Whether it has to do with a simple home improvement or a more in-depth renovation, a permit for electrical work is required to obtain permission from the governing authority to go forward with the project. Permit pulling—requesting a permit from a governing authority, which could be State, County or City —can be challenging for homeowners who are not familiar with electrical plans. but the process of pulling permits for electrical work is fairly straightforward if you understand and meet all requirements for electrical contractors.

Each city, county and state can have varied building codes, so it is important to use a professional who is versed in navigating this process. Permit pulling requires first submitting an official application that includes a schematic of what electrical work is going to be done. There will be a permit fee involved to cover the application cost, the review and the inspection. Once a plan is approved, a permit will be issued, and work can begin. On-site inspections will be conducted to ensure that all of the work conforms to the permit as well as building codes and plans. Depending upon the size of the project, there may be more than one inspection, usually a rough and final or possibly partials of either. These inspections serve to protect homeowners from faulty or possibly hazardous work. A code official will come by at the project end in order to provide all required documentation. Final approval will only be given once full code compliance is met which could mean NEC, UBC or IBC regulations. If the homeowner is completing the electrical work as a do-it-yourself project, it may take multiple visits from the code official before a final approval is provided, depending upon the skill level of the homeowner.

Super Bright LEDs employs skilled engineers and experts to test LED lights before they’re sold. Our in-house test lab is stocked with numerous pieces of equipment that provide important specifications about each product, such as brightness, color temperature, and operating temperature. Testing methods include the use of integrating spheres, spectrometers, Forward-Looking Infrared (FLIR) cameras, and an environmental chamber. In addition to this equipment, our technicians perform burn-in tests and durability tests that can last anywhere from two weeks to several months.

CCT, and

Our state-of-the-art environmental testing chamber utilizes a 30-cubic-foot enclosure to reproduce the full ranges of temperature and relative humidity found within commercial and industrial LED lighting applications. Data collection (photometric & electrical) occurs while a device-under-test cycles through specified environmental extremes. Chamber temperature ranges from negative 35° C (negative 31° F)  to 200° C (392° F), and humidity ranges from 10 to 95 percent.

To ensure that our products will perform under normal and extreme conditions—and to have a little fun—our technicians put them through a round of applicable tests. A selection of LED lights is time tested in the environment that each product is designed for. For example, waterproof boat lights are submerged in water, and weather-resistant landscape lights are installed outside. Depending on the type of product and its impact/weather rating, our technicians might drop, run over, freeze, burn, or even saw it in half to test the product’s durability.

You have probably become so used to smoke alarms you rarely even notice they are in a room. That means you don’t notice when they are not around either. Or if they are working properly or placed in an appropriate place. Smoke alarms are one of those things that we ignore until we burn toast and remember we have them. Then they become an annoyance and the batteries are popped out with the intention of replacing them once the smoke has cleared out. Unfortunately, because they are so easily forgotten, they are often not replaced. An electrician in Glendale, like those at The Electric Connection, has a few facts to tell you about smoke alarms. These facts remind us why those little white discs in the corner are so important.

1-Smoke alarms need to be replaced every ten years. Most people assume they are good forever.

2-30 percent of home fires are in homes that have expired smoke alarms or no smoke alarms at all.

3-It is imperative you test your smoke alarm every month. A Glendale electrician points out it takes less than a minute to complete this potentially life-saving task.

4-Batteries should be replaced in each smoke alarm every 6 months, regardless if they are working. Fresh batteries are best.

5-Opting to go with at least one hard-wired smoke alarm on each floor is a good option. These will be installed by an electrician. Glendale homeowners can rest assured they will always have protection whether the batteries are fresh or not.

6-Every bedroom in the house should have a smoke alarm. A smoke alarm should be on each floor as well. 66 percent of homes do not have the minimum number of smoke alarms recommended.

If you would like to add another layer of protection and have hard-wired smoke alarms installed, give The Electric Connection a call today and schedule your installation.

Christmas, Hanukkah, Valentine’s Day, Independence Day and even Halloween … No holiday is immune to the spell of twinkling of lights. Since July 2009, we’ve written over 600 blog posts. It comes as no surprise that a large majority of them have centered around a holiday. If you are one of the many folks hauling out holiday lights this weekend, you’ll appreciate this round-up of 6 Popular Holiday Lighting How-To Blog Posts that we’ve accumulated throughout the years.

1.

energy-efficient LEDs. If that’s not enough to convince you, this blog post from 2011 gives even more statistics on the benefits of upgrading your holiday string lights. (Update 2015: This blog post is now part of Winning the Battle on Christmas Lights: Artificial Trees

4. Lights for a Holiday-Ready Home

6. Follow Pegasus Lighting’s board Inspiration | Holiday Lighting on Pinterest.