Many people have heard about power factor correction, but aren’t too sure about exactly what it means, or is. Here is some basic information about it, in very simple words. Power factor is essentially a measurement of the effectiveness with which your commercial business uses the energy that’s supplied to your location.

In an industrial setting, you are able to reduce the amount you pay as a power bill, by cutting down the power factor surcharges that show up on various electricity accounts; these show up as the peak demand charges from your power company. This is exactly the reason why there is such a huge growth in power factor correction.

Currently, many businesses are being charged via a kVA tariff, rather than a kilowatt one. This also means there is a distinct possibility that your electricity service provider is charging you for power they are supplying to you and which you aren’t really using. In short, you end up paying for power that’s going waste. The other considerations:

Every industrial setup has different power requirements, different types of equipment and tools that run on electricity; and it’s important that you connect with a company that is able to understand your requirements and provides custom solutions. Once they help set up the right kind of power correction equipment, you can benefit in a number of ways.

As a business owner, you know you want to reduce operational costs and while you are sure to have a number of other measures in place, understanding how power factor correction will help you, is one way of making a significant change. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of power factor installation solutions. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!