Do you have a smart phone? What about a smart watch? Tablet? Laptop computer? Backup battery? Each of these devices needs frequent charging, which means the charger will take up a precious electrical outlet somewhere in your home for hours at a time, and could prevent you from having to plug in something else that you may need. What’s worse, what happens when you lose your charger and are left with nothing more than a typical USB cable? You can’t plug that into the wall, so what good will it do?

Well, that’s not exactly true anymore. In recent years, because the USB platform has become so popular for smartphone and other device charging, electrical component companies have begun to make wall sockets with USB plugs already built in! These combo outlets give you the best of both worlds, allowing you to plug in your devices with a regular USB cable while keeping your electrical sockets open for additional plugs.

A USB combo outlet is remarkably simple, and can be retrofitted to fit nearly any already-existing outlet. Essentially the two electrical outlets are exactly the same, but they also have two USB outlets squished right in between them. When the electricity is fed to the outlet, it also feeds directly into a step-down circuit, which brings the voltage down from 110 volts to about five, which is the standard for that particular plug technology.

The other benefit is you don’t have to worry about a large or bulky charger potentially blocking up the other outlet. While most manufacturers have gotten pretty good about keeping their wall chargers small, some larger units can take up a big chunk of space on your wall, potentially hindering access to the other charging unit. Getting rid of these units entirely and charging off a USB port keeps both plugs free and open for other uses.

Think something like this would be far too expensive? Think again. The average cost of a USB wall socket is generally anywhere between $10 and $25 each, making them remarkably cost-effective. When you consider you don’t usually need any more than three to four of these outlets, you can make this switch for at most about $100.

That is, provided your home can support these new devices. A wall outlet sits inside a small metal case that’s mounted inside your wall, known as a junction box. Most modern junction boxes are fairly large, and upgrading to these new outlets isn’t a big issue. But some older homes were built with smaller junction boxes that won’t be able to fit the increased size of a USB outlet, which is normally roughly twice as deep as a traditional standard outlet.

With summer weather driving you indoors where it is much cooler, you may be looking around the house and thinking you could change this or that to make it all a little better. Home remodels range from very minimal renovations to big changes that may include adding a room or completely removing walls. All of this will make your home a little more perfect for you and your family, but home remodels can be a lot of work. While small renovations are typically something the average homeowner will attempt to do on their own, an electrician in Santa Monica points out that even the smallest changes should be evaluated by an electrician. You can count on the team at The Electric Connection to send out an experienced electrician to handle the inspection for you.

When you hire a Santa Monica electrician to inspect the area you plan to remodel, you will get a good idea of the electrical work that is involved in the remodel. Often times, homeowners forget all about the electrical wiring that is needed with any renovation. During the inspection, you will be told what all is hiding behind the walls and what would need to happen to move the wiring. Things to consider are light fixtures, outlets and data lines. If you are planning on adding more outlets, your electrician will need to evaluate whether or not you have enough room in the breaker panel to do so.

Another important part of the inspection will be to determine the condition and age of your existing wiring. This is always a job for an electrician. Santa Monica homeowners who live in homes that are more than 30 years old will appreciate the information. Outdated wiring could be a fire hazard. Upgrading the wiring will make your home safer while potentially saving you money on your homeowner’s insurance. Give The Electric Connection a call today and schedule your home inspection before you move forward with any remodeling plans.

There’s no question that LED lights are the best option for fleet vehicles—or any vehicle for that matter. They consume 90 percent less energy than incandescent bulbs and last about 42 times longer. Because fleet vehicles are constantly in motion, long-lasting LED lights can be of extreme benefit to trucking companies. A longer life span means dramatically lower maintenance and replacement costs as well as a reduction in downtime.

We have LED lights for Peterbilt, Kenworth, Freightliner, Volvo, International, Mack, and Western Star trucks as well as box trucks, tow trucks, dump trucks, and more. Options include LED tail lights, LED brake lights, LED marker lights, LED reverse lights, and LED clearance lights. These truck lights are available in a wide variety of styles, shapes, sizes, intensities, and connector types. Take a look through the categories below to see some of what’s available, and visit the links for complete product lists.

All of our LED truck lights meet DMV FMVSS 108 requirements and are protected by a lifetime warranty to guard against manufacturer defects and malfunctions. Mounting accessories are available under the accessories tab on each product page.

Options include multi-function combo boxes. Rear combination lights can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, trailers, and flatbed trucks. The all-in-one lamps can be used as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. Light heads can be rearranged for customized positioning.

Multi-function combo box lights have red and white LEDs and can be used as rear reflex reflectors, turn signal lights, hazard warning lights, reverse lights or backup lights, brake lights, and tail lights. Separate LEDs are positioned on the bottom of the box for license plate illumination.

We all want our families to be safe at home, and there are many products to help us feel safe. While some homeowners still use traditional deterrence methods like fences, bars, and “Beware of dog” signs, there are proactive and responsive electronic security systems being used today that can be much more effective. However, as with every electronic system, improper installation or malfunctions could make them a nuisance or even inoperable, leaving your home and family vulnerable.

Motion sensors seem to be especially problematic. When they are working improperly, they can add unnecessary costs to your electric bill and disrupt your sleep and peace of mind. But there is a lot that you can do before you call an electrician.

First, make sure you read the instructions carefully. Even if you’ve installed motion sensors before, you will need to take into account the specific specifications of the one you’re installing or troubleshooting. In addition, here are some tips that may solve the issue: