Whether you have purchased land and are looking forward to having your own home built or live in a home that you want to give a complete renovation, your project is going to be a big one. There are so many factors that go into the building of a home, it can be a bit overwhelming. The key to remember is that it should all be left to trained and certified contractors. There is a great deal of planning that is involved in the construction of a home, even if it is a fairly straightforward renovation or addition. It is important that an electrician in Glendale is included in the planning process from the very beginning. The team at The Electric Connection has a great deal of experience with new construction and can provide valuable input.

If the project you are working on is a bit more of a do-it-yourself job, it is absolutely crucial you do not attempt to do the electrical yourself. There are not only laws and regulations that must be adhered to, it just isn’t safe for you or the construction project. When you hire a Glendale electrician to complete the wiring and fixture installation, you can rest assured it is done right. You know you will pass the inspection that must be done to follow code and you will know it is safe.

Some people assume they can skip the hiring of certain contractors, including the electrician. Glendale property owners need to think long-term. The risk of an electrical hazard or a fire starting because of faulty wiring is far too great. Budget the expense of an experienced electrician into the construction cost and save yourself a lot of hassle and worry. The team at The Electric Connection is standing by to help you with your next big project.

It is better to be prepared for a power outage than to have to scramble when one actually happens. Having a drawer, a small space in a cupboard or even a rubber tote filled with the supplies you will need when the power goes out is a good idea. Your Beverly Hills electrician suggests you keep at least one flashlight and some backup batteries, a battery-powered radio, matches and some emergency candles along with sturdy candleholders in your kit. These are just a few things you will need to get you through an outage. You can call The Electric Connection to learn about some other things you may want to keep in your kit.

Once the power goes out, you will want to grab your kit, especially if darkness is falling or it is already dark. If it is daylight, you can take care of these things without needing any light. As soon as the power goes out, you want to go about protecting your sensitive electric equipment. Smart TVs, computers, laptops and so on are very sensitive to electric surges. They need to be unplugged from the wall until after the power comes on and seems to be staying on. Don’t rush right over and start plugging stuff in the second you see the lights come on. It is not uncommon to have the power hiccup a few times before there is a steady stream.

You will also want to turn off any appliances and lights that may have been at the time of the outage. This will help cut down on a surge coming into your home and potentially causing serious damage. If this does happen, you will need to call your electrician. Beverly Hills residents can call The Electric Connection if there have been any side effects from a power outage.

As a business owner, it is important to reduce your energy emissions as much as possible. You can easily make a conscious effort to do this by reducing packaging, using sleep mode on all your electronic devices and shutting down everything at the end of the business day. Another good way to reduce your emissions and your electricity bills is to use LED fixtures in your buildings, offices, and even parking lots.

Here’s how businesses around the world are taking a step towards reducing their environmental impact using commercial LED lighting.

There are a number of reasons why LED lights make a better choice for the environment and sustainability. The lifespan of a LED bulb is up to 80,000 hours, whilst halogen bulbs are only estimated to last between 2000-6000 hours. The bulbs also gradually lose lumen output at a rate which is almost undetectable to the human eye, in comparison to a metal halide or halogen bulb which fluorescent strip lights to LED tubes, the first thing they will notice is that there is no waste disposal required. Due to the chemicals in fluorescent lights, waste disposal or Light Supplier in the UK. Leila is a Public Relations graduate from Sheffield Hallam University.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.