With the unseasonably cool temperatures gripping the entire country right now, you are probably considering the purchase of a space heater to help ward off the chill. There are several different kinds of heaters on the market today. As you can imagine, some are better than others. An electrician in Los Angeles is here to explain the most common types of space heaters available. You can call The Electric Connection for more information.

Oil-filled radiators are one of the safer types of space heaters. Oil is heated and rotated through the radiator releasing heat into the room. They are silent due to the lack of a fan. They can heat a small room. Fortunately, they do not get overly hot and will not cause scalding burns if you happen to touch them. However, they produce enough heat that you will want to follow the standard guidelines of keeping the heater at least 3 feet away from walls or furniture.

Ceramic-element heaters are rather small, but produce a great deal of heat. They are typically safer than their counterpart, the coil-based convection heaters. Different fan settings will help control the amount of heat produced. One of these heaters could heat a small room or used at a desk.

Infrared space heaters are new to the market and do cost more, but they are much more energy efficient. They can heat a large room and in some cases an entire home if it is relatively small and well-insulated.

As far as the cost to your Los Angeles electrical bill, space heaters are not as bad as many assume. It will depend on the type of heater you use and how many kilowatts the heater uses. If you are looking to make a long-term investment, the infrared heaters are a good option and will ultimately save you money in the long run with a lower heating bill. If you have more questions about space heaters, give The Electric Connection a call today.

If you’re experiencing shocks when you pull a plug out of the wall, or if you notice a spark when turning a particular electrical switch on and off, a faulty appliance or bad wiring may be to blame. Be careful to make the distinction, however, between an electrical issue and a shock that might occur after, say, crossing a carpet. The latter is caused by static and is not a serious issue.

Flickering lights are irritating, but they aren’t always cause for concern. They may just be flickering because of a faulty or loose bulb, so try swapping out the bulb in a flickering light before calling in a professional. If that doesn’t work, the wiring in your circuit breaker may need to be reworked, or there may be an issue with the connections in your light fixture.

If a bad burn-like odor emanates from the outlets and switches in your home, the first step you should take is to turn off the power from the electrical panel. The second step should involve placing a call to your electrician, who can tell you if the problem is with a particular device or a potentially serious wiring issue. Don’t ignore a burn smell – if left unassessed, it could lead to an electrical fire.

While some of these signs don’t always indicate a serious problem, others are cause for concern. When it comes to electricity, it’s always best to err on the side of caution, so if you’re experiencing any of these issues and can’t determine the cause, it is time to make a phone call.

The MD, DC, and VA area is known for getting slammed with violent and powerful thunderstorms that produce severe lightning. Electrical surges, which are caused by lightning, can wreak havoc on your expensive electronics and appliances.

A lightning strike that hits a power line several miles away from your house can impact all your electronic items. Whole-house surge protection is the best option you have to protect your home electronics and wiring from the damage caused by lightning strikes.

Everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends the use of whole-house surge protection. As a homeowner, the good news for you is that protection is readily available, and even top-of-the-line solutions are affordable. The gold standard in whole-house surge protection is a two-tiered system—a whole-house surge protective device, or SPD, installed at the circuit breaker box, and plug-in SPDs on individual outlets. A whole-house SPD can protect against up to 40,000 amps of current flowing into your home from the outside; normal household power is between 200 to 300 amps. When an electrical surge occurs as a result of a lightning strike, the device detects the excess current and safely diverts it through the house’s grounding path. Whole-house surge protection provides homeowners in MD, DC, and VA peace of mind when a powerful thunderstorm passes the area.

Whole-house surge protection can typically be installed in a home for around $200—it’s an easy job for a top electrician. The cost of replacing electronic equipment in an average home is a whopping $8,000, and it may be even higher for homes in MD, DC, and VA. Whole-house surge protection is cheap insurance against electrical surges caused by lightning strikes. It provides a layer of protection to all the electronic items in your home.

To ensure complete safety, Kolb Electric recommends that you allow a qualified, experienced electrician to complete the wiring for whole-house surge protection—there are several steps involved that are best left to a professional.

If you require surge protection wiring or want a full whole-house surge protection installation, contact Kolb Electric.

Commercial buildings require special considerations when it comes to electrical wiring. Most commercial buildings do not have the luxury of a wooden frame to run wires through, so other wiring methods must be used. Some of those are discussed below.

In some instances, armored cable may be used. This type of cable, known as teck cable, is available in nearly any size and features a core made of the desired number and sizes of wires, protective jacketing, flexible aluminum armor, and in some cases a weather-resistant exterior jacket. Teck cables can be pulled through conduit, cable tray, or be buried directly in the ground as long as the cable is rated for direct burial and certain burial depths are adhered to. Teck cables can also be installed in hazardous locations by using special explosion-proof cable fittings and approved sealing compounds. The main advantage to teck cable is its ease of installation and versatility. When using a cable tray system, cables can also be easily added or removed at any time.

With this basic knowledge of the types of electrical wiring methods used in commercial buildings, it is easy to select the best option for any installation.

Simple lighting changes can have a huge impact on the look and feel of the rooms and hallways in your home. If your home is laid out properly, adding some great-looking wall sconces can add to the homey, inviting feel of your home. In addition to the great look that they provide, wall sconces also take up a very small amount of room, because they are placed directly on the wall. For this reason, they are perfect for bathrooms, hallways and other small spaces.

One thing to keep in mind when having your electrician in Beverly Hills install your wall sconces is proper placement. Making sure that your wall sconces are placed in the appropriate places is key to a successful installation. By placing your wall sconces strategically, and attaching them to dimmer switches, you can accent all the areas in your home that you feel like accenting. This can create a very dynamic, easily manipulated and inviting atmosphere. You should also strongly consider the height at which your wall sconces are placed. For the best results, choose a height and stick with it. Placing them uniformly gives them a professional and continuous look.

Wall sconces have become very popular in homes throughout the country, largely because of their small size and ease of installation. Although their primary use is to provide light in underlit areas, wall sconces can also be decorative elements when not lit. When coordinated with your décor, they can give your home a certain amount of flow and decorative continuity that is not possible otherwise. You can find them in many different shapes, sizes and styles that are ready for your electrician Beverly Hills to install today. To talk about installing wall sconces or any other light fixtures, call The Electric Connection Today.

Click here to visit our website.