By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.

When homeowners think about licensed and bonded electricians, they mainly think about them in terms of fixing broken outlets in the bathroom or kitchen. Sometimes they know they need a pro for landscape lighting needs. But there are a multitude of jobs that residential electrical repair services perform.

Moving to a new home?

What you say you are moving to a new home it doesn’t always mean you’re are moving into a recently built home. Many, many people like to purchase older homes and put their own personal marks on them. Usually this means updating the kitchens and baths. A plain kitchen it turned into a chef’s kitchen with all the updated appliances. Will the electrical panel be able to handle the current for all these appliances?

Luxurious master baths are now the norm with the look and feel of an expensive spa. Along with the spa comes the jetted tub. Can the prevailing electricity run the current needed for the tub? Oftentimes the panel needs an addition to accommodate the tub jets working while other appliances are in use.

Remaining in your current home?

If you are staying where you are, you still may be thinking about making updates. The same situations apply to you. So many people like to watch the television programs about flipping homes and those about modifying homes to sell or to live in. It is not a surprise to the slippers or the construction crews when they tell their hosts that a totally new electrical panel needs to be installed or that the whole house needs rewiring. The only way you will know if you have these issues is to have your electrical system inspected by a licensed electrician.

Has your cooktop or range exhaust stopped working on your electric range? It’s time to call in an electrician. Maybe your ceiling fan has quit working and you are waiting to purchase a new one. Have you had an electrician look at it to determine the problem? He may be able to repair it and save you from buying a new one.

Want to protect you and your family with outdoor lights that come on when someone walks past your windows or doors? Your local electrician can handle that job for you. Are you considering a new hybrid car that runs on electricity? You will need a licensed electrician to install your charging station.

Trust your electrician

One you have used a bonded and insured electrician you trust, he can be your friend for life. He may even become a member of the family. When you are having electrical problems or you want to add services, he will look at the situation 360 degrees. He will view it from all angles. He knows you and your family. He will make recommendations – sometimes there will be several options. Ultimately it is your decision.

The bottom line is that you want to keep your family safe. You also want your most expensive investment to be in perfect working order.

A frayed refrigerator plug can easily be classified as a very serious risk, both to the fridge itself, and to your entire home. Frayed, ripped, or otherwise damaged cords are a potential source of electrical fire, arcing and power failure. So, what do you do when you discover a frayed plug on your appliances?

Put simply, get it repaired! Often, replacements are available, but are very costly, and occasionally entirely unavailable depending on the age and model of your fridge.

We never endorse “Do It Yourself” solutions to any electrical issues, as electricity is fickle and extremely dangerous. A wrong move can cost you more than a busted appliance, it can cost you your health (or some serious money in fire damage repair to your home). Leave electrical work to Kolb Electric electricians! That said, we do believe in informed consumers, and thus have detailed our professional process for frayed or damaged plug repair.

Too often we encounter electrical incidents at home that could have been avoided with proper precaution and a timely replacement or repair. Don’t allow your home to harbor risks by leaving damaged plugs alone! Leaving damage untreated can lead to:

To address frayed, or damaged plugs we:

Be ready for any eventuality with our electrical repair services! Contact our experts today to learn more about our electrical services, or to schedule an appointment.

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers

There has been a sea change in electrical safety systems for residential and commercial properties and these systems are significantly safer than the ones that existed even up until 5 years ago. Even if you have new installations on your property, you need to make some effort to prevent electrical accidents.

This means you have to ensure that the electrical infrastructure in your home is of a high-grade and that it’s well-maintained. It’s also important to make smart choices with reference to using various heat-producing appliances and extension cords. Here are some tips that will help make your home a safer space:

Electrical safety is about ensuring that every fixture, fitting and installation is updated and in a good condition. The power points are one of the most important electrical components on your property. Since these are the ones you come in contact with very regularly, they do become worn and damaged sooner than the other parts of the system.