Temperatures are falling rapidly, and some regions of the country have already seen snow. With winter settling in, renters and homeowners are cranking up their thermostats to stay warm and cozy while bracing themselves for a big bump in utility bills due to heating costs. Savvy consumers looking for a way to save money without sacrificing comfort might ask: Can I cut down on my winter heating budget if I lower the thermostat and make up the difference with an electric space heater?

Fuel Matters

Savings are possible, though, no matter what kind of central heat you have. According to Grist magazine, if you are using a space heater for less than one half to one third of your living space, and you lower the temperature on your thermostat for the rest of it, you can save money even if your main heater is an efficient gas model. So if your family spends most of its winter indoor time in just a few rooms of the house, go ahead and experiment with a portable heater and see if you can reduce your bills.

For even more savings, don't forget to take other steps to winterize your home, like sealing any drafty areas and hanging heavy curtains. Wear a sweater, too, so you can minimize the amount of time you need the extra boost in warmth from your heater.

Finally, avoid kerosene heaters if at all possible. They pose a greater fire hazard than electric models and can affect your indoor air quality. If they are your only option, take extra care to comply with the safety instructions. Only refuel outside and be sure the indoor space where it is used is properly ventilated. Some kerosene heaters are even illegal in certain areas, so be sure to check your local laws before you buy.

The federal Energy Star program does not rate portable heaters, but the Energy Department does provide more information about specific types of space heaters.

Your local Mister Sparky® electrician is always available to help with advice on choosing and using your space heater safely.

The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.

Air flow is obviously a very big part of forced air systems. Without air flow, the entire system doesn’t work. It’s just producing heat and not sending it anywhere. It is precisely that issue that can cause a great deal of damage to your heating system. There are a couple of different ways that your heating system can be prevented from circulating air, but we’re going to focus on one: the air filter. Let’s take a look at what the air filter does, and how it can create air flow issues that lead to call FB Electrical Services. We provide heating repair throughout Boston.