Electricity is such a common part of our world, we rarely think twice when we use it or are around it. Technology and a lot of trial and error has made electricity extremely safe with safeguards built in place on almost everything that uses electricity to run. We feel safe around it and tend to get complacent. Complacency can be extremely dangerous and cost us a home or result in a serious injury. Your electrician in Glendale wants you to keep some things in mind when you are using electricity in and around the home. If you have questions, give The Electric Connection a call.

What NOT to Do

*Never yank a cord out. Always use your thumb and finger placed on the designated area and gently pull.

*Don’t use a cord that has any holes in the protective coating says an electrician. Glendale homeowners can use electrical tape or have the cord properly repaired by a professional.

*Don’t connect several extension cords together. This can damage the appliance as well as cause the breaker to trip.

*Don’t staple or nail a cord to the floor or wall to keep it out of the way. You could damage the protective coating and cause a short.

*Don’t try and fix or work on any appliance while it is plugged into the wall.

*Don’t run a cord under a rug or in a high traffic area. If you need a better placed outlet, have one installed by a Glendale electrician.

*Don’t plug in an appliance if your hands are wet or you are standing in water.

Electric safety is fairly simple, but it is important you are always thinking about what you are doing to avoid silly mistakes that can end up being extremely hazardous. Give The Electric Connection a call if you would like to learn more about how you can make your home’s electrical a little safer.

You have probably heard about standby generators for homes. The generators are meant to keep a home powered during a power outage and have become quite popular over the years. More and more homeowners are making the investment to have a backup source of power as it becomes more obvious the power grid is not able to keep up with the demands. A generator installed by a Glendale electrician is an ideal option for those who rely on electricity and are not okay going without. Is your business any different? The team at The Electric Connection can help you add a safety net to your business operations with the installation of a standby generator.

When the power goes out, your business instantly starts losing money. If you can’t sell your wares or use computers to access accounts and meet deadlines, your business cannot function. There is no reason your business has to be vulnerable to power outages whether they are brief or extended. An electrician in Glendale can help you determine what your electric needs are and what size of generator you would need to stay up and running. You may need to scale back your operation, but you would still be able to have your doors open.

Having a generator for your business keeps your employees working and you are able to continue to serve your customers and clients. There is no need to be completely dependent on a shaky power grid. With a hot summer being predicted, there is a strong chance there will be rolling blackouts. Call an electrician. Glendale business owners need to start thinking about how they will keep their doors open this summer no matter how many power outages they are faced with. Give The Electric Connection a call today and talk with one of our professionals about a generator for your business.

As energy costs continue to rise, we all have to make some adjustments and figure out how to afford the higher electrical bill or how to reduce our electricity use in order to afford a roof over our heads. Obviously, the latter is probably the best and who knows, you just may be able to reduce your bill lower than you ever thought possible. You could actually put a few extra dollars in your pocket every month to put towards the rising cost of food. An electrician in Pasadena has a few tips you can start using today to save money tomorrow. If you would like to learn more, call The Electric Connection and talk with a member of the helpful staff.

1-The easiest thing for you to do is to turn off and unplug anything and everything when it is not in use. You can save a couple dollars every day by reducing your phantom energy draw.

2-Switch to CFLs and save about $20 a month on lighting costs. If you have a big house and typically use a lot of lights, you can save more by switching your incandescent light bulbs to CFLs.

3-Have somebody familiar with Pasadena electrical code install a ceiling fan to reduce your heating and cooling bill. Fans circulate the air in a room to help keep it cool in the summer and warm in the cooler months.

4-Hire an electrician to install dimmer switches on lights in the living room, dining room and even a bedroom. You don’t always need a well-lit room to watch television, enjoy an intimate meal or simply chat. Using a dimmer switch to turn down the lights can save you money on your electric bill.

If you would like to schedule an appointment to have a dimmer switch, ceiling fan or other energy-saving appliance installed, give The Electric Connection a call today.

There are few better or more cost-effective ways to make the outside of your home and the surrounding property more attractive than with a new outdoor lighting design. New lighting will give your house a bright and fresh look, and landscape and walkway lighting will make the recreation areas around the home inviting and safer.

However, you should entrust the work of creating and installing outdoor lighting in Cambridge, MA to professionals. You can only reap the full benefits of an extensive redesign with the assistance of electrical experts with a background in creating effective contact FB Electrical Services or come visit our showroom near Boston, where we can show you some of the possibilities for giving a new life to your property and the exterior of your home. We back all our new installations with a 1-year labor warranty.

Since 2008 FB Electrical Services has offered comprehensive electrical services in Boston and Eastern Massachusetts, and we can help you get the most from your new outdoor lighting.

Creating an eye-catching storefront doesn’t have to be complicated. There are several LED sign lighting options that are quick and easy to install, and they’re available in a wide variety of colors and intensities that will help you achieve the look you want. LED strip lights are perfect for illuminating storefronts, window displays, channel letters, and light boxes for indoor or outdoor signage. Both types are similar in operation, but they’re different in design; because of this, one might be a better fit than the other depending on your application and desired look.

Much like LED sign modules, these lights are perfect for storefront windows, light boxes, and sign backlighting. Strip lights consist of a series of LEDs that cover the length of the strip. These LED strip lights are available with different types and numbers of LEDs. High-density strip lights have more LEDs than a standard-density strip and are usually brighter depending on the type of LEDs on the strip. The strip you choose will depend on how bright you want your sign or window to be.

Depending on the LED strip lights or sign modules you choose, there are options for adjusting brightness, color, white color temperature, and color-changing modes. In the accessories tab on each of our product pages are compatible controllers and dimmers that include anything from in-line controllers and RF remotes that let you control multiple light zones to Wi-Fi hubs for light operation from your cell phone or tablet. Make sure to check the specifications of any controller or dimmer to ensure that they will work with your LED lights.

LED sign modules and strip lights will also require a power supply. Compatible power supplies are listed under the accessories or power supplies tab on each product page.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.