A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.

There are many projects you can take on yourself, or hire a general handyman to do, in your home. However, your commercial space or business is a whole different story. When you need work done there, you run the risk of creating a business interruption, which could be detrimental to your bottom line. Therefore, it’s essential that you only trust a professional for your commercial electrical work—no matter what the job is.

You may have a general handyman for your commercial space, or perhaps you have a local electrician you trust for your residential projects. However, what you may not have in either of these scenarios is an electrician with extensive experience and training in the commercial space. This is just one of many reasons you should make sure to hire a professional commercial electrician. Keep reading for more.

The equipment and skill involved in commercial electrical jobs will range depending on the type of commercial space we’re working on—whether it’s a restaurant or an industrial office space. No matter what your needs, however, we can handle them. Trusting electricians who are specifically trained in the commercial space is far more cost-effective than trusting any electrician off the street.

via Tooshlights.com

Ultimately, Tooshlights wants to improve the public restroom experience. “We’ve all been in a public restroom with a line out the door, and no way to tell if a stall is open, occupied or out of order without looking under the door or peeking through the crack,” Tooshlights.com