Smoke detectors are very crucial pieces of safety equipment in your home and it is now also mandatory in NSW that residential properties have at least one smoke alarm on every storey. Not many people are aware of this, but a large percentage of fires in homes cause massive destruction because the smoke detectors didn’t function the way they should have.

The unfortunate fact is that we almost always take these fixtures for granted; we get them installed and rarely even notice they are there on the ceiling until they get set off accidently or when their batteries go dead. Improperly installed smoke detectors or even poorly-maintained ones will only end up letting you down exactly when you need them.

It’s important that you make smoke detector maintenance a part and parcel of your regular home maintenance routine. There two main types of smoke alarms used on residential properties:

These have minuscule quantities of radioactive material that reacts to the particles that are emitted when a fire breaks out, and that sets-off the alarm. These alarms are extremely effective in the detection of fast-flaming fires in which there isn’t too much of visible smoke.

These have photocells with a light beam that shines away from the cell. If smoke enters its test chamber, the smoke particles scatter some of the light; this hits the cell and triggers the alarm. These types of smoke detectors are ideal for detecting smouldering/smoky fires, which is how residential fires typically are.

Regardless of the types of alarms installed on your property, it doesn’t take more than a few minutes annually to ensure that these devices are in a working order at all times. The few steps you should take are:

Aside from the regular maintenance, it’s also very important that you consider how many smoke detectors you have and how they are powered. The best way to increase the effectiveness and safety of these devices is to upgrade your home’s smoke detection setup. The things to focus on are:

5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Let’s face it, in today’s very technological world, nearly everything we own needs to be plugged in and charged so it is ready to go when we are. Cell phones, laptops, tablets and even out cars rely on our home’s power to get charged. When there are several people in the home all fighting to get their gadgets charged up before morning, things get tense. Extension cords come out and a dangerous situation is created.

Our world, which involves televisions in every room, computers, coffeemakers, food processors, toasters and you get the point, need electricity. Have you ever done the free outlet search? You wonder around with your device in one hand with the waiting plug in the other and are prepared to plop down wherever the free outlet is in order to get the juice you need. This could be in the hallway, doorway or even the bathroom. You probably unplug one device so you can “borrow” the outlet. This is a recipe for sibling rivalry or frustrated spouses.

Stop doing that! Call your electrician in Beverly Hills. The Electric Connection is ready to help you make your life easier. Additional outlets are an easy fix that can go a long way to making your life a little less stressful.

Whether you need an outlet for you electric car charger or additional outlets in the kitchen to run all of your appliances, you are covered with the help of an electrician. Beverly Hills homeowners do not have to rely on extension cords or resort to uncomfortable positions in the hope just so they can get powered up. If you are tired of the free outlet searching, give the friendly staff at The Electric Connection a call today. We would love to talk with you about your options and get your appointment scheduled.