If you’re not prepared for them, electrical repairs can be painful. And while certain things are obvious, sometimes it can be tricky to decide whether or not you need to call an electrician. Here are eight reasons people commonly call Kolb Electric:

Your circuits constantly trip – do your lights flicker every time you run the microwave? Can you not run more than a few electronic devices at a time? This may be a sign that your circuits are overloaded and are drawing more electrical current than they can provide. A heavy up should take care of the problem.

You have power strips everywhere – don’t have enough outlets? We can take care of that! Using too many power strips can overload your electrical system and can create a fairly serious fire risk. Call Kolb Electric to install additional circuits to keep your home safe.

You’re running extension cords under your carpets – running extension cords all over the house presents a couple different hazards. Not only are they easy to trip on, but they’re also not things you should be stepping on. Kolb Electric can install additional outlets so you’ll always have power where you need it.

Your light switches feel warm to the touch – warm or hot switches, or switches that shock you, should definitely be checked out. While it could mean your circuits are just overworked, it could also be a sign of something more dangerous.

You have aluminum wiring — according to the U.S. Consumer Product Safety Commission, homes built before 1972 that have aluminum wiring are 55 times more likely to create fire hazards than homes with copper wires.

Your lights flicker — do your lights seem to flicker or dim whenever your air conditioner, washing machine, or other large electrical device turns on? If so, call Kolb Electric! Our licensed electricians will assess your home’s circuits and make improvements to prevent these problems from continuing in the future.

You own a number of expensive electronics — you may already have surge protectors to take care of your expensive desktop computer or stereo system, did you know that an electrician can install a whole-house surge protection unit to make sure that all of your electronics are safe? Consider calling an expert and feel safe and sound at home.

You’ve never upgraded — if it’s been 25 years or more since you upgraded  your home’s electrical system, then you may be living with a sub-par one. Call an electrician so he or she can help move you into the modern era with a new system that will be more accommodating to the needs of today’s world.

If you need electrical troubleshooting in Maryland, Virginia, or Washington, DC, don’t wait—call Kolb Electric today!

Can I get a Free Estimate over the phone? If you want a Free Estimate, call us at (800) 990-9490. We give Free Estimates either over the phone, or, if needed, after looking at your job. We can almost always give you a Free Estimate over the phone if your job is installing new items such as: • And all other installations of new electrical components (as opposed to repairs)

How can you give me an over-the-phone estimate for a job as big as a house rewire or an electrical panel upgrade? We’ll do a brief interview with you to find out the size of your house and some other basics. We can give you a rough estimate over the phone. Then if you want to take the next step, we can send an electrician to your home or business. He’ll look over your electrical system and give you a firm bid in writing. If the bid is acceptable, we’ll schedule the job with you.

Can you give me an over-the-phone estimate for installing a charger for an electric car? Yes, these can be as low as $200, and they go up from there. We’ll ask you the distance of your garage or carport to your electrical panel. If you’re interested, we’ll then send an electrician out to see the job. He’ll determine where the charger could go and also check that your electrical panel has sufficient power. The price of the job will depend on the distance from the electrical panel and whether your panel needs to be upgraded for more power. He can give you a firm written bid after looking at the job.

Are there times when you can’t do a Free Estimate? If you need something fixed that used to work, we’ll need to do on-site troubleshooting of your electrical system and charge for the electrician’s time. Within a half hour to an hour, we’ll know the extent of the problem. At that point, if he hasn’t already fixed the problem, the electrician can give you a firm bid in writing before doing more work. Often, by the time the electrician has figured out the problem (within a half hour to an hour or so) — let’s say it’s a loose wire — it will take another minute or so to fix it. In fact, he may not be certain that the loose wire was the entire problem until he tightens the wire, the circuit now works, and the job is done.

Why can’t you give an estimate for troubleshooting jobs? When a component in your electrical system no longer works, there can be variety of reasons, each requiring a different amount of time to fix.

