It is important to know the basic information about workplace electrical risks and prevention, especially if you are working in the Here are some of the most common workplace electrical risks:

Faulty Equipment: Equipment that isn’t working properly can cause electrical shocks. These shocks can cause serious injury in and of themselves, but can also lead to workers falling off ladders or other platforms. Faulty equipment and electrical appliances can also cause fires.

Misuse of Equipment: Workers who do not have adequate training on certain pieces of equipment may not follow all the necessary safety precautions. This can result in electrical shocks or fire.

Misperceptions: Workers may be working on or near equipment which they thought which they thought was dead but is actually live.

If you are working around electrical equipment, it is highly likely that you might encounter workplace electrical risks on a daily basis. Raising awareness for you and your co-workers, in addition to proper care and maintenance of electrical equipment is key in preventing hazards, injury and damage.  That’s why it’s so important to familiarize yourself with potential dangers, learn how to avoid them, and be prepared in case of emergency. Good luck keeping yourself and your workplace safe.

Whole-home surge protectors are designed to protect your home from dangerous lightning strikes that could knock out power or fry your electronics, potentially resulting in thousands of dollars in damages.  Recently, however, there has been a lot of controversy surrounding whole-home surge protectors, claiming they’re a waste of money and don’t do what they claim to be able to do. So what’s the real story here? Are whole home surge protectors worth it?

We’ll start by talking about what surge protectors are not designed for: protecting your home from all sources of increased voltage. Power surges most commonly originate inside your home as a result of different appliances turning on and off. Depending on your home’s electrical service (100amp vs 200amp or whatever you may have), you’ve probably seen this in the form of flickering lights when your air conditioner cycles on.

Whole-home surge protectors do protect your home from power surges that originate outside, commonly caused by lightning strikes but also resulting from any interruptions to the power: downed wires or utility poles, wind damage, utility repairs, etc.

There are a few different ways power surges can occur. Lightning strikes, which people tend to be most worried about, are actually pretty uncommon—conditions need to be perfect, and the strike needs to occur less than one mile away from your home. Despite their rarity, lightning strikes can send a 200,000-amp jolt through your home and are definitely not to be taken lightly.

The majority of external power surges occur when the magnetic field created by wires conducting electricity collapses, which sends large voltages down the wires and eventually, into homes and buildings.

Effectively defending your home from power surges requires a two-step approach: first, outfitting it with a whole-home surge protector, then using surge-protected outlets and power strips indoors. Both types of surge protectors act essentially like pressure relief valves, diverting excess energy away and restoring normal operation once levels regulate.

Whole-home surge protectors are usually wired to a service panel and are designed to stop surges of at least 40,000 amps, though larger ones can be installed. Pairing them with individual plug-in surge protectors should do a good job of catching any potentially damaging energy that may get into your home.

Like many safety-related things, whole-home surge protectors are appliances you buy and hope to never actually use. But all it takes is a single downed line or big lightning strike to cause thousands of dollars’ worth of damage to your home—not worth the risk!

If you want to protect your home from dangerous jolts of electricity by installing a whole-home surge protector, call Kolb Electric today!

Doing things around the house is a satisfying chore. Sure, it can be a lot of work and it may not have the same finished quality as a professional, but you can still look at the walls you painted, the pavers you put down or the new sod outside and acknowledge you did a great job. Those are all jobs that have some wiggle room when it comes to following the rules. You don’t have to worry too much about your safety or the safety of your home if you made a few minor mistakes. That cannot be said of any of those seemingly little projects around the house that involve electricity. You can’t take the risk of messing with the electrical work in your home if you are not properly trained. You must hire an electrician in Burbank, like those at The Electric Connection.

The risk of you hurting yourself doing something that appears simple, like changing out an old outlet, is very high when you don’t know what you are really doing. It isn’t a time for guess work or “good enough.” It needs to be done right. In fact, if you happen to make a mistake that results in a fire, your homeowner’s insurance may very well refuse to pay the claim. The very fact that the outlet resulted in a fire can be blamed on trying to handle a job that should have been taken care of by a certified electrician. Burbank homeowners don’t need the hassle and stress worrying the DIY job they did is done correctly.

It may seem like an expense you can avoid, but it is always best to be safe than sorry. Hiring a Burbank electrician will give you peace of mind that the job is done right and you can feel safe in your home. The cost of the electrician is well worth it when you look at the grand scheme of things. Give The Electric Connection a call today and schedule any electrical jobs you have been thinking about doing yourself.