesn’t even have to be a direct hit on your home but can occur within half a mile.  As a matter of fact, the majority of surges that most people take are from problems at someone else’s home or somewhere further down on the power company lines.  A surge doesn’t have to be lightning; it can come from an automobile accident that hits a power pole or even from a routine maintenance on the main power lines when they turn the power back on.  This off and on of the power with the main electrical lines can send surges into your home or business that I have seen destroy lots of electronic equipment and appliances.

Almost every home has multiple computers, and expensive home entertainment systems.  Even our appliances are high-tech with monitors built into the doors of refrigerators and laundry appliances with electronic controls.  These items are especially vulnerable to spikes in your home’s electrical current that may cause melted circuit boards and overheated wires.  Repairs to these expensive gadgets are much more costly than replacing a blown out light bulb or electrical outlet.

One of the most frustrating experiences as a homeowner is having the power go out unexpectedly. Not only does this scenario instantly leave you in the dark, losing electrical service can have drastic effects on your appliances, especially if the power outage is due to a surge or faulty electrical panel. If your power suddenly goes out, here are a few things you can do to protect the appliances and electrical fixtures in your home.

Turn off light switches While it may seem a little silly to turn off lights that are not currently working, turning off the light switches in your home can prevent further damages once the power kicks back on. Grab a flashlight from your emergency supplies and make sure all of the light switches in your residence are switched off.

Call your local electrician If the power has failed in your home, but not in the neighborhood, you’ll need to contact a 24 hour electrician to visit your home and determine the cause of power failure. If you find yourself in need of an emergency electrician in Des Moines, call Electrical Gurus any time of the day or night at 515-446-7040 or contact us online 24 hours a day.

You have probably heard about electrical safety since the time you can remember. However, because we are so used to using electricity and having it around us all the time, we rarely stop to really think about it. Complacency can be dangerous. It is important to take a step back and really look at your home and surroundings. Are there any electrical hazards looming? Are you practicing safe electrical habits? An electrician in Burbank has some quick tips for you to practice. You can always call The Electric Connection to learn more and ask more in depth questions about electrical safety.

1-Only have electrical work in your home completed by a qualified Burbank electrician.

2-Plug large appliances like refrigerator, oven and microwave directly into an outlet.

3-Use GFCI outlets in the kitchen and bathroom area. These should be installed by an electrician. Burbank residents can protect themselves from electric shock in areas where water is present with this type of outlet.

4-Don’t make extension cords a permanent solution. If you need more outlets, have some installed by an electrician.

5-Don’t plug more than one heat producing appliance i.e. toaster, space heater, coffee maker, into an outlet at the same time.

6-Have all remodel work completed by an electrician.

7-If you are buying a new home, have it inspected by an electrician first.

8-Only use lightbulbs that are appropriate for a light fixture.

9-Ensure electrical cords are not damaged or at risk of being damaged from being run across walkways or smashed in doors.

10-If you experience a tingling feeling or small jolt when plugging in an appliance, stop! Don’t use the appliance until you can have the outlet inspected.

These are quick, basic tips that can actually prevent serious injury. If you have any questions or need an electrician to complete some work or an electrical inspection, give The Electric Connection a call today.

Time to fall back and re-adjust to a new light!  Daylight Savings Time ends on November 2nd and our circadian rhythms may be upset as we are forced to accept the darker mornings.

Don’t despair, a few simple tips will help make for an easy transition.  From landscape to living room, we’ll show you how to adjust your lighting design for the change of season.

3 Surefire Ways to Keep your Circadian Rhythm in Check and Attune your Light to the Season

1.  PERFECT TIMING:  Reset timers on outdoor and landscape lighting.  Timers for outdoor lighting should be set to go on after sunset.  Automated timers may be wall-mounted indoors or on transformers outside.  Newer systems may be powered to photocells which adjust light fixtures automatically for Daylight Savings Time. Photocells are activated by natural sunlight, so that lights will go as soon as it gets dark outset.  For the coming winter months–timers for outdoor lighting should be programmed to go on around 5 pm and shut-off around 3 am.

2.  KEEPING YOUR SPIRIT UP:  Many individuals experience a lack of energy and/or depressed mood during the winter months due to their decreased exposure to sunlight.  Adding daylight bulbs to table or floor lamps will brighten up your interior space and may help to keep your energy and spirit up throughout the day.

Frosted True Daylight lamps from Bulbrite Industries utilize neodymium to replicate sunlight to  help you “see better, feel better” and adjust to seasonal changes.

3.  STAYING IN TUNE TO THE NEW NORMAL:  Studies have confirmed that lighting our homes and offices in tune with our natural circadian rhythms is beneficial to overall performance and well-being.  “Tunable” lighting is the wave of the future.  From setting our lighting designs to be in perfect unison with our sleep-wake-performance schedules to illuminating entire rooms in our favorite colors, we have the technology to change our lighting design according to the season and the ceremony!

Visit with a professional lighting consultant at a Capitol Lighting showroom or 1800lighting.com for personalized attention to your lighting design scheme.  Keep abreast of the latest lighting news at 1800lighting.com.

Surely you have seen electrical outlets your entire life… but do you know how they work? Their purpose is so important, it can actually save your life. If you read our article last week, you will understand how the electricity has already arrived at the outlet. Grounded electrical outlets then take the energy from your home electrical system and make it available. Here is more about what they are and how they work.

In Canada we have the three-prong outlet that you are familiar with. The outlet’s left hole is smaller and it is the “neutral” slot. The right hole is slightly larger and this is called “hot”. The bottom hole is the “ground”. The electricity flows in a loop, traveling from hot to neutral. This means when you plug your television in the electricity will flow from the hot slot of the outlet, into your television to power it, and then out to the neutral slot.

You have probably noticed that some appliances have only two prong plugs and some have three. This is because some appliances need to be grounded. Electricity always flows towards the ground, and when the electricity flows into your body and into the ground, you experience electrocution. Instead of a body potentially absorbing this current, the grounder redirects the electrical current traveling into the outlet so you will not be hurt. Items that have metal casings, such as televisions and computers, will have their metal cases attached to the grounder so that a current will not accidentally run throughout the case and shock you when you touch it.

When electricity becomes unbalanced in the electrical outlet, the outlet will “trip” and shut off the flow of electricity. For example, if an electronic device comes into contact with water, electricity will escape into the water. Once the outlet detects that less electricity is coming into the neutral slot than what should be, it will shut down. This safeguard protects users from potential harm.

By playing or tampering with an electrical outlet, you can get hurt or severely injured. It is important to use the appropriate equipment and follow manuals before plugging in electrical devices. If you need to make changes to your electrical system you should consult a professional first.