Let’s say you have a swimming pool and the pool light no longer comes on. If the light switch has broken and needs replacing, we’re talking about an inexpensive part plus half an hour of labor. If the light fixture or the circuit breaker is broken, these parts are bigger expenses. If the wire feeding the light has a short circuit, that could mean digging up the wire that runs underground, cutting the concrete pool deck, replacing the wiring and its protective housing (electrical conduit), cutting a new trench and re-burying the wire, and finally, patching the concrete pool deck. That could be hundreds of dollars.

So, the symptom of the pool light not working doesn’t tell us the cost. We’ll need to troubleshoot on-site for a half hour to an hour, find the cause, and then we’ll be able to give you a firm bid price.

What is the difference between an estimate and a bid? We can give you a Free Estimate over the phone without seeing the job if your job is a new installation. If the estimate is acceptable and you want to move ahead, we’ll set an appointment with you to see the job. Once we’ve seen the job and checked out the details, we can give you a firm written bid in writing. It’s a firm price with no surprises for you.

How can I get started? Call us at (800) 990-9490 and ask for a Free Estimate.

For more about my company, The Electric Connection — all the stuff you wanted to know but were afraid to ask — click here. If you’re interested coupons for electrical work, for example, $50 off installation of a Whole House Surge Protector in the L.A. area, click on our coupon page.

Kim Hopkins, Owner The Electric Connection

Many homeowners are DIY enthusiasts and will happily fix a broken chair or repaint the living room wall if they feel it’s looking dull and drab. If you are one of those people, you may also be tempted to fix electrical issues when something goes wrong. However, it’s important to keep in view the fact that electrical jobs aren’t for the DIYer. In fact, any electrical job, big or small should be tackled only by a licensed and insured electrician.

When you are working with electricity, safety is something you should never compromise on. It’s a fact that you would be able to handle some simple electrical jobs on your own and they may seem like a breeze, but the truth is that most people aren’t aware of the precautions they should be taking while tackling anything related to electricity.

When it comes to electrical jobs, there is no alternative to hiring an experienced and skilled professional for the job. Take a look at the 6 biggest domestic electrical mistakes novices make:

This is a very common mistake that many inexperienced people make. Every installation needs a different gauge (thickness) of wire. Using the incorrect one in a particular application can result in an overload or overheating in the wire; in turn, this can cause the circuit breaker or fuse to trip. It’s crucial that the wires be rated for the actual amperage they are going to carry.

It’s crucial that you never try to make any electrical connections outside electrical boxes. The sole purpose of these boxes is to ensure that the wires should be protected from external elements. If you do have to make an extension, use a plastic/metal box. Do not shove too many wires into one electrical box- this can lead to a short circuit.

There are times when you may not fix the switches and outlets firmly in the wall. These can be dangerous. When you attempt to fit appliances into an outlet that’s loosely fitted, the wires can come out of their terminals and can get overheated.

All the connections inside a fuse box should be correctly and tightly placed. Loose connections can cause flickering in lights and appliances. At times, it can lead to overheating of circuits too. It’s never a good idea to try to fix these yourself

Circuit breakers and fuses are the safety mechanisms that protect the wire ampacity ratings; they also control the flow of electricity to all the connected appliances. Many people are under the false impression that if a fuse blows or a circuit trips, they can simply replace it; and that the problem will be solved. In actuality, when either of these things happen repeatedly, it’s an indication that there is something wrong in the wiring connected to them. Call in a licensed electrician without delay and get the problem fixed.

This is another common electrical mistake. While many people simply buy adaptors and use them to plug in multiple appliances in at a single point, this only increases the amperage that the circuit can handle. This danger is compounded if you use more than one heavy-duty appliance at a single outlet.

Never take chances when you are dealing with electrical installations or are faced with electrical issues. Always call in a certified electrician to handle the job. For any type domestic electrical installations, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263