People opt for an electric panel upgrade for many reasons, many of them linked to the increasing electrical demands of modern households. In today’s world, we need more power than ever as the devices we use become more sophisticated. With the growing importance of the technology around us, having an electrical panel that can support it all is critical. Beyond maintaining the standards of living we desire for ourselves and our loved ones, an electric panel upgrade is also necessary when it comes to safety.

Here in the MD/DC/VA area, it’s not uncommon for us to lose power when a summer storm rips through. And while these outages sometimes last only a few hours, storms that have occurred over the past several summers have left people in the dark for several days at a time. At Kolb Electric, we’re big fans of Generac generators—they are among the most reliable systems available, and they’re the only ones we install. That said, there are a few things you should consider if you’re thinking about installing a standby generator:

You can’t stretch the amount of power that generators supply, so make sure you receive an NEC (National Electric Code) approved load calculation with each proposal. Kolb Electric will provide this calculation with our estimate.

Standby generators must be permitted prior to installation and inspected following installation. Kolb Electric will do the work of acquiring the necessary permits for you, and we want to remind everyone not to have your system installed by a contractor who says they can do it with no permit. HOA requirements and approval processes vary, but key concerns often come down to noise and location.

In the event that your standby generator installation does not require a permit, make sure to ask if it will be installed up to NEC code.

Some people install generators to keep the essential functions of their home running, such as the refrigerator and a few lights. Others install theirs to be able to carry on with life as if nothing had happened. Before you install a standby generator, decide what you’ll want to run and what you can do without. Remember—too much capacity will needlessly inflate the cost of your system, so try to be realistic when deciding.

At Kolb Electric, we’re committed to installing your generator efficiently and effectively. Even so, the generator installation process can get hung up at different phases, such as permitting, and may take up to a few weeks to complete—especially during the busy summer months. Don’t wait until a major storm has been forecast before you install your standby generator! Try to do it during the spring or fall, before you need it (and, more importantly, before everyone else needs it!).

What type of generator will you be installing? Air cooled or liquid cooled? Is it natural gas or propane? Will you be receiving a gas meter upgrade? At Kolb Electric, we’ll talk you through your options and help make sure your standby generator does everything you need it to.

Whenever you have any sort of electrical work done, you’re not just buying the system—you’re also buying the company doing the install. With this in mind, it’s important that you know their qualifications as well as those of the technicians who will be installing your generator. Ask the following questions:

Kolb Electric has been in business since 1925, and all of our staff is licensed and trained to install Generac generators.

Standby generators require on-going annual maintenance, which Kolb Electric will provide with a service agreement. Make sure you also register your Generac generator with the manufacturer for warranty claims.

The lowest bid may sound appealing, but the deepest discounts won’t offset the costs of correcting an improper installation. When you see a huge price difference from one company to the rest, you can be sure something is being left out: load calculations, size inspections, and gas meter upgradesare just some of the areas where some unscrupulous contractors may cut corners and leave you up the creek when the big one hits.

Standby generators are designed to protect your biggest investment: your home. Take the time to get accurate answers regarding your system to keep your family safe.

If you’re thinking about installing a Generac generator in your home, call Kolb Electric today!

With the arrival of spring and the inviting weather it brings, you may want to spend more time outside, especially after having been cooped up all winter long. While it’s not yet warm enough to jump in the pool, there are numerous other ways to enjoy a pleasant evening with friends and family in your back or front yard. Without the proper outdoor lighting, though, come nightfall all the fun will have to stop. Because of your limited sight, you run the risk of hurting yourself and others. Whether you’re barbecuing, roasting marshmallows, watching your kids jump on the trampoline, or gazing up at a meteor shower, make sure you have the right lighting to maximize your experience! Check out these __ reasons to install adequate outdoor lighting.

Before you install lighting, consider how you use your outdoor space. For example, if you have a patio, deck or pool area, consider installing zoned lighting, which highlights a designated area. You’ll also want to illuminate areas such as your driveway, garage, sidewalk and entry way. All of these areas are important to light to ensure safe navigation and prevent a trip to the emergency room. Without proper lighting, one could trip over a hidden step, fall off the deck or worse – overcook the meat!

The more light the better. By installing the right fixtures in the right locations, you’ll eliminate all the scary spaces, increasing safety and peace of mind, not to mention guests will be able to find your house with ease. Illuminating your outdoor spaces will allow you to get the most of your day, and since the weather is only going to get warmer from here on out, we have a feeling you’ll want to be outside as much as you can!

When you add flood lights to your back patio, deck or front lawn, you’ll be able take full advantage of these spaces. Instead of having to go inside when dusk comes, you’ll be able to relax with your friends and family outside for as long as you like.  You could even enjoy a nice dinner around the patio table.

A well-lit yard and landscape deters unwanted guests from coming onto your property.  There are numerous types of lights you can install to increase home security:

Many homeowners make the mistake of adding security lights to the front of the home while ignoring the back. The back of your home can be one of the most vulnerable places because of fencing, so make sure you install lighting in this area as well. When deciding where to install your outdoor lighting, determine the darkest areas of your home as well as any places where an intruder could enter.

