Losing power during a storm is always frustrating, particularly during storm season. But if you ask the best Frisco electrician how to prevent power outages, his answer is likely to be the same every time—during severe storm season, power outages are inevitable. However, you don’t have to go without power. Without an alternative power source, you’re likely to stay in the dark, but your best Frisco electrician can assure you that, with a generator, you never have to go completely without electricity.

Gas-Powered Generators — Are They the Answer?

While gas-powered generators have been the norm for some time, and they have proved to be a reliable means of keeping electricity on in the midst of a power outage, homeowners have found that owning one may not be without its problems. For instance, homeowners who live under a Homeowner’s Association (HOA) may find that there are restrictions prohibiting them from owning a gas-powered generator simply because the HOA may not allow generators to be placed outside of a home. This renders a gas-powered generator obsolete, since it can’t be placed inside your home due to the fumes. Those who live in apartments or condos face a similar challenge, as they may lack the outdoor space necessary for a gas-powered generator.

If you think this limits your options for power during an outage, however, don’t fret. Indoor generators may be just the ticket for you and your family to keep power on while the rest of the neighborhood’s electricity stays off.

Indoor Generators — An Eco-Friendly Solution

Indoor generators bring with them a myriad of benefits that go beyond keeping your lights on. Built specifically for indoor use, an indoor generator is a safe alternative power source that you can feel good about using.

Rechargeable. Indoor generators use batteries for power, so all you have to do is plug them into an existing power supply to charge. In the event of a power outage, power will stay on seamlessly as the unit picks up where the outage left off. In addition, some generators can be charged with wind and/or solar power, so you can charge your unit without being plugged into the grid. Fully charged, an indoor generator can keep you powered anywhere between 2 hours to seven days.

Gas-free. Because the generator is battery-powered, there are no fumes to worry about and no gas to burn off.

Custom-made and easy to store. Depending on the indoor generator you choose, they can be customized to fit the décor of your home, keeping your home looking neat while also making it simple for you to store your unit.

Simple to install and affordable. Indoor generators are more affordable than you might think, and they are easy to install, so you can have peace of mind right when you need it.

You don’t need to be the best Frisco electrician to recognize the benefits of an indoor generator.

Smart technology is poised to take over the home appliance market. We already have smart thermostats, smart lighting and even smart refrigerators. If that's not enough for you, there are some new contenders on the market that allow you to turn any electrical device in the home into a smart item. The best part is that it's a simple DIY experience – no need to find an electrician to hook it up. It’s the smart plug, a small box that you plug into your home's outlets. From there, you can use your smart phone to control whatever light, television or other electronic appliance routed through the smart plug. Read on to learn more about these remarkable efficiency devices.

Control and Monitor Your Electronics

There are a variety of smart plug options on the market: The Satechi IQ Plug, the Belkin WeMo Insight Switch, the D-Link Wi-Fi Smart Plug and the Valta Starter Kit, among others. The cost and functionality of the different brands vary, but they all operate on a similar principle – allowing you to set schedules and remotely control whatever device you choose.

The smart plugs connect to your phone via Bluetooth or wireless Internet, so you can switch them on or off from anywhere in the home – or even from the other side of the country if you have an internet-optimized model. You can also program schedules so the plug automatically activates an appliance at appointed times – turning a coffee maker on first thing in the morning, for example, or switching on a space heater before you go to bed in a chilly part of the house.

Retro Meets Modern

The upshot is that there's no need to wait for cutting-edge smart devices to come out to keep your home on the cutting edge of technology. Imagine impressing your neighbor by demonstrating the new smart functionality of a retro 1950s television, or your old Victrola vinyl player.

Smart plugs also monitor how much electricity a given device uses and when, so you can make informed choices about increasing your energy efficiency though disaggregation, breaking it down appliance by appliance. You can also save energy by using the smart plug to turn off the power to devices when you aren't actively using them, preventing your electricity bills from skyrocketing due to always-on settings or “energy vampires.”

Savings and Control All at Once

If you have additional questions about smart plugs and how they work, find an electrician who can show you their utility and functionality. With surprisingly little effort, you can harness their power to save energy and control devices all throughout your home.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.

Recently, Digital Trends profiled a Paolo di Trapani, and his work has a lot of people excited. For all the rapid progress that has been made with LEDs, no one else has made this important step towards recreating natural light.

The article explains how lighting innovations have allowed people to use artificial light in a number of amazing ways. We can change the color temperature of a light bulb with a smartphone, and we can grow food indoors, but we haven’t yet been able to mimic the way the atmosphere scatters the sun’s natural light…until now.

According to Digital Trends, di Trapani’s technology scatters the light of a panel of white LEDs with “a clear plastic panel studded with nanoparticles that are invisible to the naked eye.” What’s a nanopartical? A nanoparticle is what it sounds like: A really small particle. Nanoparticle research is currently hot because there are tons of ways that nanoparticle research could be applied in biomedical, optical, and electronic fields.