Businesses as we all know, are always thinking about the bottom line. From ways to increase revenues to ways to decrease expenses, it’s all critical stuff for any company to pay attention to.

That’s exactly why we are creating this post on energy saving tips for businesses and companies alike. And while not every business in every building will be able to implement every single tip on this list, there should be numerous ones that will be highly relevant to your business.

Saving energy will allow you to reduce overhead expenses, enhance your public view as a “going green” company (which you could use as a marketing play), or even just have better piece of mind knowing your buildings are just that much greener.

Without further ado, here is the first on the list (out of 25)…

1. Upgrade to a LED lighting system. The benefits of LED technology far surpass any other lighting technology commonly used in buildings or fluorescent, metal halide, HPS, etc). reducing the amount of energy that is going to power those lights as well.

4. Install sky lights. How about all of that natural light that is going to waste otherwise? By installing sky lights in areas where natural lighting would otherwise not get to (e.g hallways and inner rooms), you open yourself up to some huge savings by not having to have nearly as many lights on during the daytime.

5. Switch to green web hosting. This is a huge one for those companies who have lots of traffic and do a lot of business through their website. spam email has a carbon footprint? Although this won’t save your company any money, it will definitely reduce the carbon footprint associated with your company.

14. Only purchase ENERGY STAR equipment. By purchasing office equipment that is ENERGY STAR qualified, you are buying into products that are proven to be more energy efficient than those that aren’t.

15. Switch over to laptops. Desktops are always plugged in, and that can mean a lot of energy consumption. By switching to laptops, you will use 1/4th the energy associated with powering your computers.

16. Update your insulation. Those nasty drafts aren’t only uncomfortable to your employees and / or visitors, but they are also wasting a lot of energy. If you can, consider updating your insulation to stop the escape of that warm (or cold) air you are paying to output.

17. Update your windows. While you are at it, updating your windows to ones that don’t have any leaks in them will stop those drafts too. Both of these go hand in hand, and together will reduce a lot of temperature control going to waste.

18. Hold a virtual meeting. If you have days designated for meetings and not much else, then why power your entire building (and make everyone drive) if you could easily have everyone stay at home? Your employees will probably appreciate it, and you are going to save a lot of energy for that day. Technology these days makes it a whole lot easier to save on energy for business and buildings alike.

19. Take advantage of tax credits. All of this effort on saving energy will not only save you in overhead costs, but it could also phantom load is basically energy that is being consumed through a product that is entirely off. The simple solution is to unplug everything when it is not in use. Alternatively, you could shut off the power to an entire room or area when it’s not in use to ensure no phantom load waste is occurring.

23. Reduce hot water usage. By installing efficient faucets, you will reduce the amount of water that is wasted. And if you do heat that water, reducing the waste of it will reduce the amount of energy you use to heat that water.

If you are looking for a place to escape from life’s every day hustle and bustle,Look for IP (Ingress Protection) rated fixtures that are waterproof, meaning dust-tight and protected against long immersion in water, rather than simply “water safe” or “wet location safe” options.  Waterproof fixtures are meant to be submerged and will prevent water from entering them due to sealed assembly.  Take the precaution to ensure that your fixtures will meet all safety and application standards for an underwater environment prior to purchase or installation.

Ingress Protection (IP) ratings specify the environmental protection the enclosure provides.

The IP rating normally has two (or three) numbers:

An “X” can used for one of the digits if there is only one class of protection, i.e. IPX1 which addresses protection against vertically falling drops of water e.g. condensation.

IP First number – Protection against Solid Objects

IP Second number – Protection against Liquids

Voltage Requirements

When weighing your options on which type of fixture to choose, cost, convenience, and the size of your project are important. If one were to complete a large project for the grounds of a grand hotel, for example, line voltage (120V) would be the ideal option as vast distances may exist between the focal point and the fixture itself.

While it’s also true that standard incandescent bulbs can be found at virtually any hardware or household goods store, in an age where environmental awareness is important to daily life, technology and the public are moving in tandem towards different solutions. Since line voltage lighting consumes much more energy and will typically require the expertise of a licensed electrician, more homeowners are choosing low voltage (12V) options. Low voltage fixtures are notably the safer and less hazardous of the two choices, are often smaller, and easier to conceal within a natural landscape. They also have the added benefit of lower cost over time. Note that a transformer is required to convert to the lower voltage for fixtures which will be used underwater. You may also make use of photocells and timers to save on electricity consumption costs even further.

Let’s take a look at some examples of the different types of submersible low voltage products available today:

Low Voltage Halogen

This LED lights consume approximately 75% less power than incandescent units for the same amount of light output. This amounts to a sizeable savings over their life span. Moreover, standard underwater LED fixtures consume about 1/5 of the power as standard incandescent bulbs!

Besides energy savings, the nature of LED production makes them ideal for underwater applications. There are no bulbs to change as LED fixtures typically come in a permanently sealed housing. Sealed construction means underwater lights may be left in a permanent location with no concerns about extra cable allowances, or making provisions to change bulbs. They should, however, be accessible in order to clean the lenses during regular pond maintenance.

Part of home ownership is the freedom to do as you choose with your home. Painting walls a wild color of orange or adding new carpet are all things homeowners do to make the home fit their personality. These are minor things that can be done on your own over a weekend or two if you like. Then there are those bigger changes homeowners are typically keen to make. Whether it is knocking out a closet to make a room bigger or adding additional square footage onto the house to accommodate a growing family, a home is constantly evolving. However, there are some jobs that require a little more expertise than your cousin’s friend. You need the help of an experienced electrician in Burbank if you are planning any major home remodels. The team at The Electric Connection are the ones to call when you are ready to change up the interior of your home with a remodel.

Adding an entire new room, transforming a basement or updating a kitchen are all common remodels families will do to make home life easier. These things also add value to the home and can be an investment for the future. To protect that investment, it is important you use a certified electrician. Burbank homeowners who try to cut corners by avoiding permits and hiring unlicensed electricians are putting themselves at a huge risk.

Remodels will almost always require new wiring, updating outlets and fixtures and a host of other electrical related job. The overall safety of the home must be considered. Stay safe, protect your investment and make the call to a trained, professional Burbank electrician. The job will be done right and you will feel better knowing the wiring is up to code and has passed inspection. Give The Electric Connection a call today and schedule your remodel consultation.