Your home is one of your most prized possessions. When you’ve spent countless hours perfecting the exterior of your home as well as your lawn and garden, why allow it to go unseen when nighttime comes? You can highlight the best features of your home by installing uplights, garden lighting and low voltage exterior lighting around your trees and shrubs. Not only will the perfect lights add appeal to your home, it will add an undeniable sense of warmth too. Friends, neighbors and passersby won’t be able to stop themselves from glancing at your home each time they walk or drive by it.

While you’re gathering information to find the right electrician in Burbank CA, pay attention to how the electrician acts and makes you feel. If you meet with the electrician, keep your eyes open, too.

Do you like the Burbank electrician?

Do you feel comfortable and not under pressure?

Does the electrician inspire your trust?

Do the electrician and company employees seem to know what they’re doing?

Do they seem to operate legally and behave ethically? Are they acting the way that you would want them to act towards you?

Do they return phone calls promptly?

Are they timely when meeting you for appointments?

Do they listen to your questions and concerns and answer them in a way that is forthcoming and that you can understand?

Does the electrician dress neatly and have a vehicle and tools that look well-maintained?

Electricians who are bidding jobs are on their best behavior. If you already notice that an electrician treats you or others in ways that concern you, better to find another with whom you feel more comfortable.

Check It Out

If you haven’t already, check customer reviews. The first section of this article gives details.

Enter the Contractor’s License Number into the Contractor’s License Board website for your state. See if there are any “black marks.”

Check the company’s rating at the Better Business Bureau. Ratings run from A+ to F based on customer complaints made to the Bureau. As a note, an “A” reflects the same level of customer satisfaction as an “A+.” The “A+” is earned by an “A” contractor becoming a paying member of the Better Business Bureau, which supports the Bureau in its work.

Call References

Don’t hesitate to call references. Customers are usually happy to give a good recommendation to help a deserving electrical contractor. You can return the favor later should a homeowner call you. Ask:

How did your job go?

Was your job done right the first time?

If a return visit was needed, was the electrician easy to work with and prompt?

Was company pricing competitive?

Was the electrician within budget and schedule?

Would you be happy to continue to use this electrical company?

Speak with at least three references. Listen carefully for enthusiasm or lack of enthusiasm about the electrician. Clients, past or present, may not feel comfortable saying anything negative. If they express little enthusiasm or say something negative, take this into consideration when making your decision.

A Final Tip: Don’t Automatically Choose the Low Bid

A bid may be too low. How can that be? An electrician may intentionally omit items that the job requires, only to come back later saying that additional work needs to be done. On the other hand, some electricians may unintentionally bid low through inexperience. Either way, the electrician may ask for more money to finish the job or may leave you with an incomplete project.

Price is important, but judge the entire picture an electrician is showing you — character, expertise, the ease of working with him or her, and overall value. A large part of an electrician’s value is that he/she gets the job done right and safely without taking too much of your time and inconveniencing you. A very competent electrician can save you money by suggesting more efficient ways to do a job or to save on electricity. When you enjoy a good relationship with your Burbank electrician, it can save you both time and money.

The United States has three main power grids: The Eastern and Western Interconnection, which each service multiple states, and Texas, which gets an independent power grid. The Electric Reliability Council of Texas, or ERCOT, handles 85 percent of the state’s power needs, producing and distributing electricity to 23 million people.

But, why does Texas need its own grid?

Slate reports that during World War II, Texas was home to many factories required for critical supplies. The electrical planners didn’t want to depend on energy coming in from other states, so they used the abundant natural resources to set up a grid specifically for Texas. Even today, this state requires a massive amount of electricity to keep the industrial sector powered, so it makes sense to have a dedicated grid.

Texas has a strong culture of self-sufficiency, which had an influence on the development of its own energy grid. It does have links to the other interconnections, which get used during particularly high demand periods. Unusually hot summers or long heat waves can sometimes lead to Texas importing energy, so the air conditioners keep going strong.

The utility companies governed by the ERCOT typically do not sell energy outside state lines. This configuration allows Texas to set most of its own rules and regulations, as opposed to the Federal Energy Regulatory Commission setting oversight in place. State regulators can make decisions that make the most sense for their residents, rather than making adjustments based on the needs of multiple states.

Texas has the space and natural resources needed to produce inexpensive electricity for residents and businesses. These costs fall below the national average. Renewable energy sources, such as wind-powered electricity, are moving Texas to more environmentally friendly options.

However, inexpensive energy does have a downside. Population growth in Austin is significant, thanks to startups, tech companies and other businesses moving into the area. Google Fiber also plays a role in bringing in more people. The energy grid needs to adapt to the rising amount of individuals who call Texas home, but electricity companies have less of an incentive to build in Texas compared to states with higher energy costs.

Contact Bryant Electric Service to make sure you’re getting the most out of the Texas Power grid and take back your energy today!