A common concern for those involved in home renovations or purchasing a new home is, “What is the state of the electrical system in the walls”. Some homes may not have had construction or renovations done since the original – this means the original wiring is still in place. Having original wiring in place can be concerning, especially if it is aluminum wiring. This type of wiring is commonly found in older homes and can be very dangerous. Read on to find out what you need to know about aluminum wiring and the dangers associated with it.

In the 1950’s to 1970’s, many homes were being outfitted with aluminum wiring. The reason for this was because the prices of copper (material normally used for electrical wires) had increased and the use of aluminum would undercut the high costs. Aluminum is also much more conductive than copper and was used in larger industrial/commercial electrical lines like power grids and airplanes.

Despite the reduced cost and increased conductivity, aluminum wiring has many potential issues. Aluminum wiring is much softer than standard copper wiring. This means that it is vulnerable to being broken, cut, and damaged which can leave live electrical wires exposed. Another issue is that when aluminum rusts, it is not as conductive as copper. Copper that rusts can remain conductive and continue its flow of power. However with aluminum wiring, rust in wiring will impede the flow of electricity and can cause a number of other issues. Aluminum also expands and contracts when it becomes hot. This constant flux in size will result in the wires loosening themselves and connections become loose. For all of the above listed reasons, aluminum is prone to overheating and electrical fires.

If you are unsure if there is aluminum wiring in your home, we have listed a number of warning signs that can indicate a hidden problem

Eric Lebersfeld and his dedicated Capitol Lighting team have expanded their reach and literally broadened the horizon toward “Making Lives Brighter.”  Together, they have enriched the lives of many and remain gratefully committed to their work with Habitat for Humanity.

Most recently, Habitat for Humanity Palm Beach County honored Lebersfeld at their gala celebration for his outstanding service and commitment.  Lebersfeld and the Capitol Lighting team remain faithful supporters of Habitat for Humanity and look forward to continuing the relationship and investing their resources in this noble organization.

Capitol contributions to Habitat for Humanity include:

•Donating over $100,000 in cash and products just this year.

•Investing their time and supporting the cause for almost 10 years.

•Developing the Making Lives Brighter Campaign with partner and spokesperson Rob-Van-Winkle, aka Vanilla Ice, to better serve the community and expand gift-giving capabilities.

• Bringing comfort to inhabitants, Capitol Lighting collects old lighting fixtures to be donated to Habitat and then offers donors a 10% discount towards new lighting purchases.

Members of the Capitol Lighting family enjoyed an evening of celebration and an awe-inspiring acknowledgement of their efforts on behalf of Habitat for Humanity.

For his work over the past 10 years, Habitat for Humanity Palm Beach County appointed Lebersfeld as an honoree.

Here are some excerpts from Lebersfeld’s speech at Habitat for Humanity’s Gala Celebration:

October 5, 2013

“So, how did it come to be that a little Jewish boy from New Jersey who sells lights for a living ends up being honored by a big international Christian Ministry that builds houses? “

Lebersfeld credits his parents, who taught him by their example to live his life in a certain way, to see what connects us as human beings, rather than what divides us:

“If one elevates their thinking just a little bit, we come to realize that the small differences between us are easily dwarfed by the commonalities we all share. 
The quality of a person is not made up by whom they know, what they have or how they look, but by who they are, what they create and how they can add to the lives of others.”

Lebersfeld went on to impart some of the history behind Capitol Lighting, a family-owned business that began in 1924 with his great-grandparents:

“Together, they started Capitol Lighting and began our mission to make lives brighter. 
They did this literally and figuratively. For almost 90 years, Capitol Lighting has been on a quest of making the lives of our customers, our communities, our vendors and most importantly, our employees – brighter”.

“Habitat’s stated mission is that of “building hope with homes”. Their organization is filled with dedicated and passionate people striving to provide deserving and hard working families with an incredible gift. They also have provided me personally and every member of my team who has worked on a habitat project the gift of allowing us to do a mitzvah – a good deed”.

“Our goals are aligned and Capitol’s and Habitat’s working together makes all the sense in world”.

Lebersfeld acknowledged with gratitude Capitol Lighting’s spokesperson, Rob Van Winkle, also known as Vanilla Ice, for boosting the Making Lives Brighter campaign and helping Capitol to donate well over $100,000 to Habitat.

He concluded his remarks by whole-heartedly thanking Habitat for Humanity for allowing Capitol Lighting the opportunity to support their good work: “It allows us to fulfill our mission while helping you fulfill yours”.

Lebersfeld also vowed his continued support for Habitat for Humanity, as he thanked Mike Campbell, director of Habitat, and Ana Vento of Vento Designs for making the evening such a success.

With a hot, dry summer predicted for this year, it is going to take a little creativity to stay cool without the luxury of endless amounts of water and electricity. You are going to need to do everything you can to stay cool, without relying on a swamp cooler or your air conditioner. There is a possibility scheduled blackouts will be performed to try and conserve resources. You can still stay cool by doing the following things recommended by your Glendale Electrician. If you have any more questions, you can give the team a The Electric Connection a call.

1-Keep the blinds closed. You may feel like you are living in a cave, but caves are cool. You need to do what you can to block the sun from heating up the home. Investing in heavy, sun-blocking curtains is also an option.

2-Consider having any south facing windows tinted. This can give you the openness you like, while still blocking the heat from the sun. Tinted windows are becoming more and more popular as people look for ways to save on cooling costs.

3-Have a ceiling fan installed by an electrician in Glendale in your bedroom and main sitting areas. This can help you feel much more comfortable. The cool breeze stirred up by the fan will go a long way to keeping you cool.

4-Don’t run the dryer during the day. Only dry clothes in the early morning hours or late night hours.

5-Avoid cooking with the oven if you can. Consider cooking outdoors on the barbecue or using the microwave. A crockpot is another, much cooler option.

You can stay cool, without running up your electric bill or soaking in a tub of cold water. If you need a ceiling fan installed, call your electrician. Glendale residents can count on the professional team at The Electric Connection to take care of their ceiling fan installation needs.

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers