Overlamping is when a lamp-holder socket has a bulb with a higher wattage than the socket is designed for. Not every lamp-holder socket in your home is rated for the commonly used 100-watt incandescent light bulbs. This is a code violation and a highly dangerous fire hazard.

For instance, if you connect a100-watt light bulb into a 75-watt lamp-holder socket, the intense heat coming from the bulb can melt or scorch the socket, potentially exposing the electrical wires underneath. This is a possible fire hazard as it increases the risk of arcing. Arcing is when sparks jump through the air from one wire to another, and research has shown that it is one of the most common causes of electrical fires.

The United States system of safety standards requires that electrical equipment be listed. Listing is a tool used to facilitate acceptance of electrical equipment. Most lamp holders are listed up to a particular wattage depending on the type of fixture used. This rating is derived from things such as the types of materials used in the construction of the fitting as well as where it will be placed. This causes varying levels of wattage, although most common lamp holder sockets are rated 75 watt.

You may find that some sockets in and around your home are listed at 40 watts or even 25 watts. An electrician can test the sockets in your home and confirm the maximum wattage for each one.

Most experts agree that using a bulb with a maximum wattage of 75 watts is the safest option, but you can always ask your electrician for help to be certain. Modern high-efficiency lamps are much safer because the majority do not exceed 75 watts of energy consumption. For older and unmarked fixtures, it is best to use a 60-watt bulb instead.

If you notice a lamp-holder socket in or around your home that looks as if it is scorched or melted, it is best to ask a professional for help before using it. If you would rather not seek an electrician’s assistance and choose to do the repairs yourself, ensure that you have switched off the electricity at the mains and that you have the correct tools for the job.

2017 is here, technology is improving, and we’ve decided to put together of our 4 best warehouse lighting fixtures that we have here on MyLEDLightingGuide. This is not a comparative list, but rather a list of our best lighting technologies for warehouses that is up to date and current for the year 2017.

Although all the lights on this list might not apply to you, surely there will be a few on this list that apply to your needs (e.g warehouse aisle lighting). As we go through the list, keep in mind that these are all currently available and can be inquired about by

In warehouses, replacing old and outdated fixtures entirely can be a pain. Our easy to install LED high bay retrofits make it easy to replace metal halide warehouse bulbs with LED without the costs or hassle that comes with an entire fixture replacement. This is a highly popular option when warehouses look to LED to bring savings in their warehouse or factory.

Since there are so many options of these fixtures,

Maybe you are in need of entirely new fixtures, not just a retrofit kit. Our extensive listings of LED high bay fixtures gives you a great option to fully replace existing fixtures or even an entire lighting redesign.

If you are in an industry which requires explosion proof lighting, our high and low powered options are great to fit in warehouses (factories more often). You have the required explosion proof light that you need with the benefits of LED technology which is going to save you money. learn more about LED warehouse lighting options here.

When you are purchasing a home, it goes without saying that you want to be sure the house is structurally sound, and that there are no lurking problems that will surface later and burn a hole in your pocket. It’s why many people get a building inspection and pest inspection done before they sign on the dotted line. While all of this sounds good, what most people aren’t aware of is that they can and should get an energy audit done too.

An electrical audit analyses the major components of the house structure; this includes:

In short, it gives you a very detailed picture about how the buildings works as a whole. For a couple of hundred dollars, you can get an energy audit done from a professional. This audit can save you a significant amount of money in the long term; it identifies the features in the house that require correction to enhance the energy-efficiency. At times, the energy audit results can play a pivotal role in your decision of whether you should invest in a particular property or not.

If you find that a house lacks in energy efficiency, but you still want to buy it, the audit results can become a bargaining tool; it may help you get the seller fix the problem, or you may be able to get the property at a much lower price. No matter which way you look at it; getting an electrical audit is a very good idea. In addition to the ones mentioned above, there are a number of other benefits to getting an electrical audit done, such as:

The simple fact is that spaces that are energy-efficient are also more comfortable to live in. Energy-efficiency upgrades will ensure that the heat will be evenly distributed across the home and your home will be warm in the winter and cool in the summer.

If the indoor air quality in your home is poor, it can cause allergies as well as other health problems. When you choose to get an electrical audit done, the professionals that are conducting the audit, carefully analyse the ventilation in your home and also recommend what can be done to improve the indoor air quality.

Energy efficiency may seem like an isolated aspect in the sustainability of your home. But when discrepancies in the building structure come to the fore during an energy audit, it’s indicative of the fact that many features are constructed poorly and that they will fail before their time. Once you have the audit results, you will get a clearer idea about what will have to do be done to improve the building envelope as a whole.

When you are hiring the services of an electrical/energy auditor, you should keep in view the fact that not every one of them uses the tools and follows the required processes while the audit is being conducted. Ideally, the auditor should use tools such as a duct blower, an infrared camera as well as a blower door.

The blower door is essentially a fan that has to be mounted on the doorframe. It efficiently depressurises & pressurises the home to measure what the air leakage is like. The duct blower performs the same function, but is attached to the ducting in the house. The infrared camera helps detect air leakage in the walls and the heat losses too.

For more information about electrical audits and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

Solar energy may seem like the fuel of the future, but in many ways it’s already here. The sun currently powers a wide range of devices, including satellites and traffic lights, but that doesn’t mean it’s out of reach for the typical person. Mr. Electric is here to help you power your tomorrow with some practical and affordable solar solutions for your home.

If you’re looking to start small, there are many simple solar-powered inventions that can make your life easier. XD Design’s solar powered phone charger sticks to a car, home, or office window and can charge your electronic devices anywhere there’s sunlight.

Some companies have gone even further and incorporated solar panels into everyday objects, making them self-sufficient energy savers. BirkSun’s solar powered backpack can charge phones, laptops, and other small electronics when you are camping or hiking, or even if you just don’t have access to an outlet.

Every day, companies are coming up with new innovations to help bring this promising renewable energy source closer to the reach of the general public. While a lot of the smaller solar inventions are useful, more experimental projects, like the world’s largest solar powered boat, are showing that solar power isn’t just limited to smaller devices. These innovations making it more obvious that solar power is a viable energy source for the future. If you’re looking to decrease your carbon footprint, there are many ways to do it without making the commitment to power your whole home with solar energy. Consider installing a solar powered water heater or air conditioner, which can decrease the amount of energy your family uses daily. If you are interested in relying completely on solar power, do your research. While it is true that solar cells require a significant upfront payment, they also have great benefits and will decrease your electricity bill in the long run. The government also offers tax breaks for homeowners who use solar power, which can make the switch even more profitable for you. Contact your local Mr. Electric about to see what kind of solar initiatives they are taking and the types of solar energy systems available to install in your home.

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers