Electricity is a valuable part of our world today. We use it for just about everything. Without electricity, we would struggle to get through a single day. With that said, electricity can be extremely dangerous, deadly even. There are some electrical hazards you need to be aware of, teach your children and keep top of mind as you go through your daily routines. Becoming complacent around electricity can be extremely hazardous. Your Burbank electrician has some tips to understanding electrical hazards and how to avoid them. You can count on the crew at The Electric Connection to keep you informed about electricity and the potential hazards it poses.

1-Extension cords are not meant to be long-term solutions. They are simply meant for temporary fixes while you use a particular appliance. Extension cords are the cause of over 300,000 fires every year due to improper use. If you need an additional outlet, whether it is in the house or outside, call an electrician. Burbank homeowners don’t have to put their homes at risk by using extension cords as permanent fixes.

2-Pets and young kids and electricity never mix. Do what you can to keep children away from outlets and pets away from cords. You can buy cord protectors to keep pets from chewing on the lamp cord and outlet protectors to keep children from putting things into the outlets. These are quick, inexpensive fixes that can save lives.

3-Water is probably one of the most obvious dangers when electricity is around. You can protect yourself by having GFCI installed in kitchen and bathroom areas where water is most likely to be introduced to an electrical current. This is a simple fix that can be taken care of by your electrician.

Give The Electric Connection a call today to take care of any electrical hazards in your home.

Summer is right around the corner, which, for us here in Maryland, Virginia and Washington, D.C., generally means extreme humidity, unpredictable weather patterns and, in recent years, rolling blackouts. Although we have all undoubtedly been looking forward to warmer days after this volatile past winter, summertime is not without its headaches.

It was just last summer that a massive blackout left millions along the Atlantic Coast without power after devastating thunderstorms downed tree limbs and power lines across the region on June 30. Shortly after the power outage, the state of Maryland ordered a heat advisory, warning elderly and infirmed individuals to stay indoors. However, because of the blackout, millions were left without the air conditioning they relied upon to make temperatures indoors more tolerable. As a result, area hospitals that were already crowded following the storms were flooded with even more patients suffering from heat exhaustion and dehydration.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.