It might be hard to believe, but even with as cold as it’s been, spring is on the way! And while you’re out enjoying the outdoors, the Sterling electricians at Kolb Electric want to bring you some electrical safety tips to make this spring safe and fun!

Keep power cords away from water – you probably already know this, but water and electricity don’t mix. Any time you’re dealing with electricity, make sure you’re working in a completely dry environment. You should also consider testing your GFI outlets.

Beware of power lines – if your spring cleaning involves getting up on a ladder or using a long-handled pool-cleaning tool, make sure you know you’re clear of power lines before you start. Power lines are interesting—if you were to hang from one without your feet touching the ground, you would be safe. However, coming into contact with power lines while you’re standing on the ground is a different story, as the electric current will travel through you on its way to the ground. Note that if the power lines are low enough, this could happen even if you’re just standing under them!

Always call before you dig – underground power lines are just as dangerous as overhead power lines, and since you can’t see them, it’s almost impossible to know where they are! If your spring plans involve digging of any kind, like adding an addition to your home or even planting a tree, make sure you call to confirm that it’s safe to do so!

Keep materials, tools, and all body parts at least 15 ft away from overhead lines – like we said above, power lines can strike you even if you’re standing too close to them. 15 ft is the safest minimum distance, so make sure you’re aware of this, especially if you’re working on the roof.

Never fly kites or model airplanes near power lines – we keep harping on the power line issue because they can be very dangerous if you’re not careful. If you have a kite or model airplane that ends up getting tangled in power lines, don’t try to get it down yourself—call your local utility provider for assistance. As a side note, make sure you never use any metallic materials in your kite—these can conduct electricity back to you.

Inspect power tools and electric lawn mowers before every use – frayed power cords, broken plugs, and weathered or damaged housings can make your equipment dangerous to use, so don’t use anything until it has been repaired properly. When not in use, keep these tools unplugged and store them in a dry area.

Watch out for power lines hidden behind foliage – before you trim tree limbs and shrubs, make sure there are no power lines hiding behind them. If you are concerned about tree limbs growing on or around overhead power lines on your property, call your local utility provider.

Keep your electrical box clear – you know that large, green, ground-level box you may have in your yard? That box houses the components of an underground electrical system. Keep it clear of vegetation and other permanent structures, as utility workers may need to access the underground lines and equipment during unplanned outages or routine maintenance.

Do not use electric mowers on wet grass – as we said in the beginning, water and electricity are a dangerous combo. Only use an electric mower on dry grass, and if you need to use an extension cord, make sure you use an insulated cord designed for outdoor use and with the correct power rating for your equipment.

Treat all power lines the same – some power lines are high voltage, some are low voltage. For safety, treat all power lines as if they are harmful—because chances are, they will be!

The Sterling electricians at Kolb Electric want to wish everyone a happy and safe spring season. And if you need an electrician in Sterling or anywhere else in the MD/DC/VA area, call Kolb Electric today!

This Father’s Day, get out of the tie and money clip routine with 15 bright gift ideas that shine a light on Dad’s favorite past times. Is your dad a grill master, an adventurer, an artist or a hardcore movie buff? Or is he one of those guys that has his own personal style that can’t be nailed down to just one? Whatever the case, chances are good that we’ve got a lighting gift to match his style:

Pool lighting makes up a major part of your overall swimming pool costs, so it’s important that you figure out which type works best before you install them. The two major types of pool lighting are in ground lighting and above ground lighting, and your budget, needs, and preferences all factor largely into deciding which type to install. We’ll help you break down all types of pool lights to help you make the best choice for your Maryland, Virginia, or Washington, DC home—just keep reading!

One of the biggest benefits of in ground pool lighting is its streamlined look and even lighting. The two primary options for in ground pool lighting are LED lighting and fiber optic lighting (we’ll get into the pros and cons of each further down in this blog post).

Usually much cheaper than in ground pool lighting, above ground pool lighting is perfect for DC area homeowners looking to install a pool on a budget. There are a number of different ways to install above ground pool lighting, including:

Floating Pool Lighting

Floating pool lighting is exactly what it looks like. This type of pool lighting involves lights that bob up and down on the surface of your pool. It is available in a variety of colors and shapes, from orbs, cubes, and pods to more creative features like jellyfish shapes, flowers, and more. Floating lights can be solar powered and tend to use bright LEDs, but since they move around they don’t provide perfectly even lighting.

Magnetic Pool Lighting

If you have a soft-sided pool, magnetic pool lights are perfect for you. These two-part lights can be attached to the liner of your pool for an in ground pool lighting appearance with above ground ease.

The two major types of in ground pool lighting are LED and fiber optic, and each type has its own advantages and disadvantages for homeowners in Maryland, Virginia, and Washington, DC. Consider the following:

LED lighting – LED lights are housed in waterproof bulbs that can be removed to change the bulb. The bulb itself should last around 10,000 hours, however, so you won’t need to perform even this simple task very often. One to two bulbs should be enough to illuminate your entire swimming pool.

Fiber optic lighting – bulbs for fiber optic pool lights are located out of the water, making them even easier to access and replace than LED pool lights. To illuminate a whole pool, you’ll likely need more than one fiber optic light, though, which can get expensive.

LED lighting – LED lights range from $400 – $900 installed, and bulbs can last anywhere from 10 – 15 years. Replacement bulbs will run you about $200 – $400.

Fiber optic lighting – a fiber optic pool lighting system will require a fan to keep the light cool, meaning fiber optic pool lighting will be more expensive than LED lighting—think anywhere from $900 – $1,500 per bulb system. Bulbs typically last about 3 – 7 years, and replacing them will cost about $200 – $300.

LED lights – despite having the lighting components under water, LED lights are very safe and have a very low risk of failure. In addition, LED lights use very low voltage, which mitigates the risk further.

Fiber optic lighting – since there are no electrical components housed in the water, fiber optic lighting has close to zero risk of electric shock.

LED lights – LED lights can be used to fill your whole pool with light and illuminate the whole thing at once. They can also change colors to create a truly unique look for your backyard.

Fiber optic lighting – these types of pool lights aren’t as good at illuminating the whole pool at once, but they can create points of light to give your pool a sparkling, starry appearance.

In purely practical terms, LED lights have the edge over fiber optic lights—they are less expensive, easier to maintain, and provide much brighter illumination. But there are advantages to both types of pool lights, and Kolb Electric can help you find the perfect fit for you and your home. We can also provide you with further pool lighting tips here.