Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

Underwater lighting gives your pool a charming, romantic look at night. It also makes swimming after dark more enjoyable. Such lighting can be a big help when you’re trying to test your pool water after dark. However, changing these underwater bulbs when they burn out isn’t quite as simple as changing a household light bulb.

When you go to replace a pool light bulb, keep in mind that working with water and electricity requires special attention to safety. Be sure to switch off the electricity to the pool area, either at the breaker box or the main shut-off switch. You will need your new bulb, a lens gasket that fits your pool light fixture, both a Phillips-head and a regular screw driver, a couple of towels, and a circuit tester.

The type of bulb you need is generally written on the edge of the fixture. If this information is worn, you can measure the diameter of the existing bulb and compare that number to common replacement bulbs. It’s important that the replacement bulb be the right size to prevent water from entering the bulb fixture and shorting out the bulb.

After you have the right equipment assembled and the electricity off, it’s time to switch out the bulbs. Start by removing the bulb from its casing. Most light fixtures have a screw at the top that holds the unit together. Next, pull the bulb assembly from its casing. There should be a long enough cord so that you can set the whole thing on the deck outside of the pool while you work.

Now that you have the light out of the pool, gently remove the face ring, gasket and lens so that you can get at the bulb. Once that is done, the next part of your pool light repair is to carefully unscrew the bulb and wipe off any moisture. Clean the entire assembly gently to remove any corrosion, but don’t scrape it or the unit may not seal properly when it’s put back together.

Finally, insert the new bulb, install the new lens gasket and put everything back together. Return the light fixture to its casing and replace the set screw. Turn the electricity back on and make sure that the light is working properly.

At Kolb Electric, we want you and your family to enjoy your swimming pool—at night as well as in the daytime. If you don’t feel comfortable replacing the pool lights yourself, we’re here to help. In fact, our licensed electricians are experienced in all aspects of pool light replacement, so we can help you with any service you require. To schedule an appointment for your Maryland, Northern Virginia, or DC-area home, call us at 877 287-1179.

Businesses cannot afford an interruption in their equipment use and faulty wiring or wiring that is not adequate could ultimately cost the business money. Lighting that does not work properly is also bad for business. It reflects negatively on the establishment and could very well turn customers away. If you want to avoid lost revenue, you will need to fix any electrical issues promptly. The Electric Connection is one business who understands your needs and has the experience necessary to do commercial work.

Picking the Right Electrician for Your Commercial Job

When looking for a commercial electrician, you want to ensure your business is represented by somebody who is professional and courteous. In many cases, the electrician will be in sight of customers and may need to interact with them from time to time. You will want to pick a company whose technicians are neat and tidy. The last thing you need is an individual who is disheveled and making a mess of your space. Another important tip when it comes to choosing an electrician in Glendale is to consider your budget. It is important to get quotes about a job before you hire anybody. Contractors and electricians will have to work together and coordinate in order to get the job done according to schedule. Any electrician who will be performing work should be licensed, bonded and insured. It doesn’t hurt to check the company rating with the Better Business Bureau as well.

Wouldn’t you like to keep your hard earned money in your pocket rather than pay it out on excessive electric bills? Californians get used to mild weather, but when those cold temps blow in, they are a real shock to the system. Your first reaction is to reach for the thermostat and crank it up. Unfortunately, if your home isn’t ready to ride out a cold snap, you could be paying double or triple what you really need to be to keep your home warm. These are some tips from your local electrician in Los Angeles to help retain the heat from your furnace in the home and save you money on your electric bill. The team at The Electric Connection is here to help.

• Spend some time adding weather stripping around your doors or windows. It is sold in a roll with self-sticking tape on one side. Simply peel and stick. This one little thing can block cold drafts from coming in as well as prevent your hot air from seeping out. During the summer, you can keep your air conditioned air in and the hot air out.

• If you have sliding glass doors or French doors, consider investing in heavy curtains. Again, these are great for the summer and winter months. You can block the cold by covering large windows with heavy curtains.

• Have your furnace or heat pump maintained. Keeping filters clean and the unit in good working order can save you a lot of money in repair costs as well as keep the unit operating in prime condition.

You don’t have to pay a lot for your Los Angeles electrical bill when you do these three simple things. You can reduce your heating and cooling bills by taking care of the little things around the house. If you have any more questions, give The Electric Connection a call today.