There are different things that you may do in order to see to it that you will be making the most efficient and the best possible use of the energy that you channel into your home. There are different options that you may tap in order to determine whether you have to make certain adjustments in your home’s energy system, one of them being Princeton energy efficiency audits. If you own a house and if you still have not had this process performed in your home, then it is highly advised that you do so in order to save.

Home energy audits allow you to carefully and efficiently pinpoint the energy needs that the different pieces of equipment in your home mount up to. Going through this process will give you an idea of how much energy you really need in order to keep your household running smoothly.

By having a professional audit done, you will not only allow you to see to it that you will have ample supply of energy for the different parts of your house, but will also keep you from overshooting your expectations and supplies. Without having to say it, you will be able to efficiently channel enough energy into the different parts of your home and ensure that you will not be using up more than necessary.

There are different standardized tests that are employed in order to determine the amount of power and energy that you need to have your home equipment run effectively and efficiently. More than measuring the needs of your whole house, you may even have other tests employed for individual rooms and areas, allowing you to map out and determine the energy needs and consumption that you may expect from the different areas of your house.

When you get the time and want to save on your monthly energy bills, it will be best for you to have Princeton energy efficiency audits done. tests employed to ensure that you ware able to make the most efficient use of your home energy.

Needless to say, home energy audits are always performed by professionals. Unless you have some type of background in the electrical/ energy field, it will be impossible for you to even know how to employ the necessary tests.

Don’t worry about finding the time to test the energy using devices in your home. Drop your local electrician a line and he will most likely be willing to perform this job for your home. Princeton energy efficiency audits can save you time and money when done right.

There are many reasons and advantages of LED street lights over HPS, Metal Halide, and any other HID light used in the street lighting industry. These advantages of LED street range from cost savings, higher quality of light, and overall better efficiency.

LED is quickly becoming the “go to” light for all uses; residential, commercial, and industrial. From fully replacing and retrofitting LED is seriously becoming the majority within the world of lighting. The following list is going to cover 4 major advantages of LED street lights over HPS and Metal Halide, hopefully it shines some light on the true benefits of LED for even Metal Halide, you get results that show LEDs actually really do pay for themselves. If you use your lights often, making the switch to LED street lights may even pay themselves off within a few years.

If you’d like to see how much you could save, check out the diminishes over time. This is a highly important thing to note because with greater lumen depreciation comes added costs of maintenance.

Lighting fixtures such as HPS and Metal Halide have lumen depreciation that happens much earlier in their life and much quicker throughout the bulbs life. Whereas an LED takes a longer time to start depleting in it’s lumen output and much slower lumen depreciation than HPS and Metal Halide does.

While not all LED suppliers and manufacturers, MyLEDLightinGuide.com offers LED fixtures and retrofit kits that can produce at a very high MyLEDLightingGuide retrofit kits can run as high as 151 lumens per watt. While the typical retrofit kits on the marketplace (on average) run at only around 110 lumens per watt.

This is just a prime example of how powerful lumens per watt can be. The more lumens per watt you get, the less watts you will need to produce the same amount of light.

So, let’s compare the “average” retrofit kits compared to a Metal Halide light. Remember, the “average” retrofit kits run at around 110 lumens per watt. Compare that to a Metal Halide light that runs around (on average) 90 lumens per watt.

So just by these numbers we can start to see the power LED lights have and how they need less watts to produce the same amount of light that a HPS or Metal Halide light does.

In addition to #3 on this list, LEDs also provide a higher quality of light measure by the Color Rendering Index (CRI). Here’s two images that should do the talking:

Street Light Conversion From 400W Metal Halide to 120W LED using a LED Retrofit Kit (before)

As you can see after the 400W Metal Halide was replaced by the 120W LED fixture, the light produced is much brighter and illuminates a greater area. On top of that, it is using way less energy (400W down to 120W)!

Brighter and greater illumination can greatly increase safety and reduce crime by the simple fact of being able to see more throughout the night. Better illumination also creates safer roadways by not leaving any dark spots that may cause issues for drivers during night time driving.

ballast-compatible LED T8 tube for office lighting, school lighting, hospital lighting, basement lighting, and more. The energy-efficient F32T8 tube light can be used in direct-wire fixtures or to replace T8 tubes in fluorescent fixtures without removing ballasts. Designed to last 50,000 hours—5 times longer than fluorescent tubes—the LED T8 tube reduces costly repairs, disposal fees, and the need for replacements. This energy-efficient LED light uses just 18 watts of power and is comparable to a 32-watt fluorescent tube light.