Smoke detectors (smoke alarms) are one of the most important safety devices in your home. If your home has well-maintained smoke detectors, the chances of your family surviving a house fire are greatly increased. From 2003 to 2006, 66% of fatalities due to house fires occurred in homes without working detectors (National Fire Protection Association).

Most homes have smoke detectors, but many times they are not located properly or are not working due to lack of maintenance. Of course, a smoke detector in the wrong location or one that no longer works because it has a dead battery provides no protection for your family. The Electric Connection, a fully licensed, bonded and insured electrician in Burbank CA, knows the most current code rules for smoke detector placement and they can install or replace your smoke detectors for you.

Maximizing Protection

Your family will have maximum protection if:

Can I install them myself or should I have my Burbank electrician install my smoke detectors?

You can purchase battery-operated smoke detectors from a hardware store and install them yourself. (If you decide to install your own smoke detectors, check your local building code for placing them.) For detectors that are wired into your electrical system, the U.S. Fire Administration recommends that detectors be installed by a qualified electrician. The Electric Connection, a local electrician in Burbank, can often schedule an electrical service call appointment for the following day.

Are they expensive?

Depending on the type of detector you decide on, they can run from $10-$40 each, not including installation costs. You can often get a ballpark price over the phone for installation pricing from a Burbank electrician.

How should they be maintained?

Most detectors start “chirping” when batteries have run down. In addition, the U.S. Fire Administration recommends testing them monthly. They recommend:

Are your detectors properly positioned?

The guidelines given here can help you determine if existing smoke detectors are properly positioned. If you are going to install battery-operated ones yourself, follow the placement requirements of your local building code. In general, it’s recommended that you have a smoke detector:

Within these general guidelines, detectors should be placed where smoke can be readily detected — high up on walls or on the ceiling (smoke rises) and at a distance from windows, fans, and vents that might blow smoke away from the detector.

If the smoke detector is wired into your electrical system, it should not be on a circuit that can be turned off with a wall switch. It’s always best to consult with a licensed Burbank electrician when it comes to hard wire some detector installations.

If a smoke detector is placed too close to a kitchen stove or shower, it can be triggered unnecessarily by steam or normal cooking smoke. Better to move it to a different location that also meets general safety guidelines and your local building code.

If you are uncertain about placement or need help with installation or battery replacement, call a qualified electrician in Burbank, such as The Electric Connection or visit our website.

When looking for a home a lot of homebuyers flip the light switches, check the outlets, briefly look at the electrical panel, and think that the electrical system is perfectly fine. However, this is not always the case and it is important to have an expert come in for inspection.

Your home’s electrical system will age, just like your plumbing, roof,  air conditioning and heating system.  Those systems can have unexpected issues and problems, and so can your home’s electrical system.

Over ten years, the reliability of your homes’ electrical system can deteriorate greatly. Certain components can expire, like smoke detectors. Other items can wear out and not function properly like light switches, receptacles can wear and lose retention, GFCI outlets and smoke detectors may not be operable and may not be there when you need them most. Here are a few electrical components that can change over time and here is some information regarding other problems associated with older homes electrical systems.

A ten year checkup is a good idea. We always will perform a complete inspection with every service call. But if you haven’t needed to call in an electrician for a while, it’s a good idea to have one come in at least every ten years and provide a comprehensive check of your electrical systems.

There’s certainly a lot to be enjoyed about a Florida winter season. The mild weather, the festivities—it’s all quite nice. But just because the season brings some advantages doesn’t mean you have nothing to be concerned about regarding your home’s electrical! There are some challenges unique to this time of the year, and at Hoffman Electrical, our team is dedicated to ensuring you’re completely prepared.

At Expert Electric we often get calls from our customers requesting chandelier installation. A chandelier is a great lighting option. Adding a new chandelier can do a lot to change the look and feel of a room. It adds style to your home while lighting effectively. A chandelier is basically a beautiful piece of illuminated art. The installation of a new chandelier will vary with the type and size you choose and the location it is to be installed in. Choosing the right chandelier is a very personal choice. But whatever chandelier you choose, your electrician, in almost all cases, can install it for you.

Ceiling Heights and Chandeliers

According to OSHA, “Safety related work practices shall be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contact.”  *   This OSHA rule helps to enforce national guidelines regarding  Arc Flash Protection.

The type of protective outer wear worn depends on the level of flash risk. While working in the lowest risk levels, personnel must wear flame-retardant clothing. The level of protection gradually increases to include rubber gloves and other specialized clothing.  As the  level of risk increases employees must don a specified number of layered, flame-retardant clothing under a multi-layered flash suit complete with hood and gloves.

*OSHA 29 Code of Federal Regulations (CFR) Part 1910, Subpart S

The Denver electricians at Piper Electric Co., Inc. regularly perform arc flash studies in accordance with OSHA regulations to determine the degree of danger involved in industrial settings. The analyses are performed as a means of understanding and preventing possible arc flash hazards. In keeping with National Electrical Codes and OSHA requirements, an electrical engineer surveys the breaker panels, fuse panels, panel boards and switch panels along with motor control centers and panels in the facility. Following the evaluation and calculations, each location receives an ANSI arc flash warning label.  This marking can be generic or very specific, whichever is more relevant. Future revisions of the NEC standard may require more detailed information on this label.  At minimum the label should contain enough information to determine the area where conditions exist that only qualified workers should enter.