Christmas is just around the corner, and many families are decorating their homes. During the holiday season, when the sun sets early, decorative lights along the streets and homes can bring a sense of warmth during the cold and dark evenings. When decorating your home, take extra precautions so that your lighting installation is safe from electrical hazards.

Ensure light bulbs don’t come in contact with flammable items (i.e. paper, cloth). Over time bulbs can generate heat and transfer this heat into nearby material that can lead to a fire. Although decorations look beautiful lying atop Christmas cloth, keep an eye on them if the lights are to be left on for a significant amount of time.

With this same issue in mind, don’t leave any lights unattended in the home. If you are leaving a room for an extended period of time, unplug the lights. Should a fire start, and no one is nearby to address it quickly, you could risk losing more than just a Christmas tree.

When hanging your lights do not use nails or staples that can penetrate the wires. If the protecting rubber and plastic is pierced, the exposed wires can lead to an electrical fire. The heat from the wires can heat up surrounding material and moisture exposure can cause sparks.

Ensure your lights are rated for outdoor use should they be used on the outside of your home. Some lights tend to be more delicate and not weatherproofed and are intended for indoor use only. Should it rain or snow, you may find it necessary to replace all the lights on the exterior of your home.

Once the holiday season has come to an end, take down the lights. Christmas decorations and lights are not designed to be exposed to the elements 365 days a year. After an extended period of harsh weather and temperature fluctuations, wires can deteriorate. This means that you could risk an electrical fire if you do not replace the lights. Saving time and effort by leaving your lights up year-long can cost you money.

When connecting strands of lights, check each connection carefully so that it is tight and secure. The connection prongs can become exposed during wind gusts. If they are already exposed you can risk experiencing electrical surges when exposed elements come in contact with the elements.

You also want to avoid overloading power outlets and extension cords. Too many strands attached to the same extension cord, or chained extension cords can be dangerous. A good rule of thumb is to limit the strand length to no more than three chains of lights.

The Christmas season can be warm and inviting, but without the proper precautions you can risk losing more than just a few presents under the tree. Take some extra time when decorating this season to ensure that your family and home are protected. For more information or for a help from a licensed electrician, contact your local Expert Electric at 604-681-8338.

Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

The world is getting more connected, and machines are collecting massive amounts of data about consumer habits. In the energy sector, the rise of big data is poised to revolutionize the way utility companies provide electricity to homeowners. That's good news for you – the more information you have at hand, the more opportunities you’ll have to save money. Read on to find out how big data may affect you in the near future.

Machines Learning the Patterns

Analyzing the patterns inside the enormous amounts of information provided by big data is known as machine learning. By letting computers do the heavy lifting, analysts can discover trends and efficiencies that no one would ever think to look for. Ultimately, what we learn from data analysis will trickle down and impact your interactions with any appliance or device that is electrical. Work conducted by machines will show humans the best way to move forward.

IntelligentUtility.com recently listed seven ways that machine learning can affect the relationship between you and your utility provider:

In the meantime, if you need tips about how to save energy or need electrical work performed on your home, call a qualified electrician today.