Insect Vision: Ultraviolet, Color, and LED Light, Marianne Shockley Cruz and Rebecca Lindner from the University of Georgia’s Department of Entomology write, “Experimental work supports the idea that color perception exists in insects and that they are especially responsive to the shorter wavelengths of the visible spectrum and UV light.” Wavelengths are measured in nanometers, and shorter wavelengths of light (less than 550 nanometers) can indicate ultraviolet (UV), blue, or green colors. Cruz and Lindner also cite work that confirms the correlation between UV light from the sun and moon and how certain bugs navigate Earth. Another point to remember about bugs is that certain types, such as mosquitoes, are attracted to heat and have thermal receptors to help them find it. All of this information is helpful for determining why bugs flock to certain light sources.

The color that is emitted from a light source is important because of its ability to attract bugs. As previously stated, shorter wavelengths (UV, blue, and green light) are more visible to bugs than longer wavelengths (yellow, orange, and red light) and, therefore, will draw them closer. Incandescent, compact fluorescent (CFL), halogen, and high-intensity discharge (HID) lights emit UV radiation that is attractive to bugs, and since certain types of bugs navigate by UV light from the sun and moon, a closer, brighter source of UV light can disrupt their orientation and draw them in. LEDs produce very little to no UV light, which makes them less visible to bugs. However, it is still possible for an LED bulb to produce shorter wavelengths of light (bluish-white/cool white color), which will be more attractive to bugs. Therefore, when browsing for LED lights that will attract less bugs, it’s important to choose a fixture that emits more wavelengths that are above 550 nanometers, such as warm white, ultra warm white, or yellow lights.

CCT) instead of nanometers, it’s easy to tell if the bulb will be more or less visible to bugs. CCT is measured in Kelvin (K), and different temperatures on the Kelvin scale represent different colors. An LED bulb with a CCT below 3600K will emit warm or ultra warm white light that’s not easily seen by bugs. Bulbs with CCTs of 3600K and above will emit natural or cool white light that is more likely to attract bugs.

Incandescent, halogen, CFL, and HID bulbs waste most of the energy they consume—as much as 90 percent—in the form of heat. Bugs with thermal receptors can sense the heat released by these light sources. LED bulbs produce a minuscule amount of heat, which makes them less appealing to bugs.

Bug lights are simply light bulbs with a yellow coating that decreases the color temperature of emitted light. Because of the coating, bulbs will emit a peak wavelength of light that is around 550-600 nanometers. However, you don’t need a yellow-coated bulb to reduce the presence of bugs. LED lights that emit warm-colored illumination, such as yellow malibu light bulbs for landscape applications, or From top left to bottom right: incandescent bug light, yellow LED strip lights, yellow LED malibu light bulb installed in landscape fixture, and gold-tint LED filament bulbs

Ecologist Michael Justice performed an experiment to determine the type of residential light that attracts the least amount of bugs. He used six lighting types inside of an insect trap each night during the summer. Justice also made efforts to equalize the effects of weather and the moon’s irradiance. His LED Z-Bug Bulb™ from NEBO is a bug zapper and an LED bulb in one. The bulb emits white illumination from its top and ultraviolet (UV) light from its caged center. The UV light attracts mosquitoes and other insects toward the bulb’s high-voltage electric grid and kills them on contact.

Because different types of bugs see different wavelengths, it is never guaranteed that an LED light won’t attract them. However, most bugs are attracted to short wavelengths of light and are especially drawn to UV light; they can see it better, and some use it for navigation. Bulbs that emit more short wavelengths of light (cool white/bluish color) will attract more bugs. Lights that emit a majority of longer wavelengths (yellow/orange/red colors) are less visible. Heat can also draw bugs into an area. LED lights produce little to no UV light and a minuscule amount heat, which makes them less attractive to bugs—so long as they emit longer wavelengths of light.

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.

In 2015, almost 40 million people were living with disabilities in the United States alone. Many people don’t expect a debilitating injury, so their homes become ill-suited after a severe accident or illness leading to their condition. Here are a few alterations to home electrical systems that might be useful to people with disabilities.

Electricians understand the different kinds of lighting a person can use in their homes. For those who don’t get much natural sunlight, full-spectrum lighting can reduce the yellow wavelength of light and cast a glow similar to natural sunlight. Disabilities can often cause depression or mood swings as the person affected adjusts to this change in lifestyle. His or her family and caretakers also have to adapt. Studies have shown natural light often improves peoples’ moods, which is essential to those who may be experiencing stress in response to the disability.

Electricity is something we use every single day, at home and in our workplace. Commercial and industrial establishments would never be able to function without it, and yet we take it for granted – at least until the time something goes wrong with it. While the electrical fixtures and fittings are all within sight, the wiring and other related installations are typically out of sight. This also means that we don’t really pay much attention to them at all.

What we don’t realise is that while most electrical issues seem like they have arisen out of the blue, there are almost always some warning signs. Electrical issues can result in electrical fires that can be extremely dangerous. Melted wiring is one of the commonest causes of electrical fires. There are a number of things that can lead to melting of electrical wiring, such as:

Electricity anywhere has an electromagnetic field; and the electricity flowing through the wires on your property is that way too. This electromagnetic field is at a certain level and that is why it isn’t really evident. However, at times there is an excessive build-up of electricity in the wiring on your property, which weakens the wires. If you don’t address this issue on time, the wiring will melt and result in arcing, and that is when you hear the crackling, hissing or buzzing sound emanating from wires.

All electrical installations are made to carry a certain amount of power load. Older structures tend to also have decades-old wiring; that is unable to bear the load of current-day, power guzzling electrical appliances and equipment.

If you run too many of these all at once on your property, it results in an overload in the system. Typically when this happens, the fuse connected to that particular circuit blows. If, for some reason, this doesn’t happen and the electricity continues to flow through the system, it will cause the old wiring to melt.

A short circuit is caused when a neutral wire comes in touch with a live wire. Just as in the case of a power overload, if this occurs, the fuse will blow and the electrical supply within that circuit will get disconnected. However, if this doesn’t take place & the electricity keeps flowing through the wires, they will get heated up and melt.

If you find anything out of the ordinary with the electrical installations in your home/commercial establishment, never defer calling in an electrician to check what the issue is. The signs to look out for are arcing in electrical installations, switches and powerpoints that are hot to the touch etc.

Attending to all these issues on time will ensure that you have less problems to deal with, later. Never forget that electrical issues can be very dangerous and the more you defer getting them checked, the more you endanger your safety and that of anyone who lives or works on your property.

The one way to prevent electrical issues from surfacing in this manner, is to opt for preventive electrical maintenance services. As part of these services, the electrician will come in at pre-decided intervals and thoroughly test all the electrical appliances, fixtures, installations and wiring on your premises. If he notices anything out of the ordinary, he will inform you about it and it can be fixed before the issue aggravates and poses a risk to life and property.

We at Allround Electrical are licensed and insured electrical contractors, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263