The bathroom is a place full of moisture and humidity. If this moisture is allowed to sit in the air for too long without being vented it can cause damage to the structure of the home. The moisture may start the growth of mould and mildew in windowsills and throughout the dry wall. Water damage may also occur which can be a costly fix. That is why each bathroom should have an exhaust fan to suck moisture out of the air and blow it outside the home. However, care should be taken when installing an exhaust fan due to the amount of moisture interacting with electricity running to the exhaust fan.

In order to add an exhaust fan into your bathroom, you will be required to install a vent that connects from the exhaust fan (in the roof of your bathroom) to the outside of the home. If you are not experienced with this type of work, have a professional complete the work as the roof and structure of the home may be damaged if not done correctly. The exhaust fan is installed in the bathroom, which pulls in the air and pushes it out of the home. This is how the air that is dense in moisture is pushed out of the bathroom.

While this might appear to be a simple job that any handyman would want to perform themselves, if the wiring is not done correctly, you could cause more damage to your bathroom than the moisture will. To turn on and off the exhaust fan, you will be required to add an additional light switch and wire the switch to the exhaust fan. Handling electrical wiring is not something that everyone is comfortable with, and if the wiring is done haphazardly it can lead to electrical fire. Additionally, with the amount of moisture in the air, if any of the wires are exposed the electricity could leave the wires and electrocutions and shock could occur. We would advise you to use a licenced electrician when performing this electrical work to keep yourself and your family safe.

If you have a bathroom in your home that does not have an exhaust fan, plan to have on installed and contact Expert Electric. We can help perform the electrical work safely so that it is ready for the fan installation.

A home power outage can happen without warning and at the most inconvenient time. Really, there isn’t a convenient time to lose electricity. We often forget just how much we rely on power throughout the day until we lose it.

The loss of lights, refrigerators, washers and dryers, computers and electronic devices, and more make residential power outages both irritating and disruptive– there are a number of steps you can take to fix the situation.

Diagnose the Problem

There are many reasons you may have lost power.

First, something may have caused an interruption of power from your provider.  In addition, Colorado thunderstorms can cause a disruption , or it could be a problem with a circuit or other electrical system in your home. Loose connectors, device failures, ground movement, underground root growth, or improper wire installation can all cause shorts or overloads as well.

If you have lost power, check with your neighbors to see if the power outage is widespread. If they don’t have power either, the problem is with your power provider, not the electrical systems in your home. Your power company should be informed, and you will have to wait for them to address the issue.

If the power outage is limited to your home, check your main breaker to see if it’s tripped. Flip the switch back on if it is tripped, which may restore your power. If you are only experiencing a partial power outage, you can try to turn on your electric dryer or range as a test. If it doesn’t turn on, or if the main switch trips again at any point, you will need a professional electrician to come and diagnose the specific problem you are having.

A Trusted Emergency Electrician in Arvada

If you have an electric car, you may have been excited with the idea of saving money on gas while doing something great for the environment. Unfortunately, your car may not be meeting your expectations. What many people don’t know about electric cars is the fact they can only go about 60 miles or so before they need recharged. If the car is out of juice, it will have to rely on gas and still cost you money. An electrician in Santa Monica, like those at The Electric Connection, can help you make your electric car work for you.

The electric cars are often sold with a standard, slow charger that runs on 120-volts. It can take about 24 hours for a car to be fully charged. It isn’t often you can sit at home for a full 24 hours to allow your car to become fully charged. Because of this, your electric car is not saving you as much money on your gas bill that it could be. You can opt to have a fast electric car charger, technically referred to as a Level II charger. You will need a Santa Monica electrician to install the proper outlet for the charger. This faster charger will charge your electric car in about 6 to 8 hours.

The Level II charger will require a 240-volt outlet to be plugged into. This isn’t a standard fixture in a garage. In fact, most homes only have one or two of these outlets and they are dedicated to the dryer and air conditioner. You invested in an electric car in order to decrease your dependency on gas. Make it work for you with the help of an electrician. Give The Electric Connection a call today and schedule your appointment to have a 240-volt outlet installed.

If you’re searching for a way to control your lighting from anywhere and without flipping a switch, Wi-Fi LED lights are the perfect products. With a Wi-Fi LED Controller Hub, you can control compatible LED bulbs, LED flood lights, and LED strip lights with your Android or iOS-enabled smartphone or tablet. The Milight 3.0 app, along with a Wi-Fi compatible controller when necessary—allows you to power lights on and off, control multiple zones of lights, select from thousands of colors, choose from various single-color and color changing modes, and control brightness and speed.

Wi-Fi compatible flood lights are great for landscape lighting, tree uplighting, architectural wall washing, and other outdoor applications. These LED landscape lights are available in 30- and 50-watt versions and have separate LEDs for either white or colorful illumination. They plug into a standard 3-prong outlet and can be easily connected to a Wi-Fi hub. Connect multiple lights to the hub, and synchronize their color, brightness, or mode with your smartphone or tablet.